DRV8313PWPR - 2.5A Triple 1/2-H Bridge Driver | TI
Teilenummer: DRV8313PWPR ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.6364 | $4,64 |
| 10 | $3.3485 | $33,49 |
| 100 | $2.9621 | $296,21 |
| 500 | $2.8333 | $1.416,65 |
| 1.000 | $2.7045 | $2.704,50 |
DRV8313PWPR Übersicht
A motor driver is an integrated circuit that translates low-power control signals from a microcontroller into the higher voltage and current needed to drive a motor. The DRV8313PWPR is a triple 1/2-H bridge driver, meaning it contains three independent half-bridge outputs, each capable of sourcing or sinking current. This configuration is ideal for driving three-phase brushless-DC motors, where each phase is connected to one half-bridge. The device also supports independent control of each half-bridge, allowing it to drive solenoids, relays, or other loads.
Key features of the DRV8313PWPR include a wide operating voltage range of 8V to 60V, low on-resistance MOSFETs for high efficiency, and overcurrent, overtemperature, and undervoltage lockout protection. The device also features a low-power sleep mode to reduce quiescent current when the motor is not running. These features make it a robust choice for demanding motor control applications.
The DRV8313PWPR uses a simple PWM interface, allowing direct connection to a microcontroller's PWM outputs. Each half-bridge can be controlled independently, enabling flexible motor control schemes such as trapezoidal or sinusoidal commutation. The device also includes a current-sense output that can be used for closed-loop current control, enhancing system performance.
Typical applications include three-phase brushless-DC motor drives for fans, pumps, and robotics, as well as solenoid drivers and other inductive loads. The wide voltage range and high current capability make it suitable for both 12V and 24V systems, common in industrial and automotive environments.
When designing with the DRV8313PWPR, ensure adequate PCB copper area for heat dissipation, especially at high currents. The exposed thermal pad should be soldered to a large ground plane to improve thermal performance. Additionally, place decoupling capacitors close to the power supply pins to minimize voltage transients.
Drop-in-Alternativen für DRV8313PWPR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
DRV8313PWP
📋 Referenzalternative (nicht im Katalog)
DRV8313PWPRG4
📋 Referenzalternative (nicht im Katalog)
DRV8313PWPRQ1
📋 Referenzalternative (nicht im Katalog)
DRV8312DDW
📋 Referenzalternative (nicht im Katalog)
L6235
📋 Referenzalternative (nicht im Katalog)
DRV8313PWPR Grenzwerte & elektrische Eigenschaften
| Output Current | 2.5 A continuous per channel, 3 A peak |
| Supply Voltage Range | 8 V to 60 V |
| Ausgangskonfiguration | Triple 1/2-H bridge |
| Anzahl der Ausgänge | 3 |
| Control Interface | PWM |
| Betriebstemperaturbereich | -40°C to 125°C |
| Gehäuse | HTSSOP (PWP) 28-pin |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
| MSL-Level | 3 (168 hours) |
| Protection Features | Overcurrent, overtemperature, undervoltage lockout |
| Sleep Mode | Yes |
| Current Sense Output | Yes |
| Motor Type | Three-phase brushless-DC |
DRV8313PWPR Pin-Konfiguration
| Pin 1 | OUT1 — Half-bridge output 1 |
| Pin 2 | OUT2 — Half-bridge output 2 |
| Pin 3 | OUT3 — Half-bridge output 3 |
| Pin 4 | GND — Ground |
| Pin 5 | GND — Ground |
| Pin 6 | VM — Motor supply voltage |
| Pin 7 | VM — Motor supply voltage |
| Pin 8 | IN1 — Control input for OUT1 |
| Pin 9 | IN2 — Control input for OUT2 |
| Pin 10 | IN3 — Control input for OUT3 |
| Pin 11 | SLEEP — Sleep mode control (active low) |
| Pin 12 | VCP — Charge pump capacitor connection |
| Pin 13 | VREG — Regulator output |
| Pin 14 | GND — Ground |
| Pin 15 | GND — Ground |
| Pin 16 | OUT1 — Half-bridge output 1 (duplicate) |
| Pin 17 | OUT2 — Half-bridge output 2 (duplicate) |
| Pin 18 | OUT3 — Half-bridge output 3 (duplicate) |
| Pin 19 | GND — Ground |
| Pin 20 | GND — Ground |
| Pin 21 | VM — Motor supply voltage (duplicate) |
| Pin 22 | VM — Motor supply voltage (duplicate) |
| Pin 23 | IN1 — Control input for OUT1 (duplicate) |
| Pin 24 | IN2 — Control input for OUT2 (duplicate) |
| Pin 25 | IN3 — Control input for OUT3 (duplicate) |
| Pin 26 | SLEEP — Sleep mode control (duplicate) |
| Pin 27 | VCP — Charge pump capacitor connection (duplicate) |
| Pin 28 | VREG — Regulator output (duplicate) |
Typische Anwendungen
DRV8313PWPR ist geeignet für 6 Anwendungs: Three-Phase BLDC Motor Drive, Robotics Actuators, Industrial Automation, Automotive Auxiliary Motors, Home Appliances, Medical Devices.
