TLE6250GXUMA1 vs SN65HVD230DR तुलना

विस्तृत दोनों ओर की तुलना TLE6250GXUMA1 द्वारा Infineon और SN65HVD230DR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
TLE6250GXUMA1 TLE6250GXUMA1 - 1 MBd CAN Transceiver | Infineon

TLE6250GXUMA1 - 1 MBd CAN Transceiver | Infineon

TLE6250GXUMA1 Obsolete
Texas Instruments
SN65HVD230DR SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments

SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments

SN65HVD230DR ✓ सक्रिय

विशेषता तुलना

पैरामीटर TLE6250GXUMA1 SN65HVD230DR
ब्रांड Infineon Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति Obsolete सक्रिय
Product Type High-speed CAN transceiver CAN Bus Transceiver
CAN Protocol Compatibility ISO 11898 —
Maximum Data Rate 1 MBd 1 Mbps
Supply Voltage Range 4.5 V to 5.5 V —
Number of Drivers 1 —
Number of Receivers 1 —
Duplex Operation Full duplex —
Receiver Hysteresis 150 mV —
ऑपरेटिंग तापमान रेंज -40 °C to 160 °C —
पैकेज PG-DSO-8, 8 pins 8-SOIC (D)
माउंटिंग प्रकार Surface mount Surface Mount
Integrated Circuit Type Transceiver —
Bus Interface CANbus differential half-duplex physical layer —
Power-Down Feature Standby mode disables transmitter and receiver —
RoHS स्थिति Compliant Compliant
Lead-Free Assembly Pb-free finish and Pb-free soldering supported —
Soldering Standard IPC/JEDEC J-STD-020 —
Part Number TLE6250GXUMA1 —
Manufacturer Infineon Technologies AG —
Quiescent Supply Current [DATA_NEEDED: Quiescent supply current] —
Differential Input Voltage Range [DATA_NEEDED: Differential input voltage range] —
Common-Mode Voltage Range [DATA_NEEDED: Common-mode voltage range] —
Propagation Delay [DATA_NEEDED: Propagation delay] —
ESD Protection [DATA_NEEDED: ESD protection rating] —
Bus Fault Protection [DATA_NEEDED: Bus fault protection details] —
Number of Drivers/Receivers — 1/1
Protocol — CANbus (ISO 11898-2)
सप्लाई वोल्टेज — 3 V to 3.6 V (3.3 V nominal)
Driver/Receiver Configuration — Half-Duplex
Standby Mode Supply Current — 370 uA typical
ESD Protection (Bus Pins, HBM) — Exceeds 16 kV
Maximum Nodes on Bus — 120 nodes
Receiver Common-Mode Range — -2 V to 7 V
ऑपरेटिंग तापमान — -40C to +85C
RS Pin Function — Slew-rate control via external resistor

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध