VNS3NV04DPTR-E vs VNI4140K-32 Vergleich
Detaillierter Direktvergleich von VNS3NV04DPTR-E von STMicroelectronics und VNI4140K-32 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
VNS3NV04DPTR-E - OMNIFET II 40V 3.5A Power Switch | STMicroelectronics
VNS3NV04DPTR-E ✓ AktivSTMicroelectronics
VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics
VNI4140K-32 ✓ AktivSpezifikationsvergleich
| Parameter | VNS3NV04DPTR-E | VNI4140K-32 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,96 | $2,05 |
| Manufacturer | STMicroelectronics | — |
| Product Family | OMNIFET II | — |
| Process Technology | VIPower M0-3 | — |
| Device Type | Fully autoprotected low-side Power MOSFET switch | Quad high-side smart power solid-state relay |
| Channel Configuration | 2 x N-channel (dual independent or parallel) | — |
| Drain-Source Clamp Voltage | 40 V | — |
| On-State Resistance (Rds(on)) | 35 mOhm typical / 50 mOhm max | — |
| Continuous Drain Current | 3.5 A | — |
| Peak Drain Current | 12 A | — |
| Current Limitation (typ) | 3.5 A | — |
| Maximum Switching Frequency | 50 kHz (DC applications) | — |
| Betriebstemperaturbereich | -40 C to +150 C (junction) | — |
| Gehäuse | SO-8 (Tape & Reel) | PowerSSO-24 (24-pin with exposed thermal pad) |
| Montageart | Surface Mount | Surface Mount |
| Built-in Protections | Avalanche clamp, current limit, thermal shutdown, ESD gate protection | — |
| Automotive Qualified | Yes (per datasheet title variant) | — |
| RoHS-Status | Compliant | — |
| Number of Channels | — | 4 |
| Topologie | — | High-side switch (N-channel MOSFET) |
| Load Current per Channel | — | 1.0 A (continuous) |
| On-State Resistance (RDS(on)) | — | 0.08 ohm per channel |
| Supply Voltage (VCC) Max | — | 41 V |
| Ausgangskonfiguration | — | 1:1 N-Channel |
| Anzahl der Ausgänge | — | 4 |
| Diagnostics | — | Per-channel open-load, short-to-ground, thermal fault |
| Inductive Load Handling | — | Fast demagnetization (integrated) |
| Logic Input Compatibility | — | CMOS/TTL compatible logic inputs |
| Package Width | — | 7.50 mm (approximately 0.295 inch) |
| Industrial Standard Compliance | — | IEC 61131-2 |
| ESD Rating | — | 25 kV (per IEC standard, air discharge) |
| Technology | — | ST VIPower (vertical DMOS + CMOS/bipolar control) |