Three-Phase BLDC Motor Drive
The DRV8313PWPR is ideal for driving three-phase brushless-DC motors in applications such as fans, pumps, and drones. Its 2.5A continuous current capability and 8V-60V supply range make it suitable for a wide variety of motor sizes. The integrated half-bridge drivers simplify the circuit, reducing component count and board space. PWM control allows precise speed and torque regulation, while the current sense output enables closed-loop control for improved efficiency and performance.
Empfohlen
Robotics Actuators
In robotics, the DRV8313PWPR can drive DC motors and solenoids used in actuators. Its independent half-bridge control allows driving multiple loads with a single IC, saving space and cost. The wide voltage range supports various battery configurations, and the protection features ensure reliable operation in dynamic environments. The compact HTSSOP package is suitable for space-constrained robot designs.
Empfohlen
Industrial Automation
The DRV8313PWPR is well-suited for industrial automation equipment such as conveyor belts, pumps, and valve actuators. Its robust protection features (overcurrent, overtemperature, undervoltage) ensure reliable operation in harsh environments. The 8V-60V supply range accommodates standard industrial voltages (24V, 48V). The device's PWM interface allows easy integration with PLCs or industrial microcontrollers.
Empfohlen
Automotive Auxiliary Motors
In automotive applications, the DRV8313PWPR can drive auxiliary motors such as cooling fans, window lifts, and seat adjusters. The wide supply voltage range (8V-60V) covers both 12V and 24V automotive systems. The device's protection features are essential for automotive reliability. The HTSSOP package is suitable for engine control units (ECUs) and body control modules (BCMs).
Empfohlen
Home Appliances
The DRV8313PWPR is used in home appliances like washing machines, dishwashers, and vacuum cleaners to drive BLDC motors. Its low on-resistance and high efficiency help reduce power consumption, meeting energy efficiency standards. The compact package and integrated protection features simplify design and improve reliability. The device's PWM interface is compatible with common appliance microcontrollers.
Empfohlen
Medical Devices
In medical devices such as infusion pumps, ventilators, and surgical tools, the DRV8313PWPR provides reliable motor control. Its wide voltage range and protection features ensure safe operation. The compact HTSSOP package is suitable for portable and space-constrained medical equipment. The device's low quiescent current in sleep mode helps extend battery life in portable devices.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DRV8313PWPR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DRV8313PWP | DRV8312DDW | L6235 |
|---|---|---|---|---|
| Package | HTSSOP-28 (PWP) | HTSSOP-28 (PWP) | HTSSOP-28 (PWP) | HTSSOP-28 (PWP) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics |
| Output Current (Continuous) | 2.5 A | 2.5 A | 3.5 A | 1.4 A |
| Supply Voltage Range | 8 V to 60 V | 8 V to 60 V | 8 V to 60 V | 8 V to 52 V |
| Control Interface | PWM | PWM | PWM | PWM |
| Protection Features | Overcurrent, Overtemperature, UVLO | Overcurrent, Overtemperature, UVLO | Overcurrent, Overtemperature, UVLO | Overcurrent, Overtemperature, UVLO |
| Sleep Mode | Yes | Yes | Yes | No |
| Automotive Grade | No | No | No | No |
Wichtigste Unterscheidungsmerkmale
- Wide supply voltage range (8V-60V) (vs. L6235)
- Higher continuous current (2.5A vs 1.4A) (vs. L6235)
- Sleep mode for power saving (vs. L6235)
Designhinweise
The DRV8313PWPR can dissipate significant power at high currents. The HTSSOP-28 package has an exposed thermal pad that must be soldered to a large ground plane. For continuous operation at 2.5A per channel, ensure the PCB has adequate copper area and vias to conduct heat away. Consider using thermal vias under the pad to improve heat transfer to inner layers.
Place a 0.1uF ceramic capacitor close to each VM pin and a 10uF bulk capacitor near the VM supply. The charge pump capacitor (VCP) should be placed close to the VCP pin. Keep the high-current output traces short and wide to minimize inductance and resistance. Separate the power ground and signal ground to reduce noise.
Do not exceed the absolute maximum supply voltage of 60V. Ensure the SLEEP pin is pulled high for normal operation; leaving it floating may cause unpredictable behavior. The current sense output is a voltage proportional to the load current; use it with an ADC for closed-loop control. Avoid switching the outputs while the motor is spinning at high speed without proper freewheeling diodes.
Compliance-Informationen
RoHS compliant per distributor listings. Not AEC-Q100 qualified; use Q1 variant for automotive.
