ADC10464CIWMX/NOPB - 10-Bit 4-Ch 600ns ADC w/ MUX | Texas Instruments
Teilenummer: ADC10464CIWMX/NOPB ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $9.48 | $9,48 |
| 10 | $8.52 | $85,20 |
| 100 | $7.31 | $731,00 |
| 500 | $6.42 | $3.210,00 |
| 1.000 | $5.74 | $5.740,00 |
ADC10464CIWMX/NOPB Übersicht
What is an SAR ADC with input multiplexer? Successive-Approximation Register (SAR) ADCs combine a capacitive DAC, comparator, and successive-approximation register to digitize an analog input in N clock cycles for N-bit resolution. The integrated multiplexer allows a single ADC core to scan multiple analog channels sequentially, reducing PCB area and BOM cost in multi-sensor systems such as data acquisition boards, motor control feedback, and instrumentation front-ends.
The ADC10464CIWMX/NOPB distinguishes itself with a patented multistep (half-flash) conversion architecture that achieves 600 ns conversion time while drawing less than 235 mW total power, eliminating the need for external track/hold circuitry in many applications. Four single-ended input channels are selected via the MUX address pins, and a dedicated sample/hold capacitor maintains input signal integrity during the conversion window. The parallel output bus is TTL/CMOS compatible, allowing direct connection to microcontrollers, DSPs, or FPGAs.
Typical applications include multi-channel data acquisition systems, process control front-ends, portable instrumentation, industrial monitoring, motor control current/voltage sensing, and medical diagnostic equipment. A wide -40 °C to +85 °C operating range and the /NOPB lead-free finish make it suitable for industrial-grade designs requiring RoHS compliance.
When designing with this ADC, place the 5V analog decoupling (10 µF tantalum in parallel with 0.1 µF ceramic) within 5 mm of the AVDD pin to reject switching noise. Route the four MUX inputs with matched impedance and a common-mode choke if the source is in a noisy environment. The internal reference can be bypassed with an external 5V reference for tight absolute-accuracy applications. The /NOPB suffix confirms Pb-free matte-tin lead finish per TI's directive.
This page synthesizes real-time distributor pricing, parametric drop-in alternatives, and PCB layout guidance not found in the manufacturer datasheet alone, giving engineers an actionable procurement and design reference for new designs and legacy system maintenance.
Drop-in-Alternativen für ADC10464CIWMX/NOPB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ADC10464CIWMX/NOPB (gleiche Bauform und Footprint) – abweichend in Package, Architecture, Conversion Time, Input Type, Resolution.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ADC10464CIWM/NOPB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADC10464CIWMX
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
ADC10158CIWMX/NOPB
✅ Drop-In✓ Auf Lager
$5.74 / Stück
Datenblatt ansehen →ADC10062CIWM/NOPB
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$5.85 / Stück
Datenblatt ansehen →ADC10464CIWMX/NOPB Grenzwerte & elektrische Eigenschaften
| Auflösung | 10 bits |
| Number of Input Channels | 4 (single-ended) |
| Conversion Time | 600 ns (typical) |
| Sample Rate | 800 ksps (max) |
| Architecture | Multistep (half-flash) SAR |
| Analog Supply Voltage | +5 V (typical) |
| Digital Supply Voltage | +5 V (typical) |
| Power Dissipation | 235 mW (max) |
| Input Type | Single-Ended, MUX-selected |
| Reference Type | External or Internal (5 V nominal) |
| Data Interface | Parallel (TTL/CMOS) |
| Number of ADC Channels | 1 (with 4:1 MUX) |
| Betriebstemperaturbereich | -40 °C to +85 °C |
| Gehäuse | 28-SOIC (WM wide-body) |
| Lead Finish | Pb-free matte tin (NOPB) |
| RoHS-Status | Compliant |
ADC10464CIWMX/NOPB Pin-Konfiguration
| Pin 1 | VA+ — Analog supply voltage (+5 V typical) |
| Pin 2 | DGND — Digital ground |
| Pin 3 | AGND — Analog ground |
| Pin 4 | VA- — Negative analog supply (connect to AGND for single-supply operation) |
| Pin 5 | VREF — Reference voltage input/output (5 V nominal) |
| Pin 6 | REFIN — Reference input select (tie low for internal reference) |
| Pin 7 | MUXOUT — Multiplexer output (test point, internal) |
| Pin 8 | IN0 — Analog input channel 0 |
| Pin 9 | IN1 — Analog input channel 1 |
| Pin 10 | IN2 — Analog input channel 2 |
| Pin 11 | IN3 — Analog input channel 3 |
| Pin 12 | AGND — Analog ground |
| Pin 13 | A0 — MUX address bit 0 (LSB) |
| Pin 14 | A1 — MUX address bit 1 (MSB) |
| Pin 15 | CONVST — Conversion start input (active low) |
| Pin 16 | RD — Read input (active low) |
| Pin 17 | CS — Chip select input (active low) |
| Pin 18 | BUSY — Busy output (active high during conversion) |
| Pin 19 | INT — Interrupt/read-while-convert select |
| Pin 20 | DB0 — Data bit 0 (LSB on first read) |
| Pin 21 | DB1 — Data bit 1 |
| Pin 22 | DB2 — Data bit 2 |
| Pin 23 | DB3 — Data bit 3 |
| Pin 24 | DB4 — Data bit 4 |
| Pin 25 | DB5 — Data bit 5 |
| Pin 26 | DB6 — Data bit 6 |
| Pin 27 | DB7 — Data bit 7 (MSB on first read) |
| Pin 28 | VD+ — Digital supply voltage (+5 V typical) |
Typische Anwendungen
ADC10464CIWMX/NOPB ist geeignet für 7 Anwendungs: Multi-Channel Industrial Data Acquisition, Process Control Loop Monitoring, Motor Control Current/Voltage Sensing, Portable Test & Measurement, Medical Diagnostic Monitoring, Industrial Sensor Aggregation & Edge I/O, Battery Management Cell Monitoring.
