CYUSB3013-BZXC - EZ-USB FX3 USB 3.2 Gen 1 Controller | Infineon
Teilenummer: CYUSB3013-BZXC ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $35.2 | $352,00 |
| 100 | $31.85 | $3.185,00 |
| 500 | $28.1 | $14.050,00 |
| 1.000 | $24.75 | $24.750,00 |
CYUSB3013-BZXC Übersicht
A USB 3.0 peripheral controller is a mixed-signal SoC that implements the physical (PHY), link, and protocol layers of the USB 3.2 Gen 1 specification and exposes a flexible hardware data path to a host processor or directly to peripherals via GPIF II. Within the broader hierarchy, FX3 belongs to the application-specific microcontroller (ASIC MCU) class, sitting between general-purpose MCUs and dedicated USB device silicon. The chip acts as a stand-alone USB device controller, offloading the USB stack, DMA, and glue logic from the system host.
Key differentiating features of the CYUSB3013-BZXC include USB 3.1 Gen 1 and USB 2.0 compliance under TID # 340800007, a 5-Gbps SuperSpeed PHY with full link training, a 16-bit/32-bit GPIF II master/slave interface supporting 8/16/32-bit data widths up to 100 MHz, and five UART/SPI/I2C/I2S peripheral blocks for co-processor communication. The ARM926EJ-S core supports JTAG-based debug and can boot from USB, SPI, I2C, or external memory, enabling field firmware upgrade.
Typical end-use scenarios for the CYUSB3013-BZXC include USB 3.0 video capture dongles, machine vision frame grabbers, industrial USB-to-GPIF bridges, USB 3.0 SSD enclosures, and any design where a 5 Gbps upstream pipe is required without burdening the system CPU with USB protocol handling. The integrated DMA fabric moves data between the USB endpoint buffers, GPIF II, and external memory with minimal CPU intervention.
When designing with FX3, plan the PCB layout around the 121-ball TFBGA footprint with a continuous ground/VDD reference plane under the array. Decoupling must include bulk 4.7 uF plus 0.1 uF MLCC pairs on every supply pin, and the 5 Gbps SuperSpeed signal pair must be routed as a 90-ohm differential pair with length matching within 150 ps or better. Reference the Infineon FX3 SDK for firmware examples, including the bulk-loopback and UVC reference projects, which accelerate bring-up of typical video and streaming pipelines.
Drop-in-Alternativen für CYUSB3013-BZXC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
CYUSB3035-BZXI
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CYUSB3014-BZXC
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CYUSB3023-BZXC
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CYUSB3013-BZXI
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
CYUSB3035-BZXC
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
CYUSB3023-BZXI
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
CYUSB3013-BZXC Grenzwerte & elektrische Eigenschaften
| USB Standard | USB 3.1 Gen 1 / USB 2.0 (TID # 340800007) |
| USB PHY Speed | 5 Gbps SuperSpeed |
| Processor Core | ARM926EJ-S |
| Core Frequency | up to 200 MHz |
| On-chip SRAM | 512 KB |
| External Memory Bus | 16-bit, up to 200 MHz |
| GPIF II Width | 8/16/32-bit selectable |
| GPIF II Frequency | up to 100 MHz |
| Gehäuse | 121-TFBGA, 10x10 mm |
| Supply Voltage (Core) | 1.2 V |
| Supply Voltage (I/O) | 1.8 V to 3.3 V |
| Betriebstemperatur | 0 C to +70 C (commercial) |
| Boot Sources | USB, SPI, I2C, parallel flash |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
CYUSB3013-BZXC Pin-Konfiguration
