DS90C402M/NOPB Dual LVDS Receiver | Texas Instruments
Teilenummer: DS90C402M/NOPB ✓ AktivDS90C402M/NOPB Übersicht
Drop-in-Alternativen für DS90C402M/NOPB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DS90C402M/NOPB (gleiche Bauform und Footprint) – abweichend in Package, Number of Receivers, Operating Temperature Range.
DS90C402M
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →DS90C402MX/NOPB
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →DS90C402M/NOPB Technische Daten
| Product Type | Dual LVDS receiver |
| Number of Receivers | 2 |
| Receiver Threshold Sensitivity | ±100 mV |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Receiver Propagation Delay | 1.5 ns |
| Protocol | LVDS |
| Betriebstemperaturbereich | -40 °C to 85 °C |
| Gehäuse | 8-SOIC, 0.154 inch, 3.90 mm width |
| Anzahl der Pins | 8 |
| Montageart | Surface mount |
| Common-Mode Noise Protection | Supported |
| Application Configuration | Dual high-speed point-to-point interface |
| Compatible Transmitter Family | DS90C401 |
| Packaging | Tube |
| Lead-Free Status | Lead-free part designation |
| Lebenszyklusstatus | Active |
DS90C402M/NOPB 8-soic, 0.154 inch, 3.90 mm width Pinbelegungsleitfaden
Pinbelegung für DS90C402M/NOPB (8-soic, 0.154 inch, 3.90 mm width-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für DS90C402M/NOPB.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
DS90C402M/NOPB ist geeignet für 6 Anwendungs: Dual High-Speed Point-to-Point Links, Industrial Control and Data Acquisition, Test and Measurement Equipment, Embedded Communication Interfaces, Video and Imaging Data Reception, Low-Power Industrial Sensor Interfaces.
Dual High-Speed Point-to-Point Links
The DS90C402M/NOPB is suitable for two independent high-speed LVDS receiver channels in point-to-point equipment. Its dual-receiver organization reduces the number of receiver packages required when two data paths share the same board, while the 1.5 ns propagation delay supports short-latency communication. The device operates from 4.5 V to 5.5 V and provides ±100 mV threshold sensitivity, making it appropriate for compact industrial and test interfaces that need reliable detection of small differential signals. Keep the two input pairs routed with matched impedance, provide a continuous return path, and confirm receiver-versus-transmitter timing across the complete link.
Empfohlen
Industrial Control and Data Acquisition
The DS90C402M/NOPB can receive differential data from remote sensors, controllers, or data-acquisition modules in industrial equipment. Its common-mode noise protection is useful when the receiver shares wiring or board space with switching circuitry, and the -40 °C to 85 °C range supports a broad range of ambient conditions. Two receiver channels can handle paired command or measurement signals without duplicating the receive function. The design should preserve the intended LVDS signal integrity with controlled impedance, uninterrupted reference planes, minimized stubs, and local supply bypassing around the 4.5 V to 5.5 V rail.
Empfohlen
Test and Measurement Equipment
The DS90C402M/NOPB fits instrumentation that receives low-amplitude differential signals from external fixtures, probes, or remote test nodes. The ±100 mV threshold and common-mode protection help distinguish small useful differential signals from noise imposed on the pair, while the 1.5 ns propagation delay assists with high-speed timing budgets. Use the device with properly terminated differential routing and a stable 5 V supply. Care should be taken to keep switching regulators, clocks, and high-current return paths away from the receiver inputs, and the complete input network should be validated with an eye diagram or equivalent signal-integrity measurement.
Empfohlen
Embedded Communication Interfaces
The DS90C402M/NOPB can provide two LVDS receive paths for embedded controllers, peripheral modules, and board-to-board communication links. Its 8-SOIC package offers a compact surface-mount solution, and the dual-channel configuration simplifies termination and receiver placement near the connector. The 4.5 V to 5.5 V operating range is compatible with conventional 5 V digital interfaces, while the low 1.5 ns receiver delay supports efficient data transfer. Confirm the transmitting device’s output levels, timing, and common-mode limits, and route each differential pair as a coupled pair over a continuous ground or reference plane.
Empfohlen
Video and Imaging Data Reception
The DS90C402M/NOPB may be used in imaging and video systems that transfer differential data between a transmitter, processor, or display-related controller. Its two receivers allow paired data paths to be handled in one package, and the ±100 mV threshold is useful for low-amplitude differential signaling. The receiver delay of 1.5 ns supports high-speed links, but the complete timing budget must include the transmitter, cable or PCB propagation, and downstream logic. Maintain controlled differential impedance, avoid discontinuities, and verify common-mode voltage and input protection against the actual source device.
Empfohlen
Low-Power Industrial Sensor Interfaces
The DS90C402M/NOPB is suitable for receiving low-power differential sensor or control signals where board area and power consumption are important. The device is optimized for low-power applications and provides two receiver channels in a single 8-SOIC package. Its ±100 mV threshold can support low-amplitude links, while common-mode protection helps reject noise coupled into wiring. The system should use a regulated supply within 4.5 V to 5.5 V, place bypass capacitance near the device, and preserve a controlled return path so external cable noise does not degrade the differential signal.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DS90C402M/NOPB – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DS90C402M | DS90C402MX/NOPB |
|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Function | Dual LVDS receiver | Dual LVDS receiver | Dual LVDS receiver |
| Number of Receivers | 2 | 2 | 2 |
| Number of Drivers | 0 | 0 | 0 |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Receiver Threshold Sensitivity | ±100 mV | ±100 mV | ±100 mV |
| Receiver Propagation Delay | 1.5 ns | 1.5 ns | 1.5 ns |
| Operating Temperature Range | -40 °C to 85 °C | -40 °C to 85 °C | -40 °C to 85 °C |
| Protocol | LVDS | LVDS | LVDS |
| Common-Mode Noise Protection | Supported | Supported | Supported |
Wichtigste Unterscheidungsmerkmale
- Two LVDS receiver channels in one package (vs. DS90C402M)
- Compact 8-SOIC footprint (vs. DS90C402MX/NOPB)
- High-speed receiver performance (vs. DS90C402M)
Designhinweise
Route each LVDS input as a tightly coupled differential pair over a continuous reference plane. Avoid stubs, test pads without appropriate termination, and large discontinuities that can degrade the ±100 mV receiver threshold. Keep the receiver close to the connector or transmitter interface when practical, and use manufacturer-recommended differential impedance and termination values. The complete channel, including transmitter, PCB, cable, and receiver, should be validated for eye opening and jitter.
Place the DS90C402M/NOPB close to the interface connector or companion transmitter and provide a low-impedance 5 V supply connection. Add local bypass capacitance at the device supply pins in accordance with the TI application guidance. Maintain a short return path beneath the differential pair and separate the LVDS routing from noisy switching nodes and high-current power paths to preserve common-mode noise rejection.
Do not substitute the DS90C401 transmitter for a DS90C402 receiver based only on package similarity; the devices have different signal roles. Likewise, verify the exact orderable suffix, pinout, supply limits, and production status before approving a replacement. Check differential input polarity against the manufacturer pin-description table and review system timing with the 1.5 ns receiver delay included alongside transmitter and interconnect delay.
Compliance-Informationen
The /NOPB ordering designation and lead-free status are identified in the product information. RoHS, REACH, halogen-free, and conflict-minerals status are not established by the cited product snippets and should be confirmed in the manufacturer compliance documentation.