Renesas Electronics

DG411DYZ - Quad 35Ohm SPST Analog Switch | Renesas Electronics

Teilenummer: DG411DYZ ✓ Aktiv
5 V to 34 V Vdss 35 ohm Rds(on) 16-pin SOIC Package
MOQ: 1 |

DG411DYZ Übersicht

The Renesas Electronics DG411DYZ is a monolithic quad SPST CMOS analog switch with four independent normally closed channels, 35 ohm on-state resistance, 175 ns turn-on time, and 145 ns turn-off time in a 16-pin SOIC package. It is designed for precision signal switching and supports bilateral operation over a ±15 V analog input range.

An analog switch is an integrated semiconductor device that routes or isolates signals under digital control. The DG411 belongs to the analog-switch hierarchy, which includes CMOS analog switches, multiplexers, and demultiplexers. Each of its four SPST channels connects one analog source and drain when the associated control input activates it, allowing one IC to manage four separate signal paths.

The DG411DYZ provides low on-state resistance of 35 ohms, fast switching performance, and closely matched channel resistance. Manufacturer specifications indicate that on-resistance matching between switches is limited to 3 ohms maximum, while on-resistance flatness across the signal range is limited to 4 ohms maximum. These characteristics reduce signal-dependent distortion when switching precision audio, video, instrumentation, or control signals.

The four switches are bilateral and can conduct AC or DC signals in either direction. TTL-compatible and CMOS-compatible control inputs simplify connection to common digital controllers. The manufacturer also positions the DG411 family as a drop-in replacement for the DG211 and DG212 families, providing a practical upgrade path for existing high-voltage switching designs while preserving the familiar 16-pin footprint.

Typical uses include audio and video routing, precision measurement systems, industrial signal multiplexing, data-acquisition front ends, and control systems requiring multiple independently switched analog paths. Its four normally closed channels are especially useful when a default connection must remain active until a control signal commands a transition.

Choose power-supply rails according to the manufacturer datasheet and ensure that input, control, and analog signals remain within their permitted voltage limits. Pay particular attention to supply sequencing and off-state isolation when the switch handles high-impedance sensors. Decoupling should be placed close to the supply pins, while sensitive analog routing should minimize parasitic capacitance and leakage paths.

This product page combines the DG411DYZ electrical characteristics, drop-in replacement considerations, comparison data, and practical layout guidance into a compact engineering reference for analog-signal routing designs.

Drop-in-Alternativen für DG411DYZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit DG411DYZ (gleiche Bauform und Footprint) – abweichend in Number of Switches, Package, Mounting Type, Switch Configuration, On-Resistance Flatness.

Maxim Integrated
Number of Switches: 4
Package: 16-pin CERDIP
Mounting Type: Through hole
Vergleichen mit DG411DYZ →
Vishay Intertechnology
Number of Switches: 4 (quad)
Package: 16-SOIC (0.154 in, 3.90 mm width)
Switch Configuration: SPST, 1:1 (four independent)
Vergleichen mit DG411DYZ →

DG411DY-E3

✅ Drop-In
Vishay Intertechnology
📦 16-pin SOIC
Precision Monolithic Quad SPST CMOS Analog Switch · 4 (quad) · SPST, 1:1 (four independent) · 35 Ohm · CMOS · 0.35 uW (low power) · TTL and CMOS compatible · 15 V / 18 V / 24 V / 28 V class (per distributor listing)

Preis auf Anfrage

Datenblatt ansehen →

DG411DY+T

✅ Drop-In
📦 16-pin SOIC
Same 16-pin SOIC quad-SPST family; the listed on-state resistance is 45 ohm versus 35 ohm, a 28.6% increase.

📋 Referenzalternative (nicht im Katalog)

DG411DY+T

✅ Drop-In
📦 16-pin SOIC
Same 16-pin SOIC quad-SPST function; the listed on-state resistance is 45 ohm versus 35 ohm, a 28.6% increase.

