PCA9534APWR vs PCA9554PW Vergleich
Detaillierter Direktvergleich von PCA9534APWR von Texas Instruments und PCA9554PW von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
PCA9534APWR - 8-Bit I2C I/O Expander | Texas Instruments (Tape & Reel)
PCA9534APWR ✓ AktivSpezifikationsvergleich
| Parameter | PCA9534APWR | PCA9554PW |
|---|---|---|
| Marke | Texas Instruments | NXP Semiconductors |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of I/O Lines | 8 lines | — |
| I/O Port Width | 8 bits | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| I2C/SMBus Maximum Frequency | 400 kHz | 400 kHz |
| Schnittstellentyp | I2C and SMBus | — |
| Interrupt Output | Active-low, open-drain | — |
| Configuration Registers | 8-bit | — |
| Hardware Address Inputs | 3 inputs | — |
| Maximum Devices per Bus | 8 devices | — |
| Standby Current Consumption | 1 uA maximum | — |
| Betriebstemperaturbereich | -40 °C to 85 °C | — |
| Gehäuse | 16-pin TSSOP | 16-pin TSSOP |
| Pin-Anzahl | 16 pins | — |
| Montageart | Surface mount | Surface mount |
| Device Type | General-purpose I/O expander | — |
| Bus Addressing | Hardware-selectable I2C address | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | 8-bit I2C/SMBus I/O expander with interrupt |
| Number of GPIO | — | 8 bits |
| I2C/SMBus Supported Frequency | — | 100 kHz and 400 kHz |
| Schnittstelle | — | I2C-bus/SMBus |
| Interrupt Support | — | Yes |
| Port Register Features | — | Input/output and polarity configuration registers |
| Pull-Up Capability | — | Weak pull-up |
| Address Difference | — | PCA9554A has a different address |
| Betriebstemperatur | — | [DATA_NEEDED: Operating temperature range] |
| Maximum Output Current per Pin | — | [DATA_NEEDED: Maximum output current per pin] |
| Input Voltage Levels | — | [DATA_NEEDED: Input voltage thresholds] |
| Output Drive Capability | — | [DATA_NEEDED: Output drive current and output voltage characteristics] |
| Standby Current | — | [DATA_NEEDED: Standby current] |
| Operating Current | — | [DATA_NEEDED: Typical and maximum operating current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |