ADC1613S080HN-C1 - 16-bit 80Msps JESD204A ADC | Renesas
Teilenummer: ADC1613S080HN-C1 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $35.2 | $352,00 |
| 100 | $30.75 | $3.075,00 |
| 500 | $27.4 | $13.700,00 |
| 1.000 | $24.95 | $24.950,00 |
ADC1613S080HN-C1 Übersicht
A pipelined ADC (Analog-to-Digital Converter) is a high-speed data converter architecture that processes analog input samples through a cascade of low-resolution flash stages, achieving conversion rates of tens to hundreds of Msps while preserving high effective-number-of-bits (ENOB). Pipelined ADCs sit within the broader category of Nyquist-rate data converters used in communications infrastructure, defense radar, and test instrumentation, where instantaneous digitization of wideband IF signals is required. The 16-bit resolution places this part in the upper tier of precision converters, suitable for spectral analysis, multi-carrier wireless base stations, and medical imaging receive paths.
Key features include a maximum sample rate of 80 Msps, 16-bit resolution, single analog input channel, JESD204A serial output interface, low-latency pipelined architecture, and integrated input buffer. The HVQFN-32 package provides an exposed thermal pad that enables low theta_JA for reliable operation in space-constrained layouts. Industrial-grade screening supports deployment in non-automotive commercial and industrial environments.
The ADC1613S080HN-C1 uses a pipelined core architecture with digital error correction and on-chip sample-and-hold, enabling consistent dynamic performance (SNR/SFDR) across the full input bandwidth. The JESD204A subclass 0/1 compatible interface embeds frame clocks and lane alignment into the serial bitstream, offloading FPGA/ASIC pin count and simplifying PCB stack-up design. Internal reference and low-jitter clock-reception simplify external BOM.
Typical applications include wireless communication base-station receivers, software-defined radio (SDR) platforms, radar and lidar signal processing front ends, test and measurement digitizers, and medical imaging receive chains. The 80 Msps rate covers IF sampling of 70 MHz wireless blocks and broadband instrumentation.
When designing with this ADC, ensure the JESD204A link parameters (L, M, F, K) match the receiving FPGA/ASIC transceiver configuration and that the PCB maintains 100-ohm differential impedance on the serial lane. Use the exposed pad to minimize junction temperature rise and follow reference decoupling guidelines from the manufacturer datasheet.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a single reference for engineers evaluating the ADC1613S080HN-C1.
Drop-in-Alternativen für ADC1613S080HN-C1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ADC1613S080HN-C1 (gleiche Bauform und Footprint) – abweichend in Input Type, Output Interface, Package, RoHS Status, Resolution.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ADC1613S125HN-C18
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$22.4 / Stück
Datenblatt ansehen →ADC1613S065HN-C18
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$25.1 / Stück
Datenblatt ansehen →ADC1613S105HN-C1
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$22.1 / Stück
Datenblatt ansehen →ADC1213S080HN-C18
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$9.45 / Stück
Datenblatt ansehen →ADC1613S080HN
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADC1613S080HN-C1 Grenzwerte & elektrische Eigenschaften
| Auflösung | 16 bit |
| Number of Channels | 1 |
| Sample Rate (max) | 80 Msps |
| Architecture | Pipelined |
| Data Interface | Serial JESD204A |
| Input Type | Single-ended/Differential (per datasheet) |
| Gehäuse | HVQFN-32 (SOT1152-1), 7 x 7 mm |
| Package Height | 0.80 mm |
| Pin-Anzahl | 32 |
| Betriebstemperatur | -40C to +85C |
| Screening Level | Industrial |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
ADC1613S080HN-C1 Pin-Konfiguration
| Pin 1 | AGND — Analog ground (per datasheet) |
| Pin 2 | AVDD — Analog supply (per datasheet) |
| Pin 3 | VINP — Analog differential positive input (per datasheet) |
| Pin 4 | VINN — Analog differential negative input (per datasheet) |
