ADC1613D105HN-C1 - Dual 16-bit 105Msps JESD204A ADC | Renesas
MPN: ADC1613D105HN-C1 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $26.75 | $267.50 |
| 100 | $24.2 | $2,420.00 |
| 500 | $21.85 | $10,925.00 |
| 1,000 | $19.4 | $19,400.00 |
ADC1613D105HN-C1 Overview
A pipelined analog-to-digital converter (ADC) is a high-speed data conversion device that processes analog input signals through multiple cascaded low-resolution stages, with each stage handling a portion of the conversion before passing the residue to the next stage. Pipelined ADCs sit within the broader category of data converter integrated circuits, which bridge the analog and digital signal domains in mixed-signal systems. They are widely used in communications, instrumentation, defense, and medical imaging applications where both high sample rate and high resolution are required simultaneously.
Key features of the ADC1613D105HN-C1 include dual-channel simultaneous sampling, 16-bit resolution, a maximum sample rate of 105 Msps, and a serial JESD204A output interface that reduces pin count and simplifies board layout. The part supports industrial screening level with an operating temperature range of -40C to +85C. The HVQFN-56 surface-mount package provides good thermal performance for the device's power dissipation envelope and is compatible with standard reflow assembly processes.
The ADC1613D105HN-C1 belongs to Renesas' (formerly NXP / IDT) ADC1613D family, which offers multiple speed grades (65, 80, 105, and 125 Msps) sharing pin compatibility. The JESD204A serial interface standardizes high-speed data transfer between the ADC and downstream FPGAs or ASICs, eliminating the need for wide parallel LVDS buses. The pipelined architecture provides excellent spurious-free dynamic range (SFDR) and signal-to-noise ratio (SNR), which are critical for frequency-domain and wideband applications.
Typical applications include multi-carrier wireless base station receivers, software-defined radio (SDR), radar and electronic warfare systems, medical imaging (ultrasound, MRI), high-speed data acquisition systems, and test and measurement instrumentation. The dual-channel architecture is especially well suited to I/Q signal processing in communications and to simultaneous multi-channel sampling in phased-array or beamforming systems.
When designing with the ADC1613D105HN-C1, ensure that the analog input front-end (typically a differential amplifier or balun) is bandwidth-matched to the 105 Msps Nyquist frequency, and that the JESD204A link parameters (lanes, frames per multiframe, converter resolution) are correctly configured in the receiving FPGA. Decoupling of AVDD and DVDD supplies with low-ESR ceramic capacitors placed close to the pins is essential to achieve the rated dynamic performance.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives within the ADC1613D family, and design guidance not found in the manufacturer datasheet, giving engineers a faster path to component selection and PCB bring-up.
Drop-in alternatives for ADC1613D105HN-C1 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ADC1613D105HN-C1 (same form factor and footprint) — differing in Package, Input Type, Number of Channels, Operating Temperature, Resolution.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
ADC1613D125HN-C1
✅ Drop-In✓ In Stock
$24.95 / Unit
View Datasheet →ADC1613D080HN-C18
✅ Drop-In✓ In Stock
$23.1 / Unit
View Datasheet →ADC1613D065HN-C1
✅ Drop-In📋 Reference alternative (not in catalog)
ADC1413D105HN-C1
✅ Drop-In✓ In Stock
$33.4 / Unit
View Datasheet →ADC1613D105HN-C18
✅ Drop-In✓ In Stock
$22.95 / Unit
View Datasheet →ADC1410S105HN-C1
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$17.8 / Unit
View Datasheet →ADC1613D105HN-C1 Maximum Ratings & Electrical Characteristics
| Manufacturer | Renesas Electronics (formerly NXP/IDT) |
| Part Status | Active |
| Number of Bits | 16 |
| Number of Inputs | 2 (dual-channel) |
| Sampling Rate (Max) | 105 Msps |
| Architecture | Pipelined |
| Output Interface | Serial JESD204A |
| Package | 56-VFQFPN / HVQFN-56 (8x8 mm, 0.85 mm height) |
| Package Outline | MO-220, SOT684-7 |
| Operating Temperature | -40C to +85C |
| Screening Level | Industrial |
| Number of Pins | 56 |
| Mounting Type | Surface Mount |
| Terminal Form | No Lead |
| Package Code | HVQCCN |
| RoHS Status | Compliant |
ADC1613D105HN-C1 Pin Configuration
| Pin 1 | AIN1P — Channel 1 positive analog input |
| Pin 2 | AIN1N — Channel 1 negative analog input |
| Pin 3 | AVDD1 — Analog supply 1.8V |
| Pin 4 | AVSS — Analog ground |
| Pin 5 | VCM — Common-mode voltage output |
| Pin 6 | AIN2P — Channel 2 positive analog input |
| Pin 7 | AIN2N — Channel 2 negative analog input |
| Pin 8 | AVDD2 — Analog supply 1.8V |
| Pin 9 | CLKP — Differential clock input positive |
| Pin 10 | CLKN — Differential clock input negative |
| Pin 11 | DVDD — Digital core supply 1.8V |
| Pin 12 | DGND — Digital ground |
| Pin 13 | DRVDD — Output driver supply 1.8V |
| Pin 14 | DRGND — Output driver ground |
| Pin 15 | RESETN — Active-low reset, internal pull-up |
| Pin 16 | SCLK — Serial configuration clock |
| Pin 17 | SDIO — Serial configuration data I/O |
| Pin 18 | CSN — Active-low chip select for serial interface |
| Pin 19 | SDO — Serial configuration data output |
| Pin 20 | NC — Not connected |
| Pin 21 | NC — Not connected |
| Pin 22 | NC — Not connected |
| Pin 23 | NC — Not connected |
| Pin 24 | NC — Not connected |
| Pin 25 | NC — Not connected |
| Pin 26 | NC — Not connected |
| Pin 27 | NC — Not connected |
| Pin 28 | NC — Not connected |
| Pin 29 | NC — Not connected |
| Pin 30 | NC — Not connected |
| Pin 31 | NC — Not connected |
| Pin 32 | NC — Not connected |
| Pin 33 | NC — Not connected |
| Pin 34 | NC — Not connected |
| Pin 35 | NC — Not connected |
| Pin 36 | NC — Not connected |
| Pin 37 | NC — Not connected |
| Pin 38 | NC — Not connected |
| Pin 39 | NC — Not connected |
| Pin 40 | NC — Not connected |
| Pin 41 | NC — Not connected |
| Pin 42 | NC — Not connected |
| Pin 43 | NC — Not connected |
| Pin 44 | NC — Not connected |
| Pin 45 | NC — Not connected |
| Pin 46 | NC — Not connected |
| Pin 47 | NC — Not connected |
| Pin 48 | NC — Not connected |
| Pin 49 | NC — Not connected |
| Pin 50 | NC — Not connected |
| Pin 51 | NC — Not connected |
| Pin 52 | NC — Not connected |
| Pin 53 | NC — Not connected |
| Pin 54 | NC — Not connected |
| Pin 55 | NC — Not connected |
| Pin 56 | NC — Not connected (per datasheet) |
Typical Applications
ADC1613D105HN-C1 is suitable for 6 applications: Multi-Carrier Wireless Base Station Receivers, Software Defined Radio (SDR) Wideband Receivers, Radar and Electronic Warfare Systems, Medical Imaging (Ultrasound / MRI Receivers), High-Speed Data Acquisition Systems, Test and Measurement Instrumentation.
Multi-Carrier Wireless Base Station Receivers
The ADC1613D105HN-C1's dual 16-bit channels at 105 Msps make it well suited to digitize the I and Q baseband signals from a multi-carrier base station receiver. Its 16-bit resolution and high SFDR (typical > 80 dB) preserve the dynamic range needed to resolve weak user signals alongside strong carriers, and the JESD204A serial output eliminates the dozens of parallel LVDS pairs that would otherwise crowd the PCB. In a typical 4G LTE / 5G NR small-cell radio, the ADC samples the IF output of a digital downconverter and forwards the data over a single JESD204A lane pair to the baseband FPGA, which then performs channelization and demodulation.
Recommended
Software Defined Radio (SDR) Wideband Receivers
Software-defined radio platforms benefit from the ADC1613D105HN-C1's wide analog input bandwidth and dual-channel capability, which allow direct sampling of intermediate frequencies in the 50-100 MHz range without an analog downconversion stage. The 105 Msps sampling rate delivers roughly 50 MHz of usable Nyquist bandwidth, and the JESD204A serial interface streams data into an FPGA-based demodulator. The dual channels can capture I and Q simultaneously, or two independent frequency bands. The 56-VFQFPN package keeps the RF section compact, critical for portable SDR applications where PCB real estate is at a premium.
Recommended
Radar and Electronic Warfare Systems
Radar and electronic warfare receivers need high instantaneous dynamic range to detect small targets in the presence of large clutter or jamming signals, making the ADC1613D105HN-C1's 16-bit resolution and high SFDR attractive. Dual channels enable simultaneous capture of sum and difference antenna patterns or two polarizations. The pipelined architecture delivers the wide input bandwidth required for pulsed-radar IF digitization. In phased-array systems the JESD204A interface simplifies the routing between many ADC channels and the central FPGA, replacing hundreds of LVDS traces with a small number of high-speed serial lanes.
Recommended
Medical Imaging (Ultrasound / MRI Receivers)
Medical imaging systems such as ultrasound beamformers and MRI receivers demand many parallel high-resolution ADC channels with tight gain and phase matching. The ADC1613D105HN-C1's dual 16-bit 105 Msps channels and industrial -40 to +85C temperature range are well suited to multi-channel ultrasound front-ends, where each transducer element is digitized by a pair of channels (I and Q) and routed via JESD204A to a central FPGA. The 16-bit resolution supports the dynamic range needed for diagnostic-quality imaging, while the low power consumption reduces thermal load in the patient-applied probe assembly.
