SN75174DW vs SN65HVD78D Comparaison
Comparaison détaillée côte à côte de SN75174DW par Texas Instruments et SN65HVD78D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | SN75174DW | SN65HVD78D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | USB Interface ICs | USB Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Quadruple differential line driver | — |
| Number of Drivers | 4 | — |
| Logic Direction | 4/0 driver | — |
| Output State | 3-state | — |
| Supported Standards | ANSI EIA/TIA-422-B, RS-485, and ITU Recommendation V.11 | — |
| Maximum Data Rate | 4 megabaud | — |
| Supply Voltage Range | 4.75 V to 5.25 V | 3 V to 3.6 V |
| Output Common-Mode Range | Wide positive and negative range; exact limits not provided in the verified data | — |
| Topologie | Balanced multipoint bus | — |
| Boîtier | 20-pin SOIC | 8-pin SOIC |
| Package Designation | 20-SOIC | — |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Enable Control | Common driver enable | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| Production Status | SN75174 listed as an active product on TI; SN75174DW listed as obsolete by TI carrier-option page | — |
| Product Type | — | 3.3 V half-duplex RS-485 transceiver |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 50 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Bus Standard | — | RS-485 |
| ESD Protection | — | Human Body Model and IEC Contact Discharge on bus pins |
| IEC Contact Discharge Protection | — | ±12 kV |
| Fault Protection Voltage | — | -13 V to +16.5 V |