TLE6250GXUMA1 vs SN65HVD230DR Vergleich
Detaillierter Direktvergleich von TLE6250GXUMA1 von Infineon und SN65HVD230DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ AktivSpezifikationsvergleich
| Parameter | TLE6250GXUMA1 | SN65HVD230DR |
|---|---|---|
| Marke | Infineon | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Obsolete | Aktiv |
| Product Type | High-speed CAN transceiver | CAN Bus Transceiver |
| CAN Protocol Compatibility | ISO 11898 | — |
| Maximum Data Rate | 1 MBd | 1 Mbps |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Operation | Full duplex | — |
| Receiver Hysteresis | 150 mV | — |
| Betriebstemperaturbereich | -40 °C to 160 °C | — |
| Gehäuse | PG-DSO-8, 8 pins | 8-SOIC (D) |
| Montageart | Surface mount | Surface Mount |
| Integrated Circuit Type | Transceiver | — |
| Bus Interface | CANbus differential half-duplex physical layer | — |
| Power-Down Feature | Standby mode disables transmitter and receiver | — |
| RoHS-Status | Compliant | Compliant |
| Lead-Free Assembly | Pb-free finish and Pb-free soldering supported | — |
| Soldering Standard | IPC/JEDEC J-STD-020 | — |
| Part Number | TLE6250GXUMA1 | — |
| Manufacturer | Infineon Technologies AG | — |
| Quiescent Supply Current | [DATA_NEEDED: Quiescent supply current] | — |
| Differential Input Voltage Range | [DATA_NEEDED: Differential input voltage range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: Common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: Propagation delay] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Bus Fault Protection | [DATA_NEEDED: Bus fault protection details] | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Versorgungsspannung | — | 3 V to 3.6 V (3.3 V nominal) |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| Betriebstemperatur | — | -40C to +85C |
| RS Pin Function | — | Slew-rate control via external resistor |