VNS3NV04DPTR-E vs VNI4140K-32 Comparación
Comparación detallada lado a lado de VNS3NV04DPTR-E por STMicroelectronics y VNI4140K-32 por STMicroelectronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
STMicroelectronics
VNS3NV04DPTR-E - OMNIFET II 40V 3.5A Power Switch | STMicroelectronics
VNS3NV04DPTR-E ✓ ActivoSTMicroelectronics
VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics
VNI4140K-32 ✓ ActivoComparación de especificaciones
| Parámetro | VNS3NV04DPTR-E | VNI4140K-32 |
|---|---|---|
| Marca | STMicroelectronics | STMicroelectronics |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,96 | $2,05 |
| Manufacturer | STMicroelectronics | — |
| Product Family | OMNIFET II | — |
| Process Technology | VIPower M0-3 | — |
| Device Type | Fully autoprotected low-side Power MOSFET switch | Quad high-side smart power solid-state relay |
| Channel Configuration | 2 x N-channel (dual independent or parallel) | — |
| Drain-Source Clamp Voltage | 40 V | — |
| On-State Resistance (Rds(on)) | 35 mOhm typical / 50 mOhm max | — |
| Continuous Drain Current | 3.5 A | — |
| Peak Drain Current | 12 A | — |
| Current Limitation (typ) | 3.5 A | — |
| Maximum Switching Frequency | 50 kHz (DC applications) | — |
| Rango de temperatura de funcionamiento | -40 C to +150 C (junction) | — |
| Encapsulado | SO-8 (Tape & Reel) | PowerSSO-24 (24-pin with exposed thermal pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Built-in Protections | Avalanche clamp, current limit, thermal shutdown, ESD gate protection | — |
| Automotive Qualified | Yes (per datasheet title variant) | — |
| Estado RoHS | Compliant | — |
| Number of Channels | — | 4 |
| Topología | — | High-side switch (N-channel MOSFET) |
| Load Current per Channel | — | 1.0 A (continuous) |
| On-State Resistance (RDS(on)) | — | 0.08 ohm per channel |
| Supply Voltage (VCC) Max | — | 41 V |
| Configuración de salida | — | 1:1 N-Channel |
| Número de salidas | — | 4 |
| Diagnostics | — | Per-channel open-load, short-to-ground, thermal fault |
| Inductive Load Handling | — | Fast demagnetization (integrated) |
| Logic Input Compatibility | — | CMOS/TTL compatible logic inputs |
| Package Width | — | 7.50 mm (approximately 0.295 inch) |
| Industrial Standard Compliance | — | IEC 61131-2 |
| ESD Rating | — | 25 kV (per IEC standard, air discharge) |
| Technology | — | ST VIPower (vertical DMOS + CMOS/bipolar control) |