OPA830ID vs OPA828ID 比較
詳細な並列比較: OPA830ID メーカー: Texas Instruments および OPA828ID メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
OPA828ID - 45MHz JFET Op Amp, 4nV/√Hz | TI | Precision Amplifier (Tape & Reel)
OPA828ID ✓ 生産中仕様比較
| パラメータ | OPA830ID | OPA828ID |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| 単価(USD) | — | $1.75 |
| Amplifier Type | Voltage-feedback operational amplifier | JFET-input operational amplifier |
| Number of Channels | 1 circuit | 1 |
| Gain-Bandwidth Product | 110 MHz | — |
| Single-Supply Operation | 3 V or 5 V | — |
| Additional Supply Configurations | ±5 V or +10 V | — |
| Input Voltage Noise Density | 9.2 nV/√Hz | 4 nV/√Hz at 1 kHz |
| Input Common-Mode Range | Extends below the negative supply and to within 1.7 V of the positive supply | — |
| Output Swing | Within 25 mV of either supply | — |
| Output Stage | Complementary common-emitter | — |
| Primary Application | Fixed-gain line driver | — |
| パッケージ | 8-SOIC, 0.154 inch body width, 3.90 mm | 8-SOIC (SO-8) |
| 実装タイプ | Surface mount | Surface Mount |
| 動作温度 | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 50 uV |
| Slew Rate | [DATA_NEEDED: slew rate] | 150 V/us |
| 静止電流 | [DATA_NEEDED: quiescent current] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Gain Bandwidth Product | — | 45 MHz |
| Input Voltage Noise (0.1 Hz to 10 Hz) | — | 60 nVRMS |
| Input Bias Current | — | 1 pA (typical) |
| Input Offset Voltage Drift | — | 0.45 uV/C |
| Supply Voltage Range | — | ±4 V to ±18 V (36 V total) |
| 出力タイプ | — | Rail-to-rail output (RRO) |
| Input Type | — | MUX-friendly JFET inputs |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| Predecessor Parts | — | OPA627, OPA827 |