SN65HVD37D vs SN65HVD52D So sánh

So sánh chi tiết song song của SN65HVD37D bằng Texas Instruments và SN65HVD52D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD37D SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)

SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)

SN65HVD37D ✓ Hoạt động
Texas Instruments
SN65HVD52D SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD52D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD37D SN65HVD52D
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Device Type Transceiver (1 driver / 1 receiver) —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1 / 1 —
Duplex Full —
Supply Voltage (VCC) 3 V to 3.6 V (nominal 3.3 V) —
Signaling Rate Up to 25 Mbps —
Receiver Unit Load 1/8 unit load (up to 256 nodes) —
Bus-Pin ESD Protection (HBM) >15 kV HBM —
Receiver Hysteresis 60 mV (typical) —
Quiescent Current (active) 1 mA (typical) —
Standby / Shutdown Current <1 uA (typical) —
Nhiệt độ hoạt động -40 C to +85 C -40 C to +85 C
Hộp 14-SOIC (D), 0.154" / 3.90 mm width 8-pin SOIC (D)
Kiểu lắp đặt Surface Mount Surface mount
RoHS / Lead-Free RoHS compliant, lead-free (per TI product page) —
Fail-Safe Receiver Yes (idle/open/short safe) —
Driver / Receiver Enable Independent DE and RE pins —
Product Type — RS-485 / RS-422 full-duplex transceiver
Driver / Receiver Count — 1 driver and 1 receiver
Tốc độ dữ liệu — 1 Mbps
Điện áp cung cấp — 5 V
Maximum Supply Voltage — 5.5 V
Driver Configuration — Full-duplex
Bus Standard — RS-485 and RS-422
Unit Load — 1/8 unit-load option
Maximum Bus Nodes — Up to 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Standby Current — 1 uA
Maximum Transmit Delay — 230 ns
Maximum Supply Current — 8 mA
Interface Standard — EIA-485-A
Trạng thái RoHS — [DATA_NEEDED: RoHS compliance status]
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá