PCA9534APWR vs PCA9554PW Comparaison
Comparaison détaillée côte à côte de PCA9534APWR par Texas Instruments et PCA9554PW par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
PCA9534APWR - 8-Bit I2C I/O Expander | Texas Instruments (Tape & Reel)
PCA9534APWR ✓ ActifComparaison des spécifications
| Paramètre | PCA9534APWR | PCA9554PW |
|---|---|---|
| Marque | Texas Instruments | NXP Semiconductors |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of I/O Lines | 8 lines | — |
| I/O Port Width | 8 bits | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| I2C/SMBus Maximum Frequency | 400 kHz | 400 kHz |
| Type d'interface | I2C and SMBus | — |
| Interrupt Output | Active-low, open-drain | — |
| Configuration Registers | 8-bit | — |
| Hardware Address Inputs | 3 inputs | — |
| Maximum Devices per Bus | 8 devices | — |
| Standby Current Consumption | 1 uA maximum | — |
| Plage de température de fonctionnement | -40 °C to 85 °C | — |
| Boîtier | 16-pin TSSOP | 16-pin TSSOP |
| Nombre de broches | 16 pins | — |
| Type de montage | Surface mount | Surface mount |
| Device Type | General-purpose I/O expander | — |
| Bus Addressing | Hardware-selectable I2C address | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | 8-bit I2C/SMBus I/O expander with interrupt |
| Number of GPIO | — | 8 bits |
| I2C/SMBus Supported Frequency | — | 100 kHz and 400 kHz |
| Interface | — | I2C-bus/SMBus |
| Interrupt Support | — | Yes |
| Port Register Features | — | Input/output and polarity configuration registers |
| Pull-Up Capability | — | Weak pull-up |
| Address Difference | — | PCA9554A has a different address |
| Température de fonctionnement | — | [DATA_NEEDED: Operating temperature range] |
| Maximum Output Current per Pin | — | [DATA_NEEDED: Maximum output current per pin] |
| Input Voltage Levels | — | [DATA_NEEDED: Input voltage thresholds] |
| Output Drive Capability | — | [DATA_NEEDED: Output drive current and output voltage characteristics] |
| Standby Current | — | [DATA_NEEDED: Standby current] |
| Operating Current | — | [DATA_NEEDED: Typical and maximum operating current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |