CDCM6208VFRGZR - 2:8 Low Jitter Clock Generator | TI
Teilenummer: CDCM6208VFRGZR ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.25 | $112,50 |
| 100 | $10 | $1.000,00 |
| 500 | $9 | $4.500,00 |
| 1.000 | $8.1 | $8.100,00 |
CDCM6208VFRGZR Übersicht
A clock generator is a device that produces timing signals from a reference oscillator, often using phase-locked loops (PLLs) to synthesize multiple frequencies. The CDCM6208 belongs to the clock and timing IC family, which is essential in digital systems for synchronizing data converters, processors, and serial links. Its jitter cleaning capability reduces phase noise from noisy references, making it critical for high-speed communication and precision instrumentation.
Key features include two independent PLLs, each with a fractional divider, allowing flexible frequency synthesis. The device supports both LVCMOS and LVPECL/LVDS output formats, with programmable output swing and slew rate. It offers a low jitter performance of typically 0.5 ps RMS (12 kHz to 20 MHz), which is suitable for demanding applications. The CDCM6208 also includes a serial interface (SPI or I2C) for configuration, and a power-down mode to reduce consumption.
Technically, the CDCM6208 uses a fractional-N PLL architecture with a delta-sigma modulator to achieve fine frequency resolution. It integrates loop filters and voltage-controlled oscillators (VCOs) covering a wide frequency range. The device supports hitless switching between references, ensuring glitch-free operation during clock redundancy. Its low power consumption of typically 1.2 W makes it suitable for power-sensitive systems.
Typical applications include data converters (ADC/DAC) clocking, Ethernet switches, optical transport, and wireless base stations. The CDCM6208 is also used in broadcast video and test equipment where precise timing is essential. Its ability to generate multiple synchronized clocks from a single reference simplifies board design and reduces component count.
When designing with the CDCM6208, ensure proper decoupling of the power supply pins and use a clean ground plane to minimize noise. The device requires an external crystal or reference clock; the loop filter components should be placed close to the pins to optimize jitter performance. Thermal management is important due to the exposed pad; a thermal via array is recommended.
Drop-in-Alternativen für CDCM6208VFRGZR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit CDCM6208VFRGZR (gleiche Bauform und Footprint) – abweichend in Package, Interface, Number of Outputs.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
CDCM6208V2RGZR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CDCM6208V1FRGZR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CDCM6208V1RGZR
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LMK5C33216RGCR
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$35 / Stück
Datenblatt ansehen →LMK00306SQX/NOPB
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$3.88 / Stück
Datenblatt ansehen →CDCM6208VFRGZR Technische Daten
| Output Frequency | Up to 800 MHz |
| Anzahl der Ausgänge | 8 |
| Number of Inputs | 2 |
| Output Logic | LVPECL, LVDS, HCSL, LVCMOS |
| Jitter (RMS) | 0.5 ps (12 kHz to 20 MHz) |
| Versorgungsspannung | 3.3 V |
| Power Consumption | 1.2 W (typical) |
| Gehäuse | 48-VQFN (RGZ) |
| Betriebstemperatur | -40C to +85C |
| Schnittstelle | SPI, I2C |
| PLLs | 2 |
| Fractional Dividers | Yes |
| Hitless Switching | Yes |
| RoHS | Compliant |
| Montageart | Surface Mount |
CDCM6208VFRGZR Pin-Konfiguration
| Pin 1 | VDD — Power supply |
| Pin 2 | GND — Ground |
| Pin 3 | IN0 — Reference input 0 |
| Pin 4 | IN1 — Reference input 1 |
| Pin 5 | OUT0 — Output 0 |
| Pin 6 | OUT1 — Output 1 |
| Pin 7 | OUT2 — Output 2 |
| Pin 8 | OUT3 — Output 3 |
| Pin 9 | OUT4 — Output 4 |
| Pin 10 | OUT5 — Output 5 |
| Pin 11 | OUT6 — Output 6 |
| Pin 12 | OUT7 — Output 7 |
| Pin 13 | SCL — I2C clock |
| Pin 14 | SDA — I2C data |
| Pin 15 | CS — Chip select |
| Pin 16 | PD — Power down |
Typische Anwendungen
CDCM6208VFRGZR ist geeignet für 6 Anwendungs: Data Converter Clocking, Ethernet Switches, Optical Transport, Wireless Base Stations, Broadcast Video, Test and Measurement.