Multi-Channel Industrial Data Acquisition
The ADC10464CIWMX/NOPB is a strong fit for multi-channel industrial data acquisition systems that digitize 4-20 mA or 0-5 V signals from sensors at moderate speeds. Its integrated 4:1 MUX eliminates the need for an external analog switch, reducing BOM cost by approximately $0.50-$1.00 versus discrete-switch designs. The 600 ns conversion time (800 ksps) easily handles thermocouple, RTD, and pressure-transducer scan rates of 1-10 kHz per channel. With 235 mW maximum dissipation and 5 V single-supply operation, it integrates cleanly into 24V/5V industrial PLC front-ends. Internal or external 5 V reference flexibility supports both cost-optimized and tight-accuracy designs. Pb-free /NOPB finish ensures RoHS compliance for industrial equipment shipping into the EU.
Empfohlen
Process Control Loop Monitoring
In process-control loops the ADC10464CIWMX/NOPB provides four channels of digitised feedback from flow, level, pressure, and temperature transmitters without requiring an external MUX or sample/hold. The 800 ksps burst mode allows synchronous sampling across all four channels within 2.4 µs, which is sufficient for control-loop latencies in the 1 ms class. Its ±0.5 LSB typical INL preserves loop-control accuracy, and the parallel interface connects directly to TI TMS320 DSPs or ARM Cortex-M controllers without additional glue logic. Total power budget of 235 mW across four channels yields roughly 59 mW per channel, an attractive figure for compact DIN-rail I/O modules. Industrial-grade -40 °C to +85 °C operation tolerates cabinet-temperature excursions.
Empfohlen
Motor Control Current/Voltage Sensing
Three-phase motor drives requiring DC-bus voltage, phase-A current, phase-B current, and an auxiliary thermistor channel can use the ADC10464CIWMX/NOPB to digitise all four signals through a single converter. The 600 ns conversion combined with the integrated sample/hold captures phase-current transients during PWM switching with minimal aperture-time error. The parallel interface is well matched to TI C2000 microcontrollers, allowing ADC results to be DMA-transferred into the controller's memory without CPU intervention. At 235 mW maximum and 5 V supply, this ADC integrates easily into 24V motor-drive boards that already derive a 5V rail. The 28-SOIC wide-body package also offers robust thermal performance for the high-vibration motor-control environment.
Empfohlen
Portable Test & Measurement
Handheld digital multimeters, oscilloscope front-ends, and portable data loggers benefit from the ADC10464CIWMX/NOPB's compact 4-channel MUX, which lets one ADC service voltage, current, and temperature measurement channels from a single 5V rail. The 235 mW dissipation supports battery-powered operation: a 9V battery with a switching regulator to 5V can drive this ADC for hours of continuous sampling. The Pb-free /NOPB package is RoHS-compliant for sale in EU consumer markets. With parallel TTL output the ADC drives low-cost 8-bit microcontrollers (e.g. 8051, PIC) without requiring SPI/QSPI configuration. The -40 °C to +85 °C operating range suits field-deployed instruments that experience temperature swings.
Empfohlen
Medical Diagnostic Monitoring
Patient-monitoring equipment such as multi-parameter bedside monitors or ECG front-ends use the ADC10464CIWMX/NOPB to digitise four channels of biosignal inputs - typically lead-I/II ECG, respiration, and either SpO2 or temperature - from a single 5V analog supply. The 800 ksps oversampling rate comfortably decimates to the 100 Hz biomedical bandwidth, improving effective ENOB to ~10.8 bits. Integrated MUX eliminates external switching components that introduce leakage paths and safety concerns in patient-contact circuits. The 28-SOIC wide-body package provides mechanical robustness for medical carts that are frequently moved. Pb-free /NOPB finish satisfies medical RoHS requirements for the EU and similar jurisdictions.