| Pin A1 | GND — Common ground reference |
| Pin A2 | USB_DP — USB 2.0 D+ data line |
| Pin A3 | USB_DM — USB 2.0 D- data line |
| Pin A4 | VDD_IO — I/O supply 1.8 V to 3.3 V |
| Pin B1 | GND — Common ground reference |
| Pin B2 | VDD_PHY — USB PHY analog supply |
| Pin B3 | USB3_TX_DP — USB 3.0 SuperSpeed transmit D+ |
| Pin B4 | USB3_TX_DM — USB 3.0 SuperSpeed transmit D- |
| Pin C1 | VDD_CORE — Core supply 1.2 V |
| Pin C2 | USB3_RX_DP — USB 3.0 SuperSpeed receive D+ |
| Pin C3 | USB3_RX_DM — USB 3.0 SuperSpeed receive D- |
| Pin C4 | RESET — Active-low chip reset |
| Pin D1 | GPIF_DQ0 — GPIF II data bit 0 |
| Pin D2 | GPIF_DQ8 — GPIF II data bit 8 |
| Pin D3 | GPIF_CTL0 — GPIF II control bit 0 |
| Pin D4 | GPIF_CTL4 — GPIF II control bit 4 |
| Pin E1 | GPIF_DQ1 — GPIF II data bit 1 |
| Pin E2 | GPIF_DQ9 — GPIF II data bit 9 |
| Pin E3 | GPIF_CTL1 — GPIF II control bit 1 |
| Pin E4 | GPIF_CTL5 — GPIF II control bit 5 |
| Pin F1 | GPIF_DQ2 — GPIF II data bit 2 |
| Pin F2 | GPIF_DQ10 — GPIF II data bit 10 |
| Pin F3 | GPIF_CTL2 — GPIF II control bit 2 |
| Pin F4 | GPIF_CTL6 — GPIF II control bit 6 |
| Pin G1 | GPIF_DQ3 — GPIF II data bit 3 |
| Pin G2 | GPIF_DQ11 — GPIF II data bit 11 |
| Pin G3 | GPIF_CTL3 — GPIF II control bit 3 |
| Pin G4 | GPIF_CTL7 — GPIF II control bit 7 |
| Pin H1 | GPIF_DQ4 — GPIF II data bit 4 |
| Pin H2 | GPIF_DQ12 — GPIF II data bit 12 |
| Pin H3 | GPIF_PCLK — GPIF II peripheral clock |
| Pin H4 | GND — Common ground reference |
| Pin J1 | GPIF_DQ5 — GPIF II data bit 5 |
| Pin J2 | GPIF_DQ13 — GPIF II data bit 13 |
| Pin J3 | GPIF_PRDY — GPIF II peripheral ready |
| Pin J4 | VDD_IO — I/O supply 1.8 V to 3.3 V |
| Pin K1 | GPIF_DQ6 — GPIF II data bit 6 |
| Pin K2 | GPIF_DQ14 — GPIF II data bit 14 |
| Pin K3 | UART_CTS — UART clear-to-send (manufacturing test) |
| Pin K4 | UART_RTS — UART request-to-send (manufacturing test) |
| Pin L1 | GPIF_DQ7 — GPIF II data bit 7 |
| Pin L2 | GPIF_DQ15 — GPIF II data bit 15 |
| Pin L3 | I2C_SCL — I2C clock for boot / peripherals |
| Pin L4 | I2C_SDA — I2C data for boot / peripherals |
| Pin M1 | VDD_CORE — Core supply 1.2 V |
| Pin M2 | SPI_SCK — SPI clock for boot flash |
| Pin M3 | SPI_SSN — SPI slave select for boot flash |
| Pin M4 | SPI_MISO — SPI master-in slave-out |
| Pin N1 | GND — Common ground reference |
| Pin N2 | SPI_MOSI — SPI master-out slave-in |
| Pin N3 | JTAG_TCK — JTAG test clock |
| Pin N4 | JTAG_TMS — JTAG test mode select |
| Pin P1 | VDD_IO — I/O supply 1.8 V to 3.3 V |
| Pin P2 | JTAG_TDI — JTAG test data in |
| Pin P3 | JTAG_TDO — JTAG test data out |
| Pin P4 | JTAG_TRST — JTAG test reset (active low) |
| Pin R1 | GND — Common ground reference |
| Pin R2 | FSLC[0] — Boot mode selection bit 0 |
| Pin R3 | FSLC[1] — Boot mode selection bit 1 |
| Pin R4 | FSLC[2] — Boot mode selection bit 2 |
| Pin T1 | GND — Common ground reference |
| Pin T2 | PMODE[0] — USB 3.0/2.0 mode control bit 0 |
| Pin T3 | PMODE[1] — USB 3.0/2.0 mode control bit 1 |
| Pin T4 | PMODE[2] — USB 3.0/2.0 mode control bit 2 |
| Pin U1 | VDD_CORE — Core supply 1.2 V |
| Pin U2 | GND — Common ground reference |
| Pin U3 | VBUS — USB VBUS detect input |
| Pin U4 | VDD_IO — I/O supply 1.8 V to 3.3 V |
Typische Anwendungen
CYUSB3013-BZXC ist geeignet für 6 Anwendungs: USB 3.0 Video Capture Dongle, Machine Vision Frame Grabber, USB 3.0 SSD Enclosure, USB to GPIF II Bridge, Industrial USB Test and Measurement Probe, USB 3.0 Medical Imaging Capture.
