SN65HVD37D vs SN65HVD52D 比較

詳細な並列比較: SN65HVD37D メーカー: Texas Instruments および SN65HVD52D メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Texas Instruments
SN65HVD37D SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)

SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)

SN65HVD37D ✓ 生産中

仕様比較

パラメータ SN65HVD37D SN65HVD52D
ブランド Texas Instruments Texas Instruments
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Device Type Transceiver (1 driver / 1 receiver) —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1 / 1 —
Duplex Full —
Supply Voltage (VCC) 3 V to 3.6 V (nominal 3.3 V) —
Signaling Rate Up to 25 Mbps —
Receiver Unit Load 1/8 unit load (up to 256 nodes) —
Bus-Pin ESD Protection (HBM) >15 kV HBM —
Receiver Hysteresis 60 mV (typical) —
Quiescent Current (active) 1 mA (typical) —
Standby / Shutdown Current <1 uA (typical) —
動作温度 -40 C to +85 C -40 C to +85 C
パッケージ 14-SOIC (D), 0.154" / 3.90 mm width 8-pin SOIC (D)
実装タイプ Surface Mount Surface mount
RoHS / Lead-Free RoHS compliant, lead-free (per TI product page) —
Fail-Safe Receiver Yes (idle/open/short safe) —
Driver / Receiver Enable Independent DE and RE pins —
Product Type — RS-485 / RS-422 full-duplex transceiver
Driver / Receiver Count — 1 driver and 1 receiver
データレート — 1 Mbps
電源電圧 — 5 V
Maximum Supply Voltage — 5.5 V
Driver Configuration — Full-duplex
Bus Standard — RS-485 and RS-422
Unit Load — 1/8 unit-load option
Maximum Bus Nodes — Up to 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Standby Current — 1 uA
Maximum Transmit Delay — 230 ns
Maximum Supply Current — 8 mA
Interface Standard — EIA-485-A
RoHS ステータス — [DATA_NEEDED: RoHS compliance status]
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