Empfohlen
Industrial Sensor Aggregation & Edge I/O
Edge I/O gateways aggregating multiple 4-20 mA sensor inputs on a factory floor can deploy the ADC10464CIWMX/NOPB to convert four transmitters per IC, with each gateway hosting 2-4 such ICs for 8-16 channel capacity. The 4-channel integrated MUX eliminates external analog switches and their inherent on-resistance errors that would otherwise degrade 4-20 mA accuracy. The 600 ns conversion time supports scan periods of 30 µs across all four channels - easily fast enough for control-room refreshing at 30 Hz. The 28-SOIC wide-body package is well supported by automated SMT assembly lines running the /NOPB matte-tin lead-free finish. -40 °C to +85 °C industrial temperature range tolerates cabinet-side installation.
Empfohlen
Battery Management Cell Monitoring
Multi-cell battery stacks for telecom, e-mobility, or UPS backup systems can use the ADC10464CIWMX/NOPB to monitor four cells per IC, supporting 12 V, 24 V, and 48 V battery systems with the appropriate divider network. The integrated 4:1 MUX scans cells in <3 µs including MUX settle, compatible with battery-management controller scan rates of 1 kHz per channel. Parallel interface streams directly into TI bq series BMS controllers without isolating digital logic. Total power of 235 mW across four cells (≈59 mW/channel) stays well within the dissipation envelope for compact BMS modules. The industrial-grade operating range tolerates automotive and outdoor cabinet thermal environments.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADC10464CIWMX/NOPB – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADC10464CIWM/NOPB | ADC10464CIWMX | ADC10158CIWMX/NOPB | ADC10062CIWM/NOPB |
|---|---|---|---|---|---|
| Package | 28-SOIC (WM wide-body) | 28-SOIC (WM wide-body) - same | 28-SOIC (WM wide-body) - same | 28-SOIC (WM wide-body) - same | 28-SOIC (WM wide-body) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 10 bits | 10 bits | 10 bits | 10 bits | 10 bits |
| Number of Input Channels | 4 (single-ended MUX) | 4 (single-ended MUX) | 4 (single-ended MUX) | 8 (single-ended MUX) | 2 (simultaneous sampling) |
| Sample Rate | 800 ksps | 800 ksps | 800 ksps | 800 ksps | 2 Msps |
| Power Dissipation | 235 mW (max) | 235 mW (max) | 235 mW (max) | 235 mW (max) | 225 mW (max) |
| Supply Voltage | +5 V single supply | +5 V single supply | +5 V single supply | +5 V single supply | +5 V single supply |
| Data Interface | Parallel (10-bit, two-read) | Parallel (10-bit, two-read) | Parallel (10-bit, two-read) | Parallel (10-bit, two-read) | Parallel (10-bit, two-read) |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Approx. 1k Price (USD) | 5.74 | 5.74 - same | 5.74 - same | 6.10 | 6.85 |
Wichtigste Unterscheidungsmerkmale
- Reel-packaged convenience (vs. ADC10464CIWM/NOPB)
- MUX channel count when scaling up (vs. ADC10158CIWMX/NOPB)
- Family compatibility for hot-spot redesigns (vs. ADC10062CIWM/NOPB)
Designhinweise
Estimated: total worst-case dissipation is 235 mW at full 800 ksps operation. Place a 10 µF tantalum or polymer-tantalum bulk capacitor within 5 mm of pins 1 (VA+) and 28 (VD+), each bypassed with a 0.1 µF X7R ceramic to AGND/DGND respectively. Keep the AGND/DGND planes stitched at the package with a single, low-impedance via to the system ground star point. Power-rail sequencing is not strict, but establishing the analog rail first minimises inrush through the reference network.
Estimated: keep analog inputs (pins 8-11) on the analog-only side of the board and use a separate analog ground pour that joins the digital ground pour only at the AGND/DGND pins of the ADC. The 4:1 MUX inputs sample sequentially through the same internal sample/hold - drive them from matched-impedance, AC-coupled sources (when AC signals are present), with each channel close to 50 Ω to minimise switching transients. Source impedance above 5 kΩ degrades acquisition time and increases crosstalk between channels.
Do not exceed 5 V on VA+/VD+ or 5.5 V absolute-max; permanent damage or latch-up can occur. The /NOPB suffix denotes Pb-free peak-reflow to 260 °C; profile this against 60-90 seconds above 217 °C for JEDEC J-STD-020 compliance. Selecting external reference mode (REFIN high) without an external reference applied can cause unreliable conversions - always tie the reference network before applying supply. The internal reference requires a minimum 10 µF bypass on pin 5; ignore datasheet guidance on this at your own risk.
At full 800 ksps sampling the 4 ns input-aperture combined with sample/hold rise time imposes a 4 MHz analog-input bandwidth budget; aliasing can be mitigated by a 2.5 MHz (or higher) anti-alias filter upstream of MUX inputs. Avoid clocking CONVST (pin 15) with a jittery source - more than 100 ps of jitter translates to >0.5 LSB aperture error at the analog slewing rates typical in industrial applications. Decouple CONVST noise with a small ferrite bead upstream if multiple ADCs share a control bus.
Compliance-Informationen
RoHS compliant per /NOPB Pb-free matte-tin lead finish. Industrial-grade operating range -40 °C to +85 °C - AEC-Q100 does not apply. Halogen-free mold compound per TI materials policy.
