SN65HVD37D vs SN65HVD52D 比較

詳細並排比較 SN65HVD37D 由 Texas Instruments 與 SN65HVD52D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
SN65HVD37D SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)

SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)

SN65HVD37D ✓ 啟用中

規格比較

參數 SN65HVD37D SN65HVD52D
品牌 Texas Instruments Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Device Type Transceiver (1 driver / 1 receiver) —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1 / 1 —
Duplex Full —
Supply Voltage (VCC) 3 V to 3.6 V (nominal 3.3 V) —
Signaling Rate Up to 25 Mbps —
Receiver Unit Load 1/8 unit load (up to 256 nodes) —
Bus-Pin ESD Protection (HBM) >15 kV HBM —
Receiver Hysteresis 60 mV (typical) —
Quiescent Current (active) 1 mA (typical) —
Standby / Shutdown Current <1 uA (typical) —
工作溫度 -40 C to +85 C -40 C to +85 C
封裝 14-SOIC (D), 0.154" / 3.90 mm width 8-pin SOIC (D)
安裝類型 Surface Mount Surface mount
RoHS / Lead-Free RoHS compliant, lead-free (per TI product page) —
Fail-Safe Receiver Yes (idle/open/short safe) —
Driver / Receiver Enable Independent DE and RE pins —
Product Type — RS-485 / RS-422 full-duplex transceiver
Driver / Receiver Count — 1 driver and 1 receiver
資料速率 — 1 Mbps
供應電壓 — 5 V
Maximum Supply Voltage — 5.5 V
Driver Configuration — Full-duplex
Bus Standard — RS-485 and RS-422
Unit Load — 1/8 unit-load option
Maximum Bus Nodes — Up to 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Standby Current — 1 uA
Maximum Transmit Delay — 230 ns
Maximum Supply Current — 8 mA
Interface Standard — EIA-485-A
RoHS 狀態 — [DATA_NEEDED: RoHS compliance status]
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價