SN75174DW vs SN65HVD78D Vergleich
Detaillierter Direktvergleich von SN75174DW von Texas Instruments und SN65HVD78D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | SN75174DW | SN65HVD78D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | USB Interface ICs | USB Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | Quadruple differential line driver | — |
| Number of Drivers | 4 | — |
| Logic Direction | 4/0 driver | — |
| Output State | 3-state | — |
| Supported Standards | ANSI EIA/TIA-422-B, RS-485, and ITU Recommendation V.11 | — |
| Maximum Data Rate | 4 megabaud | — |
| Supply Voltage Range | 4.75 V to 5.25 V | 3 V to 3.6 V |
| Output Common-Mode Range | Wide positive and negative range; exact limits not provided in the verified data | — |
| Topologie | Balanced multipoint bus | — |
| Gehäuse | 20-pin SOIC | 8-pin SOIC |
| Package Designation | 20-SOIC | — |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Enable Control | Common driver enable | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| Production Status | SN75174 listed as an active product on TI; SN75174DW listed as obsolete by TI carrier-option page | — |
| Product Type | — | 3.3 V half-duplex RS-485 transceiver |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 50 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Bus Standard | — | RS-485 |
| ESD Protection | — | Human Body Model and IEC Contact Discharge on bus pins |
| IEC Contact Discharge Protection | — | ±12 kV |
| Fault Protection Voltage | — | -13 V to +16.5 V |