VNS3NV04DPTR-E vs VNI4140K-32 Comparaison
Comparaison détaillée côte à côte de VNS3NV04DPTR-E par STMicroelectronics et VNI4140K-32 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
VNS3NV04DPTR-E - OMNIFET II 40V 3.5A Power Switch | STMicroelectronics
VNS3NV04DPTR-E ✓ ActifSTMicroelectronics
VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics
VNI4140K-32 ✓ ActifComparaison des spécifications
| Paramètre | VNS3NV04DPTR-E | VNI4140K-32 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,96 | $2,05 |
| Manufacturer | STMicroelectronics | — |
| Product Family | OMNIFET II | — |
| Process Technology | VIPower M0-3 | — |
| Device Type | Fully autoprotected low-side Power MOSFET switch | Quad high-side smart power solid-state relay |
| Channel Configuration | 2 x N-channel (dual independent or parallel) | — |
| Drain-Source Clamp Voltage | 40 V | — |
| On-State Resistance (Rds(on)) | 35 mOhm typical / 50 mOhm max | — |
| Continuous Drain Current | 3.5 A | — |
| Peak Drain Current | 12 A | — |
| Current Limitation (typ) | 3.5 A | — |
| Maximum Switching Frequency | 50 kHz (DC applications) | — |
| Plage de température de fonctionnement | -40 C to +150 C (junction) | — |
| Boîtier | SO-8 (Tape & Reel) | PowerSSO-24 (24-pin with exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Built-in Protections | Avalanche clamp, current limit, thermal shutdown, ESD gate protection | — |
| Automotive Qualified | Yes (per datasheet title variant) | — |
| Statut RoHS | Compliant | — |
| Number of Channels | — | 4 |
| Topologie | — | High-side switch (N-channel MOSFET) |
| Load Current per Channel | — | 1.0 A (continuous) |
| On-State Resistance (RDS(on)) | — | 0.08 ohm per channel |
| Supply Voltage (VCC) Max | — | 41 V |
| Configuration de sortie | — | 1:1 N-Channel |
| Nombre de sorties | — | 4 |
| Diagnostics | — | Per-channel open-load, short-to-ground, thermal fault |
| Inductive Load Handling | — | Fast demagnetization (integrated) |
| Logic Input Compatibility | — | CMOS/TTL compatible logic inputs |
| Package Width | — | 7.50 mm (approximately 0.295 inch) |
| Industrial Standard Compliance | — | IEC 61131-2 |
| ESD Rating | — | 25 kV (per IEC standard, air discharge) |
| Technology | — | ST VIPower (vertical DMOS + CMOS/bipolar control) |