TCA9554DWT vs TCA9554DWR 比較
詳細並排比較 TCA9554DWT 由 Texas Instruments 與 TCA9554DWR 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | TCA9554DWT | TCA9554DWR |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Device Type | 8-bit I2C/SMBus I/O expander | — |
| Number of I/O Lines | 8 lines | — |
| Operating Supply Voltage Range | 1.65 V to 5.5 V | 1.65 V to 5.5 V |
| 介面 | I2C/SMBus | — |
| Maximum I2C Clock Frequency | 400 kHz | 400 kHz |
| Supported Standard-Mode Clock Frequency | 100 kHz | — |
| Supported Fast-Mode Clock Frequency | 400 kHz | — |
| 腳位數 | 16 pins | — |
| 封裝 | 16-pin SOIC | 16-pin SOIC |
| General-Purpose Input Ports | 8 configurable input lines | — |
| General-Purpose Output Ports | 8 configurable output lines | — |
| Interrupt Output | Yes | 1 open-drain interrupt output |
| Address Configuration Inputs | 3 address pins | — |
| Internal Pull-Up Capability | Weak pull-ups | — |
| Configuration Registers | Input, output, and polarity-inversion configuration registers | 8-bit input and output configuration registers |
| 安裝類型 | Surface mount | Surface mount |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 供應電流 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Number of I/O Ports | — | 8 ports |
| I/O Direction | — | Configurable input or output |
| 介面類型 | — | I2C/SMBus |
| Hardware Address Inputs | — | 3 inputs, A0/A1/A2 |
| Maximum Devices per I2C Bus | — | 8 devices |
| Input Pull-Up Capability | — | Weak pull-ups |
| Input Logic Levels | — | [DATA_NEEDED: input voltage thresholds] |
| Output Logic Levels | — | [DATA_NEEDED: output voltage levels] |
| Output Drive Current | — | [DATA_NEEDED: output sink and source current] |
| Standby Current | — | [DATA_NEEDED: standby current] |
| Power-On Reset | — | Device returns to default state when supply voltage is cycled |