TCA9554DWT vs TCA9554DWR तुलना
विस्तृत दोनों ओर की तुलना TCA9554DWT द्वारा Texas Instruments और TCA9554DWR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | TCA9554DWT | TCA9554DWR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Device Type | 8-bit I2C/SMBus I/O expander | — |
| Number of I/O Lines | 8 lines | — |
| Operating Supply Voltage Range | 1.65 V to 5.5 V | 1.65 V to 5.5 V |
| इंटरफ़ेस | I2C/SMBus | — |
| Maximum I2C Clock Frequency | 400 kHz | 400 kHz |
| Supported Standard-Mode Clock Frequency | 100 kHz | — |
| Supported Fast-Mode Clock Frequency | 400 kHz | — |
| पिन की संख्या | 16 pins | — |
| पैकेज | 16-pin SOIC | 16-pin SOIC |
| General-Purpose Input Ports | 8 configurable input lines | — |
| General-Purpose Output Ports | 8 configurable output lines | — |
| Interrupt Output | Yes | 1 open-drain interrupt output |
| Address Configuration Inputs | 3 address pins | — |
| Internal Pull-Up Capability | Weak pull-ups | — |
| Configuration Registers | Input, output, and polarity-inversion configuration registers | 8-bit input and output configuration registers |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| सप्लाई करंट | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Number of I/O Ports | — | 8 ports |
| I/O Direction | — | Configurable input or output |
| इंटरफ़ेस प्रकार | — | I2C/SMBus |
| Hardware Address Inputs | — | 3 inputs, A0/A1/A2 |
| Maximum Devices per I2C Bus | — | 8 devices |
| Input Pull-Up Capability | — | Weak pull-ups |
| Input Logic Levels | — | [DATA_NEEDED: input voltage thresholds] |
| Output Logic Levels | — | [DATA_NEEDED: output voltage levels] |
| Output Drive Current | — | [DATA_NEEDED: output sink and source current] |
| Standby Current | — | [DATA_NEEDED: standby current] |
| Power-On Reset | — | Device returns to default state when supply voltage is cycled |