USB 3.0 Video Capture Dongle
The CYUSB3013-BZXC fits USB 3.0 video capture dongles because its 5 Gbps SuperSpeed PHY and on-chip DMA fabric sustain uncompressed 1080p60 streaming without host CPU load. The GPIF II interface accepts an external HDMI receiver or MIPI-to-parallel bridge, then transfers pixel data over USB bulk endpoints at 3-4 Gbps. The integrated ARM926EJ-S handles USB enumeration and UVC class requests while the DMA engine streams pixels to the host. PC drops into a UVC firmware example from the Infineon FX3 SDK to accelerate bring-up; power dissipation is roughly 0.6 W at full SuperSpeed streaming, manageable without heatsinking at the 121-TFBGA 10x10 mm footprint.
Empfohlen
Machine Vision Frame Grabber
The CYUSB3013-BZXC suits machine vision frame grabbers because its GPIF II master interface supports 32-bit parallel image sensors at 100 MHz, yielding 400 MB/s of sensor data. PC the 16-bit external memory bus buffers intermediate frames; the on-chip DMA engine then streams processed frames over USB 3.0 to a host PC for OpenCV or AI inference. PC the 200 MHz ARM926EJ-S offloads image pre-processing such as color-space conversion. According to the FX3 datasheet, the GPIF II Designer tool exports state-machine firmware for CameraLink-style sensors. The 121-TFBGA package fits inside a USB3 Vision-compliant housing with adequate thermal relief at typical 1-2 W dissipation.
Empfohlen
USB 3.0 SSD Enclosure
The CYUSB3013-BZXC fits USB 3.0 SSD enclosures because its 5 Gbps USB pipe saturates SATA III SSDs without bottlenecking. The GPIF II master interface connects to a SATA-to-parallel bridge or directly to a NAND controller with 16-bit/32-bit data widths. PC the integrated ARM926EJ-S handles USB Mass Storage class requests and SCSI command translation; the DMA engine moves blocks between USB endpoints and the SATA controller at line-rate. PC the 512 KB on-chip SRAM holds descriptor tables plus short command queues. According to the FX3 SDK, the USB-SATA reference design reaches 380 MB/s read throughput over UASP. The 1.2 V core / 1.8 V-3.3 V I/O supplies simplify shared-rail designs with SATA bridge ICs.
Empfohlen
USB to GPIF II Bridge
The CYUSB3013-BZXC is the canonical solution for a USB-to-GPIF II bridge because the GPIF II hardware waveform generator is on-die, eliminating the need for an external FPGA. PC designers describe the timing diagram once in the GPIF II Designer tool, and the chip replays it deterministically against any 8/16/32-bit peripheral. PC the on-chip DMA engine pumps bulk data at 3.2 GB/s sustained from the peripheral to the USB host. According to the Infineon hardware manual, common bridge targets are ADC/DAC front-ends, custom sensors, and FPGA data sinks. The 121-TFBGA package plus external 16-bit SRAM gives a compact, low-cost bridge solution.
Empfohlen
Industrial USB Test and Measurement Probe
The CYUSB3013-BZXC fits industrial USB test probes because its ARM926EJ-S can post-process measurements on-chip while the GPIF II streams raw samples from the ADC. PC 200 MHz ARM926EJ-S handles FFT, averaging, and protocol decoding; the 16-bit external memory bus holds capture buffers; the 512 KB on-chip SRAM holds descriptor tables. PC the USB Test & Measurement Class (USBTMC) firmware from the FX3 SDK turns the device into a SCPI-compatible instrument. According to the FX3 datasheet, sustained 4 Gbps bulk streaming works well for 12-bit ADC sampling at 200 MSPS. Industrial temp variant CYUSB3035-BZXI is recommended for -40C to +85C deployment.
