SN75174DW vs SN65HVD78D موازنہ
تفصیلی ساتھ ساتھ موازنہ از SN75174DW بذریعہ Texas Instruments اور SN65HVD78D بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | SN75174DW | SN65HVD78D |
|---|---|---|
| برانڈ | Texas Instruments | Texas Instruments |
| زمرہ | USB Interface ICs | USB Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Device Type | Quadruple differential line driver | — |
| Number of Drivers | 4 | — |
| Logic Direction | 4/0 driver | — |
| Output State | 3-state | — |
| Supported Standards | ANSI EIA/TIA-422-B, RS-485, and ITU Recommendation V.11 | — |
| Maximum Data Rate | 4 megabaud | — |
| Supply Voltage Range | 4.75 V to 5.25 V | 3 V to 3.6 V |
| Output Common-Mode Range | Wide positive and negative range; exact limits not provided in the verified data | — |
| ٹوپولوجی | Balanced multipoint bus | — |
| پیکیج | 20-pin SOIC | 8-pin SOIC |
| Package Designation | 20-SOIC | — |
| ماؤنٹنگ ٹائپ | Surface mount | Surface mount |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Enable Control | Common driver enable | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| Production Status | SN75174 listed as an active product on TI; SN75174DW listed as obsolete by TI carrier-option page | — |
| Product Type | — | 3.3 V half-duplex RS-485 transceiver |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 50 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Bus Standard | — | RS-485 |
| ESD Protection | — | Human Body Model and IEC Contact Discharge on bus pins |
| IEC Contact Discharge Protection | — | ±12 kV |
| Fault Protection Voltage | — | -13 V to +16.5 V |