TLE6250GXUMA1 vs SN65HVD230DR Comparación
Comparación detallada lado a lado de TLE6250GXUMA1 por Infineon y SN65HVD230DR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActivoComparación de especificaciones
| Parámetro | TLE6250GXUMA1 | SN65HVD230DR |
|---|---|---|
| Marca | Infineon | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Obsolete | Activo |
| Product Type | High-speed CAN transceiver | CAN Bus Transceiver |
| CAN Protocol Compatibility | ISO 11898 | — |
| Maximum Data Rate | 1 MBd | 1 Mbps |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Operation | Full duplex | — |
| Receiver Hysteresis | 150 mV | — |
| Rango de temperatura de funcionamiento | -40 °C to 160 °C | — |
| Encapsulado | PG-DSO-8, 8 pins | 8-SOIC (D) |
| Tipo de montaje | Surface mount | Surface Mount |
| Integrated Circuit Type | Transceiver | — |
| Bus Interface | CANbus differential half-duplex physical layer | — |
| Power-Down Feature | Standby mode disables transmitter and receiver | — |
| Estado RoHS | Compliant | Compliant |
| Lead-Free Assembly | Pb-free finish and Pb-free soldering supported | — |
| Soldering Standard | IPC/JEDEC J-STD-020 | — |
| Part Number | TLE6250GXUMA1 | — |
| Manufacturer | Infineon Technologies AG | — |
| Quiescent Supply Current | [DATA_NEEDED: Quiescent supply current] | — |
| Differential Input Voltage Range | [DATA_NEEDED: Differential input voltage range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: Common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: Propagation delay] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Bus Fault Protection | [DATA_NEEDED: Bus fault protection details] | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Tensión de alimentación | — | 3 V to 3.6 V (3.3 V nominal) |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| Temperatura de funcionamiento | — | -40C to +85C |
| RS Pin Function | — | Slew-rate control via external resistor |