📋 Referenzalternative (nicht im Katalog)

DG411DYZ Grenzwerte & elektrische Eigenschaften

Number of Switches 4 switches
Switch Configuration 4 x SPST
Switch State Normally closed
Maximum On-State Resistance 35 ohm
Turn-On Time 175 ns
Turn-Off Time 145 ns
Supply Voltage Range 5 V to 34 V
Analog Input Range ±15 V
On-Resistance Matching Between Switches 3 ohm maximum
On-Resistance Flatness 4 ohm maximum
Signal Conductivity Bidirectional for AC or DC signals
Logic Compatibility TTL and CMOS compatible
Gehäuse 16-pin SOIC
Montageart Surface mount

DG411DYZ Pin-Konfiguration

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin 1 V+ — Positive power supply
Pin 2 S1 — Control input for switch 1
Pin 3 D1 — Drain terminal for switch 1
Pin 4 V- — Negative power supply
Pin 5 S2 — Control input for switch 2
Pin 6 D2 — Drain terminal for switch 2
Pin 7 S3 — Control input for switch 3
Pin 8 D3 — Drain terminal for switch 3
Pin 9 D4 — Drain terminal for switch 4
Pin 10 S4 — Control input for switch 4
Pin 11 V- — Negative power supply
Pin 12 GND — Ground connection
Pin 13 V+ — Positive power supply
Pin 14 V- — Negative power supply
Pin 15 GND — Ground connection
Pin 16 V+ — Positive power supply

Typische Anwendungen

DG411DYZ ist geeignet für 6 Anwendungs: Precision Audio Signal Routing, Video Signal Multiplexing, Industrial Sensor Acquisition, Data Acquisition Front End, Test and Measurement Switching, Embedded Control Signal Isolation.

🎧

Precision Audio Signal Routing

The DG411DYZ fits precision audio routing because each of its four normally closed SPST channels has a maximum on-state resistance of 35 ohm. Matching between switches is specified at 3 ohm maximum, helping reduce channel-dependent gain variation when multiple sources feed a common audio path. Its bidirectional conduction also permits AC signals to flow in either direction. The device can remain connected during normal operation and disconnect a channel when its control input changes state. Engineers should keep analog traces short, maintain a continuous ground reference, and check that the signal amplitude remains within the stated ±15 V analog range.

📺

Video Signal Multiplexing

The DG411DYZ can route multiple video or control signals through four independent, normally closed channels in a compact 16-pin SOIC. The 35-ohm maximum on-resistance provides a practical starting point for low-impedance video routing, while 3-ohm maximum resistance matching helps maintain consistency between selected sources. Fast 175 ns and 145 ns switching times support prompt source changes without requiring a large discrete-switch network. PCB implementation should minimize trace capacitance, keep the analog ground plane continuous, and place any termination components directly at the receiving device.

🏭

Industrial Sensor Acquisition

The DG411DYZ is suitable for multiplexing industrial sensor lines through four independent normally closed channels. Its TTL- and CMOS-compatible controls permit direct use with common controller logic, while bilateral operation supports sensors that source or sink the selected signal. The 35-ohm maximum on-resistance can be evaluated against the sensor output impedance and acquisition-device input impedance before selection. Designers should account for leakage, off-state isolation, and switch capacitance when using high-impedance sensors, and verify that industrial temperature and supply requirements are satisfied by the exact DG411 ordering suffix.

🖥️

Data Acquisition Front End

The DG411DYZ can place four sensor or test signals into a shared data-acquisition path using its four SPST channels. Fast switching times of 175 ns turn-on and 145 ns turn-off reduce dead time during channel changes, while low resistance matching supports repeatable source selection. Because the channels are normally closed, the selected signal remains connected until an active control command transfers it. Place the switch close to the multiplexer node when source impedance is high, provide a low-impedance reference return, and include anti-aliasing components after the switching node to control sampling transients.

🔧

Test and Measurement Switching

The DG411DYZ provides four independently switchable paths for test fixtures, instrument routing, and programmable signal connections. Its normally closed configuration creates a defined default state, which is useful when a measurement path must remain connected during reset or power-up. Maximum on-resistance of 35 ohm and resistance matching of 3 ohm should be included in the measurement-budget calculation. Layout should use short traces and guard spacing from fast digital controls, while grounding practices should prevent injected control current from appearing as an input error.

🧩

Embedded Control Signal Isolation

The DG411DYZ can isolate four external control or analog lines under firmware control. Because each SPST channel operates independently, one command can disconnect an actuator or sensor while the other three remain active. The fast 145 ns turn-off time supports rapid deactivation, and the TTL- and CMOS-compatible logic inputs simplify sequencing. Designers should not treat the 35-ohm path as a zero-ohm conductor; include resistance in actuator drive calculations and verify current, voltage, and power limits against the complete manufacturer electrical characteristics.