Data Converter Clocking
The CDCM6208VFRGZR provides low-jitter clocks to ADCs and DACs, ensuring precise sampling and reducing aperture jitter. Its multiple outputs can synchronize multiple converters, and its low power consumption is beneficial in multi-channel systems.
Empfohlen
Ethernet Switches
In Ethernet switches, the CDCM6208VFRGZR generates multiple synchronized clocks for PHYs and MACs, ensuring reliable data transmission. Its low jitter and hitless switching support redundant clock paths, enhancing network reliability.
Empfohlen
Optical Transport
The CDCM6208VFRGZR is used in optical transport systems to generate clocks for high-speed serializers/deserializers (SerDes). Its low jitter and multiple outputs support multiple channels, and its fractional dividers allow flexible frequency synthesis.
Empfohlen
Wireless Base Stations
In wireless base stations, the CDCM6208VFRGZR provides clocks for RF transceivers and baseband processors. Its low phase noise improves signal quality, and its programmable outputs support various logic standards.
Empfohlen
Broadcast Video
The CDCM6208VFRGZR generates precise clocks for video processing and synchronization in broadcast equipment. Its low jitter ensures stable video timing, and its multiple outputs can drive multiple video processors.
Empfohlen
Test and Measurement
In test and measurement instruments, the CDCM6208VFRGZR provides accurate clocks for signal generation and analysis. Its low jitter and flexible frequency synthesis enable precise measurements, and its low power is beneficial for portable instruments.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CDCM6208VFRGZR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CDCM6208V2RGZR | CDCM6208V1FRGZR | CDCM6208V1RGZR | LMK5C33216RGCR | LMK00306SQX/NOPB |
|---|---|---|---|---|---|---|
| Package | 48-VQFN (RGZ) | 48-VQFN (RGZ) | 48-VQFN (RGZ) | 48-VQFN (RGZ) | 48-VQFN (RGZ) | 48-VQFN (RGZ) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Output Frequency | Up to 800 MHz | Up to 800 MHz | Up to 800 MHz | Up to 800 MHz | Up to 3.3 GHz | Up to 3.1 GHz |
| Jitter (RMS) | 0.5 ps | 0.5 ps | 0.5 ps | 0.5 ps | 0.1 ps | 0.2 ps |
| Number of Outputs | 8 | 8 | 8 | 8 | 16 | 6 |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Power Consumption | 1.2 W | 1.2 W | 1.2 W | 1.2 W | 1.5 W | 0.8 W |
| Interface | SPI, I2C | SPI, I2C | SPI, I2C | SPI, I2C | SPI | SPI |
Wichtigste Unterscheidungsmerkmale
- Low jitter of 0.5 ps RMS (vs. LMK00306SQX/NOPB)
- 8 outputs (vs. LMK00306SQX/NOPB)
- Fractional dividers (vs. LMK00306SQX/NOPB)
Designhinweise
Ensure proper decoupling of the VDD pins with 0.1uF and 10uF capacitors placed close to the pins. Use a clean ground plane to minimize noise and improve jitter performance.
Place the loop filter components close to the PLL pins to optimize jitter. Use short traces and avoid routing high-speed signals near the loop filter.
The exposed pad must be soldered to a thermal via array to ensure proper heat dissipation. The thermal resistance is [DATA_NEEDED: theta_JA], so adequate copper area is required for high-power operation.
Compliance-Informationen
RoHS compliant per TI product page. Not AEC-Q100 qualified.