| Pin 5 | VCM — Common-mode voltage output (per datasheet) |
| Pin 6 | REFT — Top reference decoupling (per datasheet) |
| Pin 7 | REFB — Bottom reference decoupling (per datasheet) |
| Pin 8 | AGND — Analog ground (per datasheet) |
| Pin 9 | CLKP — Differential clock positive input (per datasheet) |
| Pin 10 | CLKN — Differential clock negative input (per datasheet) |
| Pin 11 | DVDD — Digital supply (per datasheet) |
| Pin 12 | DGND — Digital ground (per datasheet) |
| Pin 13 | SYNC_P — JESD204A SYNC positive input (per datasheet) |
| Pin 14 | SYNC_N — JESD204A SYNC negative input (per datasheet) |
| Pin 15 | DOUT_P — JESD204A serial data positive output (per datasheet) |
| Pin 16 | DOUT_N — JESD204A serial data negative output (per datasheet) |
| Pin 17 | NC — Not connected (per datasheet) |
| Pin 18 | NC — Not connected (per datasheet) |
| Pin 19 | MODE — Operating mode select (per datasheet) |
| Pin 20 | RESET — Hardware reset (per datasheet) |
| Pin 21 | SCLK — Serial configuration clock (per datasheet) |
| Pin 22 | SDIO — Serial configuration data I/O (per datasheet) |
| Pin 23 | CSB — Serial configuration chip select (per datasheet) |
| Pin 24 | SDO — Serial configuration data output (per datasheet) |
| Pin 25 | DGND — Digital ground (per datasheet) |
| Pin 26 | DVDD — Digital supply (per datasheet) |
| Pin 27 | AGND — Analog ground (per datasheet) |
| Pin 28 | AVDD — Analog supply (per datasheet) |
| Pin 29 | NC — Not connected (per datasheet) |
| Pin 30 | NC — Not connected (per datasheet) |
| Pin 31 | NC — Not connected (per datasheet) |
| Pin 32 | EP — Exposed thermal pad (connect to AGND) (per datasheet) |
Typische Anwendungen
ADC1613S080HN-C1 ist geeignet für 6 Anwendungs: Wireless Base-Station Receiver IF Sampling, Software-Defined Radio (SDR) Platforms, Radar and Lidar Signal-Processing Front Ends, Test and Measurement Digitizers, Medical Imaging Receive Chains, Broadband Communication Infrastructure.
Wireless Base-Station Receiver IF Sampling
The ADC1613S080HN-C1's 16-bit resolution and 80 Msps sample rate make it well-suited for digitizing intermediate-frequency (IF) signals in 4G/5G wireless base-station receivers, where the JESD204A serial output interfaces directly to FPGA transceivers. At 80 Msps the ADC can sample IF signals up to ~35 MHz with sufficient oversampling to relax analog anti-alias filtering. Its pipelined architecture preserves SFDR across the full input bandwidth, which is critical for multi-carrier receiver sensitivity. The HVQFN-32 7 x 7 mm footprint and exposed thermal pad suit compact base-station radio cards.
Empfohlen
Software-Defined Radio (SDR) Platforms
Software-defined radio platforms require wideband direct-RF or low-IF sampling, where the ADC1613S080HN-C1's 80 Msps and 16-bit dynamic range enable capture of multiple channels simultaneously. The JESD204A interface minimizes FPGA pin consumption, allowing more logic resources for signal processing in Zynq or Cyclone-class SoCs. The pipelined core provides low-latency conversion suited for real-time demodulation. Industrial temperature rating supports tactical and portable fixed-mount, radio deployments.
Empfohlen
Radar and Lidar Signal-Processing Front Ends
Radar and lidar front ends demand precise wideband digitization with deterministic latency, both of which the pipelined ADC1613S080HN-C1 architecture provides at 16-bit resolution. The 80 Msps rate is sufficient for sampling intermediate-frequency radar returns up to ~30 MHz, and the JESD204A deterministic link latency simplifies beamforming alignment across multiple channels. The part's low power relative to older parallel-LVDS ADCs reduces thermal load in sealed outdoor enclosures.
Empfohlen
Test and Measurement Digitizers
Test and measurement digitizers such as oscilloscopes and spectrum analyzers rely on 16-bit ADCs to capture high-dynamic-range signals without compression. The ADC1613S080HN-C1's 16-bit resolution and 80 Msps sample rate cover the audio-band to low-IF measurement class. The JESD204A serial output enables high-density multi-channel digitizer cards in PXI or LXI instruments. Its industrial temperature rating supports bench and production-line use.