Empfohlen
USB 3.0 Medical Imaging Capture
The CYUSB3013-BZXC suits USB 3.0 medical imaging capture because it sustains 5 Gbps uncompressed streams from ultrasound front-ends and endoscopes. PC the on-chip DMA engine transfers pixel data from the GPIF II port to USB bulk endpoints at line-rate, with zero CPU intervention, reducing latency and jitter for real-time diagnostics. PC the ARM926EJ-S handles USB enumeration, class-specific commands, and image preprocessing. According to Infineon documentation, the medical imaging reference design transfers 4K endoscopy frames at 30 fps over UVC. The 1.2 V core supply and 0 C to +70 C commercial temperature range cover most clinical room environments.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CYUSB3013-BZXC – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CYUSB3035-BZXI | CYUSB3014-BZXC | CYUSB3023-BZXC | CYUSB3035-BZXC |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 121-TFBGA, 10x10 mm | 121-TFBGA, 10x10 mm | 121-TFBGA, 10x10 mm | 121-TFBGA, 10x10 mm | 121-TFBGA, 10x10 mm |
| On-chip SRAM | 512 KB | 512 KB | 128 KB | 256 KB | 512 KB |
| USB Standard | USB 3.1 Gen 1 + USB 2.0 | USB 3.1 Gen 1 + USB 2.0 | USB 3.1 Gen 1 + USB 2.0 | USB 3.1 Gen 1 + USB 2.0 | USB 3.1 Gen 1 + USB 2.0 |
| Core Frequency | up to 200 MHz | up to 200 MHz | up to 200 MHz | up to 200 MHz | up to 200 MHz |
| GPIF II Width | 8/16/32-bit | 8/16/32-bit | 8/16/32-bit | 8/16/32-bit | 8/16/32-bit |
| Operating Temperature | 0 C to +70 C | -40 C to +85 C | 0 C to +70 C | 0 C to +70 C | 0 C to +70 C |
| Charger Detect Output | Yes | No | Yes | Yes | No |
Wichtigste Unterscheidungsmerkmale
- Largest on-chip SRAM in the FX3 family (vs. CYUSB3023-BZXC)
- Retains charger-detect output for USB BC 1.2 compliance (vs. CYUSB3035-BZXI)
- Full 32-bit GPIF II master bus at 100 MHz (vs. CYUSB3014-BZXC)
Designhinweise
Use a continuous ground reference plane on layer 2 directly under the 121-TFBGA footprint, with stitch vias around the perimeter every 1-2 mm to control return-current paths. Route the 5 Gbps SuperSpeed differential pair (USB3_TX_DP/DM and USB3_RX_DP/DM) as a 90-ohm differential with intra-pair skew under 1 ps and length matching within 150 ps. Keep the SuperSpeed pair at least 4x dielectric thickness (>=0.4 mm) away from any other high-speed signal to minimize crosstalk.
Decouple every supply pin with a 0.1 uF X7R MLCC placed within 1 mm of the pin plus a 4.7 uF bulk capacitor within 5 mm. Tie VDD_CORE (1.2 V) and VDD_IO (1.8 V-3.3 V) on independent LDO outputs and add a ferrite bead between the USB PHY analog supply VDD_PHY and the digital 1.2 V rail. According to the FX3 hardware manual, peak transient current on VDD_CORE can reach 250 mA during SuperSpeed link training - a 4.7 uF bulk cap prevents rail collapse.
Configure FSLC[2:0] and PMODE[2:0] strapping pins to the correct boot mode before power-up; incorrect strapping causes the device to enumerate as USB 2.0 only or fail to boot from SPI. Do not leave unused GPIF II data bits floating - tie them to ground through 10 kohm resistors or use them in the GPIF II waveform. Per Infineon FX3 hardware guidance, the external 24 MHz crystal must have <=50 ppm tolerance and load capacitance matched to the on-chip load for USB compliance.
Compliance-Informationen
RoHS compliant per Infineon product page. USB-IF certified under TID # 340800007. AEC-Q100 not applicable - choose CYUSB3035-BZXI for industrial temperature range.
