SN65HVD37D vs SN65HVD52D Vergleich
Detaillierter Direktvergleich von SN65HVD37D von Texas Instruments und SN65HVD52D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)
SN65HVD37D ✓ AktivTexas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD37D | SN65HVD52D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | Transceiver (1 driver / 1 receiver) | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1 / 1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3 V to 3.6 V (nominal 3.3 V) | — |
| Signaling Rate | Up to 25 Mbps | — |
| Receiver Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Bus-Pin ESD Protection (HBM) | >15 kV HBM | — |
| Receiver Hysteresis | 60 mV (typical) | — |
| Quiescent Current (active) | 1 mA (typical) | — |
| Standby / Shutdown Current | <1 uA (typical) | — |
| Betriebstemperatur | -40 C to +85 C | -40 C to +85 C |
| Gehäuse | 14-SOIC (D), 0.154" / 3.90 mm width | 8-pin SOIC (D) |
| Montageart | Surface Mount | Surface mount |
| RoHS / Lead-Free | RoHS compliant, lead-free (per TI product page) | — |
| Fail-Safe Receiver | Yes (idle/open/short safe) | — |
| Driver / Receiver Enable | Independent DE and RE pins | — |
| Product Type | — | RS-485 / RS-422 full-duplex transceiver |
| Driver / Receiver Count | — | 1 driver and 1 receiver |
| Datenrate | — | 1 Mbps |
| Versorgungsspannung | — | 5 V |
| Maximum Supply Voltage | — | 5.5 V |
| Driver Configuration | — | Full-duplex |
| Bus Standard | — | RS-485 and RS-422 |
| Unit Load | — | 1/8 unit-load option |
| Maximum Bus Nodes | — | Up to 256 nodes |
| Bus-Pin ESD Protection | — | Exceeds 15 kV HBM |
| Standby Current | — | 1 uA |
| Maximum Transmit Delay | — | 230 ns |
| Maximum Supply Current | — | 8 mA |
| Interface Standard | — | EIA-485-A |
| RoHS-Status | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |