TCA9554DWT vs TCA9554DWR Vergleich
Detaillierter Direktvergleich von TCA9554DWT von Texas Instruments und TCA9554DWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TCA9554DWT | TCA9554DWR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | 8-bit I2C/SMBus I/O expander | — |
| Number of I/O Lines | 8 lines | — |
| Operating Supply Voltage Range | 1.65 V to 5.5 V | 1.65 V to 5.5 V |
| Schnittstelle | I2C/SMBus | — |
| Maximum I2C Clock Frequency | 400 kHz | 400 kHz |
| Supported Standard-Mode Clock Frequency | 100 kHz | — |
| Supported Fast-Mode Clock Frequency | 400 kHz | — |
| Anzahl der Pins | 16 pins | — |
| Gehäuse | 16-pin SOIC | 16-pin SOIC |
| General-Purpose Input Ports | 8 configurable input lines | — |
| General-Purpose Output Ports | 8 configurable output lines | — |
| Interrupt Output | Yes | 1 open-drain interrupt output |
| Address Configuration Inputs | 3 address pins | — |
| Internal Pull-Up Capability | Weak pull-ups | — |
| Configuration Registers | Input, output, and polarity-inversion configuration registers | 8-bit input and output configuration registers |
| Montageart | Surface mount | Surface mount |
| RoHS-Status | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Number of I/O Ports | — | 8 ports |
| I/O Direction | — | Configurable input or output |
| Schnittstellentyp | — | I2C/SMBus |
| Hardware Address Inputs | — | 3 inputs, A0/A1/A2 |
| Maximum Devices per I2C Bus | — | 8 devices |
| Input Pull-Up Capability | — | Weak pull-ups |
| Input Logic Levels | — | [DATA_NEEDED: input voltage thresholds] |
| Output Logic Levels | — | [DATA_NEEDED: output voltage levels] |
| Output Drive Current | — | [DATA_NEEDED: output sink and source current] |
| Standby Current | — | [DATA_NEEDED: standby current] |
| Power-On Reset | — | Device returns to default state when supply voltage is cycled |