OPA830ID vs OPA828ID 比較

詳細並排比較 OPA830ID 由 Texas Instruments 與 OPA828ID 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
OPA830ID OPA830ID - 110MHz Wideband Op Amp | Texas Instruments

OPA830ID - 110MHz Wideband Op Amp | Texas Instruments

OPA830ID ✓ 啟用中

規格比較

參數 OPA830ID OPA828ID
品牌 Texas Instruments Texas Instruments
類別 Amplifier ICs Amplifier ICs
生命週期狀態 啟用中 啟用中
單價 (USD) — $1.75
Amplifier Type Voltage-feedback operational amplifier JFET-input operational amplifier
Number of Channels 1 circuit 1
Gain-Bandwidth Product 110 MHz —
Single-Supply Operation 3 V or 5 V —
Additional Supply Configurations ±5 V or +10 V —
Input Voltage Noise Density 9.2 nV/√Hz 4 nV/√Hz at 1 kHz
Input Common-Mode Range Extends below the negative supply and to within 1.7 V of the positive supply —
Output Swing Within 25 mV of either supply —
Output Stage Complementary common-emitter —
Primary Application Fixed-gain line driver —
封裝 8-SOIC, 0.154 inch body width, 3.90 mm 8-SOIC (SO-8)
安裝類型 Surface mount Surface Mount
工作溫度 [DATA_NEEDED: operating temperature range] —
Input Offset Voltage [DATA_NEEDED: input offset voltage] 50 uV
Slew Rate [DATA_NEEDED: slew rate] 150 V/us
靜態電流 [DATA_NEEDED: quiescent current] —
RoHS 狀態 [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Gain Bandwidth Product — 45 MHz
Input Voltage Noise (0.1 Hz to 10 Hz) — 60 nVRMS
Input Bias Current — 1 pA (typical)
Input Offset Voltage Drift — 0.45 uV/C
Supply Voltage Range — ±4 V to ±18 V (36 V total)
輸出類型 — Rail-to-rail output (RRO)
Input Type — MUX-friendly JFET inputs
工作溫度範圍 — [DATA_NEEDED: operating temperature range]
Predecessor Parts — OPA627, OPA827

資料表與資源

瀏覽所有產品 建立 BOM 索取報價