TLE7250G vs SN75176BD Comparaison
Comparaison détaillée côte à côte de TLE7250G par Infineon et SN75176BD par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TLE7250G | SN75176BD |
|---|---|---|
| Marque | Infineon | Texas Instruments |
| Catégorie | RF Transceivers | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $0,15 |
| Product Type | High-speed CAN transceiver | Differential bus transceiver |
| Maximum CAN Data Rate | 1 Mbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Standard Compliance | ISO 11898-2 | — |
| Boîtier | SOIC-8 | SOIC (D), 8 pins |
| Nombre de broches | 8 pins | 8 pins |
| Bus Outputs | CANH and CANL | — |
| Electromagnetic Emissions | Low EME | — |
| Electromagnetic Immunity | High EMI resistance | — |
| Power-Down Behavior | Excellent passive behavior | — |
| Short-Circuit Protection | CANH and CANL protected against shorts to GND or the positive supply | — |
| Automotive Qualification | AEC-Q100 qualified | [DATA_NEEDED: AEC-Q100 qualification] |
| RoHS Package Status | RoHS-compliant PG-DSO-8 package | — |
| Application Domain | Automotive and industrial CAN networks | — |
| Network Layer Interface | CAN protocol controller to physical CAN bus | — |
| Predecessor Compatibility | Pin assignment and function compatible with TLE6250G | — |
| Power-Down Use Case | Mixed-supply CAN networks | — |
| Plage de température de fonctionnement | [DATA_NEEDED: Operating temperature range] | 0 °C to 70 °C |
| Transceiver Receive Delay | [DATA_NEEDED: Transceiver receive delay] | — |
| Dominant Output Current | [DATA_NEEDED: CANH and CANL dominant output current] | — |
| Recessive Output Current | [DATA_NEEDED: CANH and CANL recessive output current] | — |
| Tension d'alimentation | — | 5 V |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Type de montage | — | Surface mount |
| Manufacturer | — | Texas Instruments |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |