DS90C402M/NOPB Dual LVDS Receiver | Texas Instruments
MPN: DS90C402M/NOPB ✓ 啟用中DS90C402M/NOPB 概覽
直接替換替代品,適用於 DS90C402M/NOPB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DS90C402M/NOPB (相同外形與佔位) — 差異在於 Package, Number of Receivers, Operating Temperature Range.
DS90C402M
✅ 直接替換聯絡詢價
查看資料表 →DS90C402MX/NOPB
✅ 直接替換聯絡詢價
查看資料表 →DS90C402M/NOPB 規格
| Product Type | Dual LVDS receiver |
| Number of Receivers | 2 |
| Receiver Threshold Sensitivity | ±100 mV |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Receiver Propagation Delay | 1.5 ns |
| Protocol | LVDS |
| 工作溫度範圍 | -40 °C to 85 °C |
| 封裝 | 8-SOIC, 0.154 inch, 3.90 mm width |
| 腳位數 | 8 |
| 安裝類型 | Surface mount |
| Common-Mode Noise Protection | Supported |
| Application Configuration | Dual high-speed point-to-point interface |
| Compatible Transmitter Family | DS90C401 |
| Packaging | Tube |
| Lead-Free Status | Lead-free part designation |
| 生命週期狀態 | Active |
DS90C402M/NOPB 8-soic, 0.154 inch, 3.90 mm width 腳位配置指南
DS90C402M/NOPB(8-soic, 0.154 inch, 3.90 mm width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DS90C402M/NOPB.
請參閱 資料表 以查看完整腳位配置。
典型應用
DS90C402M/NOPB 適用於 6 應用s: Dual High-Speed Point-to-Point Links, Industrial Control and Data Acquisition, Test and Measurement Equipment, Embedded Communication Interfaces, Video and Imaging Data Reception, Low-Power Industrial Sensor Interfaces.
Dual High-Speed Point-to-Point Links
The DS90C402M/NOPB is suitable for two independent high-speed LVDS receiver channels in point-to-point equipment. Its dual-receiver organization reduces the number of receiver packages required when two data paths share the same board, while the 1.5 ns propagation delay supports short-latency communication. The device operates from 4.5 V to 5.5 V and provides ±100 mV threshold sensitivity, making it appropriate for compact industrial and test interfaces that need reliable detection of small differential signals. Keep the two input pairs routed with matched impedance, provide a continuous return path, and confirm receiver-versus-transmitter timing across the complete link.
推薦
Industrial Control and Data Acquisition
The DS90C402M/NOPB can receive differential data from remote sensors, controllers, or data-acquisition modules in industrial equipment. Its common-mode noise protection is useful when the receiver shares wiring or board space with switching circuitry, and the -40 °C to 85 °C range supports a broad range of ambient conditions. Two receiver channels can handle paired command or measurement signals without duplicating the receive function. The design should preserve the intended LVDS signal integrity with controlled impedance, uninterrupted reference planes, minimized stubs, and local supply bypassing around the 4.5 V to 5.5 V rail.
推薦
Test and Measurement Equipment
The DS90C402M/NOPB fits instrumentation that receives low-amplitude differential signals from external fixtures, probes, or remote test nodes. The ±100 mV threshold and common-mode protection help distinguish small useful differential signals from noise imposed on the pair, while the 1.5 ns propagation delay assists with high-speed timing budgets. Use the device with properly terminated differential routing and a stable 5 V supply. Care should be taken to keep switching regulators, clocks, and high-current return paths away from the receiver inputs, and the complete input network should be validated with an eye diagram or equivalent signal-integrity measurement.
推薦
Embedded Communication Interfaces
The DS90C402M/NOPB can provide two LVDS receive paths for embedded controllers, peripheral modules, and board-to-board communication links. Its 8-SOIC package offers a compact surface-mount solution, and the dual-channel configuration simplifies termination and receiver placement near the connector. The 4.5 V to 5.5 V operating range is compatible with conventional 5 V digital interfaces, while the low 1.5 ns receiver delay supports efficient data transfer. Confirm the transmitting device’s output levels, timing, and common-mode limits, and route each differential pair as a coupled pair over a continuous ground or reference plane.
推薦
Video and Imaging Data Reception
The DS90C402M/NOPB may be used in imaging and video systems that transfer differential data between a transmitter, processor, or display-related controller. Its two receivers allow paired data paths to be handled in one package, and the ±100 mV threshold is useful for low-amplitude differential signaling. The receiver delay of 1.5 ns supports high-speed links, but the complete timing budget must include the transmitter, cable or PCB propagation, and downstream logic. Maintain controlled differential impedance, avoid discontinuities, and verify common-mode voltage and input protection against the actual source device.
推薦
Low-Power Industrial Sensor Interfaces
The DS90C402M/NOPB is suitable for receiving low-power differential sensor or control signals where board area and power consumption are important. The device is optimized for low-power applications and provides two receiver channels in a single 8-SOIC package. Its ±100 mV threshold can support low-amplitude links, while common-mode protection helps reject noise coupled into wiring. The system should use a regulated supply within 4.5 V to 5.5 V, place bypass capacitance near the device, and preserve a controlled return path so external cable noise does not degrade the differential signal.
推薦
推薦產品摘要
工程參考資料,適用於 DS90C402M/NOPB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DS90C402M | DS90C402MX/NOPB |
|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Function | Dual LVDS receiver | Dual LVDS receiver | Dual LVDS receiver |
| Number of Receivers | 2 | 2 | 2 |
| Number of Drivers | 0 | 0 | 0 |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Receiver Threshold Sensitivity | ±100 mV | ±100 mV | ±100 mV |
| Receiver Propagation Delay | 1.5 ns | 1.5 ns | 1.5 ns |
| Operating Temperature Range | -40 °C to 85 °C | -40 °C to 85 °C | -40 °C to 85 °C |
| Protocol | LVDS | LVDS | LVDS |
| Common-Mode Noise Protection | Supported | Supported | Supported |
主要差異化特點
- Two LVDS receiver channels in one package (對比DS90C402M)
- Compact 8-SOIC footprint (對比DS90C402MX/NOPB)
- High-speed receiver performance (對比DS90C402M)
設計說明
Route each LVDS input as a tightly coupled differential pair over a continuous reference plane. Avoid stubs, test pads without appropriate termination, and large discontinuities that can degrade the ±100 mV receiver threshold. Keep the receiver close to the connector or transmitter interface when practical, and use manufacturer-recommended differential impedance and termination values. The complete channel, including transmitter, PCB, cable, and receiver, should be validated for eye opening and jitter.
Place the DS90C402M/NOPB close to the interface connector or companion transmitter and provide a low-impedance 5 V supply connection. Add local bypass capacitance at the device supply pins in accordance with the TI application guidance. Maintain a short return path beneath the differential pair and separate the LVDS routing from noisy switching nodes and high-current power paths to preserve common-mode noise rejection.
Do not substitute the DS90C401 transmitter for a DS90C402 receiver based only on package similarity; the devices have different signal roles. Likewise, verify the exact orderable suffix, pinout, supply limits, and production status before approving a replacement. Check differential input polarity against the manufacturer pin-description table and review system timing with the 1.5 ns receiver delay included alongside transmitter and interconnect delay.
合規資訊
The /NOPB ordering designation and lead-free status are identified in the product information. RoHS, REACH, halogen-free, and conflict-minerals status are not established by the cited product snippets and should be confirmed in the manufacturer compliance documentation.