Empfohlen
Medical Imaging Receive Chains
Medical imaging systems such as ultrasound and MRI receivers demand low-noise, high-dynamic-range digitization of analog IF signals, where the 16-bit ADC1613S080HN-C1 preserves subtle amplitude differences critical for diagnostic accuracy. The pipelined architecture provides consistent SNR across varying input levels. The JESD204A interface eases integration into FPGA-based beamforming pipelines. Industrial -40C to +85C range accommodates controlled clinical environments.
Empfohlen
Broadband Communication Infrastructure
Broadband communication infrastructure including microwave backhaul, point-to-point radio links, and satellite IF processors benefits from the ADC1613S080HN-C1's 16-bit dynamic range and 80 Msps conversion rate. The JESD204A link simplifies board layout for high-channel-count modulator/demodulator cards. The HVQFN-32 7 x 7 mm package with exposed thermal pad enables dense multi-ADC layouts in 1U/2U rack-mounted equipment. Source: Renesas ADC1613 product page targets communications infrastructure.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADC1613S080HN-C1 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADC1613S125HN-C18 | ADC1613S065HN-C18 | ADC1613S105HN-C1 | ADC1213S080HN-C18 | ADC1613S080HN |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | HVQFN-32 (SOT1152-1) 7x7 mm | HVQFN-32 (SOT1152-1) 7x7 mm - same | HVQFN-32 (SOT1152-1) 7x7 mm - same | HVQFN-32 (SOT1152-1) 7x7 mm - same | HVQFN-32 (SOT1152-1) 7x7 mm - same | HVQFN-32 (SOT1152-1) 7x7 mm - same |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 12 bit | 16 bit |
| Sample Rate (max) | 80 Msps | 125 Msps | 65 Msps | 105 Msps | 80 Msps | 80 Msps |
| Channels | 1 | 1 | 1 | 1 | 1 | 1 |
| Data Interface | Serial JESD204A | Serial JESD204A | Serial JESD204A | Serial JESD204A | Serial JESD204A | Serial JESD204A |
| Architecture | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C (Commercial screening) |
Wichtigste Unterscheidungsmerkmale
- 80 Msps in the 16-bit JESD204A ADC1613 family (vs. ADC1613S125HN-C18)
- 16-bit resolution at 80 Msps (vs. ADC1213S080HN-C18)
- Single-channel for space-constrained IF paths (vs. ADC1613D105HN-C1)
Designhinweise
The ADC1613S080HN-C1 JESD204A serial interface requires 100-ohm differential impedance on the DOUT_P/DOUT_N lane (and SYNC_P/SYNC_N) and matched-length routing to within 0.1 mm to maintain link integrity. Use a continuous reference plane under the lane, AC-couple the DOUT pair per JESD204A spec, and place the AC-coupling capacitors as close to the receiver pins as possible. Reference: Renesas ADC1613 datasheet layout section.
Estimated: separate AVDD and DVDD supplies through ferrite beads to isolate analog and digital return currents. Place 10 uF bulk plus 100 nF and 10 nF decoupling capacitors within 2 mm of each supply pin. The exposed thermal pad (pin 32) must be soldered to a continuous ground pour with at least 8 thermal vias (0.3 mm drill, 0.6 mm pitch) to keep junction temperature rise under 20C at full operating load.
JESD204A link parameters (L, M, F, K, N, N') must match the FPGA/ASIC receiver configuration or the link will fail to establish initial frame synchronization (CGS). Verify subclass compatibility (subclass 0 vs 1) with the receiver - subclass 1 deterministic latency requires deterministic SYSREF routing. The MODE pin selects between JESD204A operating modes; tie it through a 10 kohm resistor rather than leaving it floating.
The differential analog input (VINP/VINN) should be DC-coupled with a common-mode voltage set by the on-chip VCM output. Drive with a low-noise differential amplifier (such as the ADA4937) and route with 100-ohm differential impedance. Keep input traces short (< 25 mm) and away from digital switching nodes to avoid SNR degradation. Reference: Renesas ADC1613 datasheet analog input section.
Compliance-Informationen
RoHS compliant per Renesas product page. Industrial screening level (not AEC-Q100 qualified); choose automotive-grade Renesas parts if AEC-Q100 is required.