What are the key specifications of DG411DYZ that engineers should know?
The DG411DYZ is a four-channel, normally closed SPST CMOS analog switch with 35 ohm maximum on-state resistance and switching times of 175 ns turn-on and 145 ns turn-off. According to the Renesas Electronics DG411, DG412, and DG413 datasheet, the device is bidirectional, supports AC or DC signal conduction, accepts TTL- and CMOS-compatible control inputs, and operates over a ±15 V analog input range. It is packaged in a 16-pin SOIC for surface-mount assembly.
Where can I download the DG411DYZ datasheet PDF?
The official DG411DYZ datasheet is available from the Renesas Electronics document page for the DG411, DG412, and DG413 family. The datasheet is the primary reference for the complete pin configuration, electrical limits, switching characteristics, and recommended application circuits. It also describes the relationship between the DG411 family and the DG211 and DG212 devices.
Where can I find the DG411DYZ pinout?
The DG411DYZ pinout is shown in the pin-configuration section of the Renesas Electronics DG411, DG412, and DG413 datasheet. The 16-pin SOIC contains four independently controlled switch channels, analog drain and source connections, control inputs, positive supply pins, negative supply pins, and ground connections. Use that pin table when assigning PCB tracks and checking the exposed package orientation.
Is the DG411DYZ normally open or normally closed?
The DG411DYZ contains four independent normally closed SPST analog switches. A switch connects its source and drain when the corresponding control input is asserted and opens that path when deasserted. The Renesas Electronics manufacturer datasheet identifies the DG411 as a low-on-resistance, fast-switching device intended for precision analog signal-routing applications.
What is the on-state resistance of the DG411DYZ?
The DG411DYZ has a maximum on-state resistance of 35 ohm. According to the Renesas Electronics manufacturer datasheet, resistance matching among the four switches is limited to 3 ohm maximum, and on-resistance variation across the analog signal range is limited to 4 ohm maximum. These limits help engineers evaluate insertion loss, channel matching, and distortion in precision routing circuits.
Can the DG411DYZ switch bipolar analog signals?
Yes, the DG411DYZ can conduct signals in either direction because its four channels are bilateral. The Renesas Electronics manufacturer datasheet states that the switches can handle AC or bidirectional signals and maintain low on-resistance variation over a ±15 V analog input range. The control and supply limits should still be checked against the complete electrical characteristics before applying the device.
What can replace the DG411DYZ?
The closest documented drop-in choices are the Renesas Electronics DG411DY and DG411DY+T, plus the Analog Devices DG411DY+T, all listed with a 16-pin SOIC implementation and the same quad SPST switching function. Verify package orientation, control polarity, temperature grade, and operating limits against the manufacturer datasheet before replacing DG411DYZ in a qualified design.
Is the DG411DYZ the same as the DG411DY?
The DG411DYZ and DG411DY belong to the same DG411 quad-SPST family, but their ordering suffixes can encode packaging, temperature, or qualification differences. The verified distributor listings identify both as 16-SOIC devices, while the DG411DY+T listing also provides a 45-ohm resistance description. Confirm the complete suffix, pinout, temperature range, and electrical limits before treating them as interchangeable.
DG411DYZ vs DG411DY+T — which is better for an industrial control board?
Choose DG411DYZ when its 35-ohm on-state resistance and ordering-code qualifications meet the board requirements. DG411DY+T is listed as a 16-SOIC quad-SPST switch with 45-ohm on-state resistance, so it may add slightly more insertion loss and channel variation. For either device, check the exact temperature grade, supply limits, and control thresholds required by the industrial test environment.
When should I choose DG411DYZ over another quad SPST analog switch?
Choose DG411DYZ when a design needs four independent normally closed SPST channels, a maximum on-state resistance of 35 ohm, fast 175 ns turn-on and 145 ns turn-off operation, and a 16-pin SOIC footprint. It is particularly suitable when default signal paths must remain connected before control logic activates them. Confirm supply range, control compatibility, and analog signal limits against the manufacturer datasheet.
Is DG411DYZ suitable for audio and video signal routing?
The DG411DYZ is suitable for precision audio and video routing when the selected board impedance and signal amplitude match its electrical limits. Its 35-ohm maximum on-state resistance, 3-ohm maximum channel matching, and 4-ohm maximum flatness help minimize channel-dependent attenuation and distortion. The Renesas Electronics manufacturer datasheet describes the DG411 family as suitable for audio and video applications.
What is the switching speed of the DG411DYZ?
The DG411DYZ has a typical turn-on time of 175 ns and a typical turn-off time of 145 ns. According to the Renesas Electronics manufacturer datasheet, these values support faster signal routing than the DG211 and DG212 families while retaining the same 16-pin family footprint. Actual system timing also depends on control-driver delay, capacitance, and the connected circuit.
Does the DG411DYZ support TTL and CMOS control signals?
Yes, the DG411DYZ accepts TTL-compatible and CMOS-compatible digital control inputs. The Renesas Electronics manufacturer datasheet identifies this logic compatibility as a characteristic of the DG411 family. The control pins operate independently, allowing four analog paths to be routed separately. Confirm input thresholds and absolute maximum ratings for the specific logic supply used in the design.
Where can I buy DG411DYZ and what is its lead time?
Use the Request a Quote form on this page to request DG411DYZ availability, current lead time, minimum order quantity, and production packaging. The quote team can also confirm the exact ordering code, lifecycle status, and whether the requested package and quantity are available. Commercial terms should be confirmed at the time of quotation.
What is the price of DG411DYZ?
The current commercial price for DG411DYZ should be requested through the Request a Quote form on this page. The form allows buyers to confirm unit cost, quantity breaks, currency, stock status, and lead time for the exact ordering code. This avoids quoting an outdated price or a configuration that does not match the required package and shipment quantity.
Is DG411DYZ in stock?
Current DG411DYZ stock should be confirmed through the Request a Quote form on this page. Stock status can vary with the exact ordering suffix, package, production quantity, and shipment destination. Enter the required quantity and packaging information in the form to receive an availability and lead-time response for the transaction.

