PCA9534APWR vs PCA9554PW Karşılaştırma
Ayrıntılı yan yana karşılaştırma PCA9534APWR tarafından Texas Instruments ve PCA9554PW tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
PCA9534APWR - 8-Bit I2C I/O Expander | Texas Instruments (Tape & Reel)
PCA9534APWR ✓ AktifÖzellik Karşılaştırması
| Parametre | PCA9534APWR | PCA9554PW |
|---|---|---|
| Marka | Texas Instruments | NXP Semiconductors |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Number of I/O Lines | 8 lines | — |
| I/O Port Width | 8 bits | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| I2C/SMBus Maximum Frequency | 400 kHz | 400 kHz |
| Arayüz Türü | I2C and SMBus | — |
| Interrupt Output | Active-low, open-drain | — |
| Configuration Registers | 8-bit | — |
| Hardware Address Inputs | 3 inputs | — |
| Maximum Devices per Bus | 8 devices | — |
| Standby Current Consumption | 1 uA maximum | — |
| İşletim Sıcaklığı Aralığı | -40 °C to 85 °C | — |
| Paket | 16-pin TSSOP | 16-pin TSSOP |
| Pin Sayısı | 16 pins | — |
| Montaj Türü | Surface mount | Surface mount |
| Device Type | General-purpose I/O expander | — |
| Bus Addressing | Hardware-selectable I2C address | — |
| RoHS Durumu | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | 8-bit I2C/SMBus I/O expander with interrupt |
| Number of GPIO | — | 8 bits |
| I2C/SMBus Supported Frequency | — | 100 kHz and 400 kHz |
| Arayüz | — | I2C-bus/SMBus |
| Interrupt Support | — | Yes |
| Port Register Features | — | Input/output and polarity configuration registers |
| Pull-Up Capability | — | Weak pull-up |
| Address Difference | — | PCA9554A has a different address |
| İşletim Sıcaklığı | — | [DATA_NEEDED: Operating temperature range] |
| Maximum Output Current per Pin | — | [DATA_NEEDED: Maximum output current per pin] |
| Input Voltage Levels | — | [DATA_NEEDED: Input voltage thresholds] |
| Output Drive Capability | — | [DATA_NEEDED: Output drive current and output voltage characteristics] |
| Standby Current | — | [DATA_NEEDED: Standby current] |
| Operating Current | — | [DATA_NEEDED: Typical and maximum operating current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |