TLE7250G vs SN75176BD 比較

詳細な並列比較: TLE7250G メーカー: Infineon および SN75176BD メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Texas Instruments
SN75176BD SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)

SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)

SN75176BD ✓ 生産中

仕様比較

パラメータ TLE7250G SN75176BD
ブランド Infineon Texas Instruments
カテゴリ RF Transceivers Interface ICs
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $0.00 $0.15
Product Type High-speed CAN transceiver Differential bus transceiver
Maximum CAN Data Rate 1 Mbps —
Supply Voltage Range 4.5 V to 5.5 V —
Standard Compliance ISO 11898-2 —
パッケージ SOIC-8 SOIC (D), 8 pins
ピン数 8 pins 8 pins
Bus Outputs CANH and CANL —
Electromagnetic Emissions Low EME —
Electromagnetic Immunity High EMI resistance —
Power-Down Behavior Excellent passive behavior —
Short-Circuit Protection CANH and CANL protected against shorts to GND or the positive supply —
Automotive Qualification AEC-Q100 qualified [DATA_NEEDED: AEC-Q100 qualification]
RoHS Package Status RoHS-compliant PG-DSO-8 package —
Application Domain Automotive and industrial CAN networks —
Network Layer Interface CAN protocol controller to physical CAN bus —
Predecessor Compatibility Pin assignment and function compatible with TLE6250G —
Power-Down Use Case Mixed-supply CAN networks —
動作温度範囲 [DATA_NEEDED: Operating temperature range] 0 °C to 70 °C
Transceiver Receive Delay [DATA_NEEDED: Transceiver receive delay] —
Dominant Output Current [DATA_NEEDED: CANH and CANL dominant output current] —
Recessive Output Current [DATA_NEEDED: CANH and CANL recessive output current] —
電源電圧 — 5 V
Supported Standards — TIA/EIA-422-B and TIA/EIA-485-A
ITU Recommendations — V.11 and X.27
Communication Mode — Bidirectional
Bus Architecture — Multipoint transmission
Transmission Line Type — Balanced transmission lines
Driver Output State — 3-state
Receiver Output State — 3-state
実装タイプ — Surface mount
Manufacturer — Texas Instruments
RoHS ステータス — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Input and Output Electrical Limits — [DATA_NEEDED: input and output electrical limits]
Propagation Delay — [DATA_NEEDED: propagation delay]
静止電流 — [DATA_NEEDED: quiescent current]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