TLE7250G vs SN75176BD Vergleich
Detaillierter Direktvergleich von TLE7250G von Infineon und SN75176BD von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE7250G | SN75176BD |
|---|---|---|
| Marke | Infineon | Texas Instruments |
| Kategorie | RF Transceivers | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,15 |
| Product Type | High-speed CAN transceiver | Differential bus transceiver |
| Maximum CAN Data Rate | 1 Mbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Standard Compliance | ISO 11898-2 | — |
| Gehäuse | SOIC-8 | SOIC (D), 8 pins |
| Pin-Anzahl | 8 pins | 8 pins |
| Bus Outputs | CANH and CANL | — |
| Electromagnetic Emissions | Low EME | — |
| Electromagnetic Immunity | High EMI resistance | — |
| Power-Down Behavior | Excellent passive behavior | — |
| Short-Circuit Protection | CANH and CANL protected against shorts to GND or the positive supply | — |
| Automotive Qualification | AEC-Q100 qualified | [DATA_NEEDED: AEC-Q100 qualification] |
| RoHS Package Status | RoHS-compliant PG-DSO-8 package | — |
| Application Domain | Automotive and industrial CAN networks | — |
| Network Layer Interface | CAN protocol controller to physical CAN bus | — |
| Predecessor Compatibility | Pin assignment and function compatible with TLE6250G | — |
| Power-Down Use Case | Mixed-supply CAN networks | — |
| Betriebstemperaturbereich | [DATA_NEEDED: Operating temperature range] | 0 °C to 70 °C |
| Transceiver Receive Delay | [DATA_NEEDED: Transceiver receive delay] | — |
| Dominant Output Current | [DATA_NEEDED: CANH and CANL dominant output current] | — |
| Recessive Output Current | [DATA_NEEDED: CANH and CANL recessive output current] | — |
| Versorgungsspannung | — | 5 V |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Montageart | — | Surface mount |
| Manufacturer | — | Texas Instruments |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Ruhestrom | — | [DATA_NEEDED: quiescent current] |