TLE7250G vs SN75176BD Сравнение

Подробное сравнение бок о бок TLE7250G от Infineon и SN75176BD от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

Infineon
TLE7250G TLE7250G - 1Mbps ISO 11898-2 CAN Transceiver | Infineon

TLE7250G - 1Mbps ISO 11898-2 CAN Transceiver | Infineon

TLE7250G ✓ Активен
Texas Instruments
SN75176BD SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)

SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)

SN75176BD ✓ Активен

Сравнение характеристик

Параметр TLE7250G SN75176BD
Бренд Infineon Texas Instruments
Категория RF Transceivers Interface ICs
Статус жизненного цикла Активен Активен
Наличие In Stock In Stock
Цена за единицу (USD) $0,00 $0,15
Product Type High-speed CAN transceiver Differential bus transceiver
Maximum CAN Data Rate 1 Mbps —
Supply Voltage Range 4.5 V to 5.5 V —
Standard Compliance ISO 11898-2 —
Корпус SOIC-8 SOIC (D), 8 pins
Число выводов 8 pins 8 pins
Bus Outputs CANH and CANL —
Electromagnetic Emissions Low EME —
Electromagnetic Immunity High EMI resistance —
Power-Down Behavior Excellent passive behavior —
Short-Circuit Protection CANH and CANL protected against shorts to GND or the positive supply —
Automotive Qualification AEC-Q100 qualified [DATA_NEEDED: AEC-Q100 qualification]
RoHS Package Status RoHS-compliant PG-DSO-8 package —
Application Domain Automotive and industrial CAN networks —
Network Layer Interface CAN protocol controller to physical CAN bus —
Predecessor Compatibility Pin assignment and function compatible with TLE6250G —
Power-Down Use Case Mixed-supply CAN networks —
Диапазон рабочих температур [DATA_NEEDED: Operating temperature range] 0 °C to 70 °C
Transceiver Receive Delay [DATA_NEEDED: Transceiver receive delay] —
Dominant Output Current [DATA_NEEDED: CANH and CANL dominant output current] —
Recessive Output Current [DATA_NEEDED: CANH and CANL recessive output current] —
Напряжение питания — 5 V
Supported Standards — TIA/EIA-422-B and TIA/EIA-485-A
ITU Recommendations — V.11 and X.27
Communication Mode — Bidirectional
Bus Architecture — Multipoint transmission
Transmission Line Type — Balanced transmission lines
Driver Output State — 3-state
Receiver Output State — 3-state
Тип монтажа — Surface mount
Manufacturer — Texas Instruments
Статус RoHS — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Input and Output Electrical Limits — [DATA_NEEDED: input and output electrical limits]
Propagation Delay — [DATA_NEEDED: propagation delay]
Ток покоя — [DATA_NEEDED: quiescent current]

Даташиты & ресурсы

Все товары Создать BOM Запросить цену