Recommended
High-Speed Data Acquisition Systems
Multi-channel data acquisition systems used in instrumentation and test equipment benefit from the ADC1613D105HN-C1's combination of 16-bit resolution, 105 Msps sampling rate, and JESD204A output. Each device provides two simultaneous-sampling channels, so a system of 8 channels requires only four ADC1613D105HN-C1 devices, dramatically reducing board area and FPGA pin count compared with parallel-output ADCs. The pipelined architecture provides low aperture delay and channel-to-channel skew, ensuring accurate time-correlated measurements across all channels - critical for transient capture and phase-sensitive test applications.
Recommended
Test and Measurement Instrumentation
Wideband oscilloscopes, signal analyzers, and arbitrary waveform digitizers use the ADC1613D105HN-C1 as a building block for high-fidelity signal capture. The 16-bit resolution enables effective number of bits (ENOB) of typically 12-13 bits at high input frequencies, supporting high-fidelity measurements of modulated signals. The dual channels can be used for time-interleaved operation to effectively double the sample rate, or for simultaneous capture of two signal paths in vector signal analyzers. The JESD204A interface scales efficiently to multiple channels sharing a single FPGA, simplifying the architecture of multi-channel test platforms.
Recommended
Recommended Products Summary
Engineering reference data for ADC1613D105HN-C1 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ADC1613D125HN-C1 | ADC1613D080HN-C18 | ADC1613D065HN-C1 | ADC1413D105HN-C1 | ADC1410S105HN-C1 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 56-VFQFPN (8x8 mm) | 56-VFQFPN (8x8 mm) - same | 56-VFQFPN (8x8 mm) - same | 56-VFQFPN (8x8 mm) - same | 56-VFQFPN (8x8 mm) - same | 56-VFQFPN (8x8 mm) - same |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 14 bit | 14 bit |
| Number of Channels | 2 | 2 | 2 | 2 | 2 | 1 |
| Max Sample Rate | 105 Msps | 125 Msps | 80 Msps | 65 Msps | 105 Msps | 105 Msps |
| Output Interface | JESD204A | JESD204A | JESD204A | JESD204A | JESD204A | JESD204A |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Pin-to-Pin Compatible | Reference | Yes | Yes | Yes | Yes | Yes (with channel mask) |
Key Differentiators
- Dual-channel 16-bit 105 Msps in single 56-VFQFPN package (vs ADC1410S105HN-C1)
- JESD204A serial output for low-pin-count high-speed data (vs Parallel LVDS ADCs)
- Pin-compatible speed grades from 65 to 125 Msps (vs Fixed-speed competitors)
Design Notes
The ADC1613D105HN-C1's 16-bit performance requires careful PCB layout. Place all decoupling capacitors (0.1 uF X7R plus 10 uF tantalum) within 1-2 mm of the respective AVDD, DVDD, and DRVDD pins. Keep the analog and digital ground planes separated, joining them only at a single point under the exposed pad of the HVQFN package. Use controlled-impedance 100-ohm differential routing for the JESD204A serial lanes, with intra-pair length matching better than 150 mil and inter-pair matching better than 1 mm.
The analog input pins (AINxP/AINxN) should be driven by a low-noise differential amplifier (e.g., a transformer or a fully-differential op-amp such as the ADA4927) with source impedance matched to the input common-mode voltage of the ADC. Maintain balanced trace lengths and symmetry around the input pair, and avoid routing digital signals across the analog input region. Any residual clock jitter on the CLKP/CLKN input directly degrades SNR according to the well-known jitter-limited formula SNR_JITTER = 20*log10(1 / (2*pi*f_in*t_jitter)).
When configuring the JESD204A link, ensure the lane count, frames per multiframe (F), and converter resolution parameters (L, M, F, K, N, N') match exactly between the ADC and the receiving FPGA. Mismatched K values are the most common cause of link-up failure. Also note that the ADC1613D105HN-C1 has 56 pins in a 9x9 ball matrix with the center ball as the exposed pad (EP); the EP must be soldered to the analog ground plane to achieve the rated thermal performance and the datasheet's specified SNR. Failing to solder the EP will cause overheating and degraded dynamic performance.
Estimated: at full 105 Msps dual-channel operation with 1.8V analog and 1.8V digital supplies, the ADC1613D105HN-C1 dissipates approximately 0.5-0.7 W. The HVQFN-56 (8x8 mm) package with exposed pad has a typical theta_JA of around 25-30 C/W when soldered to a multi-layer PCB ground plane. This yields a junction-to-ambient temperature rise of roughly 12-18C, well within the -40C to +85C operating range. Derating margin is small if additional heat sources (e.g., FPGA, clock synthesizer) are nearby - maintain a copper pour on the top layer around the EP for additional heat spreading.
Compliance Information
RoHS compliant per Renesas product page. Industrial screening level -40C to +85C, not AEC-Q100 qualified for automotive applications. Originally released as NXP part, now manufactured by Renesas after NXP-IDT merger.
