TCA9554DWT vs TCA9554DWR Comparaison
Comparaison détaillée côte à côte de TCA9554DWT par Texas Instruments et TCA9554DWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TCA9554DWT | TCA9554DWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | 8-bit I2C/SMBus I/O expander | — |
| Number of I/O Lines | 8 lines | — |
| Operating Supply Voltage Range | 1.65 V to 5.5 V | 1.65 V to 5.5 V |
| Interface | I2C/SMBus | — |
| Maximum I2C Clock Frequency | 400 kHz | 400 kHz |
| Supported Standard-Mode Clock Frequency | 100 kHz | — |
| Supported Fast-Mode Clock Frequency | 400 kHz | — |
| Nombre de broches | 16 pins | — |
| Boîtier | 16-pin SOIC | 16-pin SOIC |
| General-Purpose Input Ports | 8 configurable input lines | — |
| General-Purpose Output Ports | 8 configurable output lines | — |
| Interrupt Output | Yes | 1 open-drain interrupt output |
| Address Configuration Inputs | 3 address pins | — |
| Internal Pull-Up Capability | Weak pull-ups | — |
| Configuration Registers | Input, output, and polarity-inversion configuration registers | 8-bit input and output configuration registers |
| Type de montage | Surface mount | Surface mount |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Number of I/O Ports | — | 8 ports |
| I/O Direction | — | Configurable input or output |
| Type d'interface | — | I2C/SMBus |
| Hardware Address Inputs | — | 3 inputs, A0/A1/A2 |
| Maximum Devices per I2C Bus | — | 8 devices |
| Input Pull-Up Capability | — | Weak pull-ups |
| Input Logic Levels | — | [DATA_NEEDED: input voltage thresholds] |
| Output Logic Levels | — | [DATA_NEEDED: output voltage levels] |
| Output Drive Current | — | [DATA_NEEDED: output sink and source current] |
| Standby Current | — | [DATA_NEEDED: standby current] |
| Power-On Reset | — | Device returns to default state when supply voltage is cycled |