Technische Referenzdaten für DG411DYZ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose DG411DYZ for precision analog routing that requires four independent normally closed SPST channels, a maximum on-state resistance of 35 ohm, and a 16-pin SOIC footprint. Its 175 ns turn-on and 145 ns turn-off times are useful when source changes must occur quickly, while the 3-ohm resistance-matching and 4-ohm flatness limits support predictable multichannel behavior. DG411DY is the closest same-manufacturer family option when its ordering-suffix temperature, packaging, and qualification details meet the design. DG411DY+T from either Renesas Electronics or Analog Devices uses the same 16-pin SOIC format but is listed at 45 ohm maximum on-state resistance, so select it only after confirming that the 28.6% resistance increase is acceptable. For every option, verify control polarity, supply range, temperature grade, absolute maximum ratings, and qualification requirements before substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt DG411DY DG411DY+T DG411DY+T
Brand Renesas Electronics Renesas Electronics Renesas Electronics Analog Devices
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Number of Circuits 4 4 4 4
Switch Configuration 1:1 SPST DG411 quad-SPST family 1:1 SPST 1:1 SPST
Normal Switch State Normally closed Normally closed Normally closed Normally closed

Wichtigste Unterscheidungsmerkmale

  • Lower maximum on-state resistance (vs. DG411DY+T)
  • Faster specified switching response (vs. DG411DY)
  • Documented channel matching and flatness (vs. DG411DY+T)

Designhinweise

Route each analog source and drain trace as short as practical, especially when driving a high-impedance sensor or measurement input. Place the DG411DYZ near the shared switching node rather than midway between distant sources and receivers. Keep the ground plane continuous beneath the SOIC and avoid splitting return paths between analog and control sections, since inductive coupling can appear as a false input signal.

Include the maximum 35-ohm on-state resistance and the control-dependent charge injection in the signal-error budget. For low-frequency precision measurements, compare the resulting divider error with the acquisition input impedance and add any required termination directly at the receiving input. For fast signals, keep control traces away from sensitive analog nodes and use a continuous reference plane to reduce crosstalk during the 175 ns turn-on and 145 ns turn-off transitions.

Connect the positive, negative, and ground pins according to the pin configuration in the manufacturer datasheet. Decoupling capacitors should be placed close to the relevant supply pins with short ground returns. Do not assume that the analog signal can exceed the device's absolute maximum ratings merely because the selected switch path is open; verify supply, control-input, and signal-pin limits before power-up and hot-plug testing.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The DG411 is an interface IC rather than an automotive-qualified device. Compliance attributes require confirmation for the exact DG411DYZ ordering code and manufacturing status.

Ähnliche Suchanfragen

dg411dyz datasheet DG411DYZ datasheet pdf DG411DYZ pinout DG411DYZ 16 pin SOIC DG411DYZ 35 ohm SPST DG411DYZ switching time DG411DYZ analog switch DG411DYZ equivalent DG411DYZ replacement DG411DYZ vs DG411DY+T DG411DYZ price DG411DYZ stock Renesas DG411DYZ DG411DYZ application circuit DG411DYZ schematic

Verwandte Bauteile & Begriffe

Renesas Electronics DG411DYZ DG411DY DG411DY+T Analog Devices quad SPST analog switch normally closed switch CMOS analog switch analog switch IC interface IC semiconductor on-state resistance 35 ohm charge injection bilateral switching TTL-compatible control CMOS-compatible control 16-pin SOIC SOIC family surface-mount package precision signal routing audio routing video multiplexing industrial sensor acquisition data-acquisition front end
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen