OPA830ID vs OPA828ID Comparaison
Comparaison détaillée côte à côte de OPA830ID par Texas Instruments et OPA828ID par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
OPA828ID - 45MHz JFET Op Amp, 4nV/√Hz | TI | Precision Amplifier (Tape & Reel)
OPA828ID ✓ ActifComparaison des spécifications
| Paramètre | OPA830ID | OPA828ID |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Prix unitaire (USD) | — | $1,75 |
| Amplifier Type | Voltage-feedback operational amplifier | JFET-input operational amplifier |
| Number of Channels | 1 circuit | 1 |
| Gain-Bandwidth Product | 110 MHz | — |
| Single-Supply Operation | 3 V or 5 V | — |
| Additional Supply Configurations | ±5 V or +10 V | — |
| Input Voltage Noise Density | 9.2 nV/√Hz | 4 nV/√Hz at 1 kHz |
| Input Common-Mode Range | Extends below the negative supply and to within 1.7 V of the positive supply | — |
| Output Swing | Within 25 mV of either supply | — |
| Output Stage | Complementary common-emitter | — |
| Primary Application | Fixed-gain line driver | — |
| Boîtier | 8-SOIC, 0.154 inch body width, 3.90 mm | 8-SOIC (SO-8) |
| Type de montage | Surface mount | Surface Mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 50 uV |
| Slew Rate | [DATA_NEEDED: slew rate] | 150 V/us |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Gain Bandwidth Product | — | 45 MHz |
| Input Voltage Noise (0.1 Hz to 10 Hz) | — | 60 nVRMS |
| Input Bias Current | — | 1 pA (typical) |
| Input Offset Voltage Drift | — | 0.45 uV/C |
| Supply Voltage Range | — | ±4 V to ±18 V (36 V total) |
| Type de sortie | — | Rail-to-rail output (RRO) |
| Input Type | — | MUX-friendly JFET inputs |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Predecessor Parts | — | OPA627, OPA827 |