TLE6250GXUMA1 vs SN65HVD230DR Comparaison
Comparaison détaillée côte à côte de TLE6250GXUMA1 par Infineon et SN65HVD230DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActifComparaison des spécifications
| Paramètre | TLE6250GXUMA1 | SN65HVD230DR |
|---|---|---|
| Marque | Infineon | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Obsolete | Actif |
| Product Type | High-speed CAN transceiver | CAN Bus Transceiver |
| CAN Protocol Compatibility | ISO 11898 | — |
| Maximum Data Rate | 1 MBd | 1 Mbps |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Operation | Full duplex | — |
| Receiver Hysteresis | 150 mV | — |
| Plage de température de fonctionnement | -40 °C to 160 °C | — |
| Boîtier | PG-DSO-8, 8 pins | 8-SOIC (D) |
| Type de montage | Surface mount | Surface Mount |
| Integrated Circuit Type | Transceiver | — |
| Bus Interface | CANbus differential half-duplex physical layer | — |
| Power-Down Feature | Standby mode disables transmitter and receiver | — |
| Statut RoHS | Compliant | Compliant |
| Lead-Free Assembly | Pb-free finish and Pb-free soldering supported | — |
| Soldering Standard | IPC/JEDEC J-STD-020 | — |
| Part Number | TLE6250GXUMA1 | — |
| Manufacturer | Infineon Technologies AG | — |
| Quiescent Supply Current | [DATA_NEEDED: Quiescent supply current] | — |
| Differential Input Voltage Range | [DATA_NEEDED: Differential input voltage range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: Common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: Propagation delay] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Bus Fault Protection | [DATA_NEEDED: Bus fault protection details] | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Tension d'alimentation | — | 3 V to 3.6 V (3.3 V nominal) |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| Température de fonctionnement | — | -40C to +85C |
| RS Pin Function | — | Slew-rate control via external resistor |