SN75174DW vs SN65HVD78D Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng SN75174DW sa pamamagitan ng Texas Instruments at SN65HVD78D sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
SN75174DW - 4-Channel RS-422/RS-485 Driver | Texas Instruments
SN75174DW ✓ Nakahanda
Pagsanggunian na paghahambing
| Parametro | SN75174DW | SN65HVD78D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | USB Interface ICs | USB Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Device Type | Quadruple differential line driver | — |
| Number of Drivers | 4 | — |
| Logic Direction | 4/0 driver | — |
| Output State | 3-state | — |
| Supported Standards | ANSI EIA/TIA-422-B, RS-485, and ITU Recommendation V.11 | — |
| Maximum Data Rate | 4 megabaud | — |
| Supply Voltage Range | 4.75 V to 5.25 V | 3 V to 3.6 V |
| Output Common-Mode Range | Wide positive and negative range; exact limits not provided in the verified data | — |
| Topolohiya | Balanced multipoint bus | — |
| Packhaging | 20-pin SOIC | 8-pin SOIC |
| Package Designation | 20-SOIC | — |
| Uri ng Pagpapasok | Surface mount | Surface mount |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Enable Control | Common driver enable | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| Production Status | SN75174 listed as an active product on TI; SN75174DW listed as obsolete by TI carrier-option page | — |
| Product Type | — | 3.3 V half-duplex RS-485 transceiver |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 50 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Bus Standard | — | RS-485 |
| ESD Protection | — | Human Body Model and IEC Contact Discharge on bus pins |
| IEC Contact Discharge Protection | — | ±12 kV |
| Fault Protection Voltage | — | -13 V to +16.5 V |