PCA9534APWR vs PCA9554PW 비교
다음의 상세 나란히 비교: PCA9534APWR 제조: Texas Instruments 및 PCA9554PW 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
PCA9534APWR - 8-Bit I2C I/O Expander | Texas Instruments (Tape & Reel)
PCA9534APWR ✓ 활성사양 비교
| 파라미터 | PCA9534APWR | PCA9554PW |
|---|---|---|
| 브랜드 | Texas Instruments | NXP Semiconductors |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Number of I/O Lines | 8 lines | — |
| I/O Port Width | 8 bits | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| I2C/SMBus Maximum Frequency | 400 kHz | 400 kHz |
| 인터페이스 유형 | I2C and SMBus | — |
| Interrupt Output | Active-low, open-drain | — |
| Configuration Registers | 8-bit | — |
| Hardware Address Inputs | 3 inputs | — |
| Maximum Devices per Bus | 8 devices | — |
| Standby Current Consumption | 1 uA maximum | — |
| 동작 온도 범위 | -40 °C to 85 °C | — |
| 패키지 | 16-pin TSSOP | 16-pin TSSOP |
| 핀 수 | 16 pins | — |
| 실장 유형 | Surface mount | Surface mount |
| Device Type | General-purpose I/O expander | — |
| Bus Addressing | Hardware-selectable I2C address | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | 8-bit I2C/SMBus I/O expander with interrupt |
| Number of GPIO | — | 8 bits |
| I2C/SMBus Supported Frequency | — | 100 kHz and 400 kHz |
| 인터페이스 | — | I2C-bus/SMBus |
| Interrupt Support | — | Yes |
| Port Register Features | — | Input/output and polarity configuration registers |
| Pull-Up Capability | — | Weak pull-up |
| Address Difference | — | PCA9554A has a different address |
| 동작 온도 | — | [DATA_NEEDED: Operating temperature range] |
| Maximum Output Current per Pin | — | [DATA_NEEDED: Maximum output current per pin] |
| Input Voltage Levels | — | [DATA_NEEDED: Input voltage thresholds] |
| Output Drive Capability | — | [DATA_NEEDED: Output drive current and output voltage characteristics] |
| Standby Current | — | [DATA_NEEDED: Standby current] |
| Operating Current | — | [DATA_NEEDED: Typical and maximum operating current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |