Texas Instruments

DS90C402M/NOPB Dual LVDS Receiver | Texas Instruments

MPN: DS90C402M/NOPB ✓ Active
4.5 V to 5.5 V Vdss 8-SOIC, 0.154 inch, 3.90 mm width Package
MOQ: 1 |

DS90C402M/NOPB Overview

The Texas Instruments DS90C402M/NOPB is a dual low-voltage differential-signaling receiver designed for high-data-rate, point-to-point communication links. The device operates from a 4.5 V to 5.5 V supply, accepts two independent differential receiver channels, and is packaged in an 8-lead small-outline integrated-circuit package. Its receiver threshold sensitivity is ±100 mV, while common-mode noise protection helps reject interference present on the differential signal pair. The DS90C402M/NOPB is designed to work with the DS90C401 transmitter as a complete dual high-speed point-to-point interface solution. The 8-SOIC package provides a compact footprint for systems requiring multiple low-power differential links, including point-to-point serial data connections, industrial control links, test equipment, and embedded communication systems. The part is specified for a 1.5 ns receiver propagation delay and an operating temperature range of -40 °C to 85 °C. Its receiver architecture is intended to support reliable detection of small differential signals while rejecting common-mode noise. The device is supplied in a tube package according to the product information. Applications should account for the specified supply range, differential signal routing, input protection, controlled return paths, and the receiver’s sensitivity threshold. This page consolidates the manufacturer’s electrical information, package details, application guidance, and practical interface considerations for engineers evaluating the DS90C402M/NOPB.

Drop-in alternatives for DS90C402M/NOPB — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with DS90C402M/NOPB (same form factor and footprint) — differing in Package, Number of Receivers, Operating Temperature Range.

Texas Instruments
Package: 8-lead SOIC
Texas Instruments
Package: 8-pin SOIC (D)
Number of Receivers: 2 channels
Operating Temperature Range: -40 °C to +85 °C

DS90C402M

✅ Drop-In
Texas Instruments
📦 8-SOIC
Dual LVDS receiver · 2 receivers · ±100 mV · Supported · High data rate · Low power · DS90C401 companion device · Dual high-speed point-to-point interface

Contact for price

View Datasheet →

DS90C402MX/NOPB

✅ Drop-In
Texas Instruments
📦 8-SOIC
Dual LVDS receiver · 2 channels · 0 channels · 155.5 Mbps · 4.5 V to 5.5 V · ±100 mV · Supported · 8-pin SOIC (D)

Contact for price

View Datasheet →

DS90C402M/NOPB Specifications

Product Type Dual LVDS receiver
Number of Receivers 2
Receiver Threshold Sensitivity ±100 mV
Supply Voltage Range 4.5 V to 5.5 V
Receiver Propagation Delay 1.5 ns
Protocol LVDS
Operating Temperature Range -40 °C to 85 °C
Package 8-SOIC, 0.154 inch, 3.90 mm width
Number of Pins 8
Mounting Type Surface mount
Common-Mode Noise Protection Supported
Application Configuration Dual high-speed point-to-point interface
Compatible Transmitter Family DS90C401
Packaging Tube
Lead-Free Status Lead-free part designation
Lifecycle Status Active

DS90C402M/NOPB 8-soic, 0.154 inch, 3.90 mm width Pin Configuration Guide

Pin configuration for DS90C402M/NOPB (8-soic, 0.154 inch, 3.90 mm width package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

8-soic, 0.154 inch, 3.90 mm width package pinout diagram for DS90C402M/NOPB

No detailed pinout data available for DS90C402M/NOPB.

Refer to the datasheet for full pin configuration.

Typical Applications

DS90C402M/NOPB is suitable for 6 applications: Dual High-Speed Point-to-Point Links, Industrial Control and Data Acquisition, Test and Measurement Equipment, Embedded Communication Interfaces, Video and Imaging Data Reception, Low-Power Industrial Sensor Interfaces.

🌐

Dual High-Speed Point-to-Point Links

The DS90C402M/NOPB is suitable for two independent high-speed LVDS receiver channels in point-to-point equipment. Its dual-receiver organization reduces the number of receiver packages required when two data paths share the same board, while the 1.5 ns propagation delay supports short-latency communication. The device operates from 4.5 V to 5.5 V and provides ±100 mV threshold sensitivity, making it appropriate for compact industrial and test interfaces that need reliable detection of small differential signals. Keep the two input pairs routed with matched impedance, provide a continuous return path, and confirm receiver-versus-transmitter timing across the complete link.

🏭

Industrial Control and Data Acquisition

The DS90C402M/NOPB can receive differential data from remote sensors, controllers, or data-acquisition modules in industrial equipment. Its common-mode noise protection is useful when the receiver shares wiring or board space with switching circuitry, and the -40 °C to 85 °C range supports a broad range of ambient conditions. Two receiver channels can handle paired command or measurement signals without duplicating the receive function. The design should preserve the intended LVDS signal integrity with controlled impedance, uninterrupted reference planes, minimized stubs, and local supply bypassing around the 4.5 V to 5.5 V rail.

📺

Test and Measurement Equipment

The DS90C402M/NOPB fits instrumentation that receives low-amplitude differential signals from external fixtures, probes, or remote test nodes. The ±100 mV threshold and common-mode protection help distinguish small useful differential signals from noise imposed on the pair, while the 1.5 ns propagation delay assists with high-speed timing budgets. Use the device with properly terminated differential routing and a stable 5 V supply. Care should be taken to keep switching regulators, clocks, and high-current return paths away from the receiver inputs, and the complete input network should be validated with an eye diagram or equivalent signal-integrity measurement.

🖥️

Embedded Communication Interfaces

The DS90C402M/NOPB can provide two LVDS receive paths for embedded controllers, peripheral modules, and board-to-board communication links. Its 8-SOIC package offers a compact surface-mount solution, and the dual-channel configuration simplifies termination and receiver placement near the connector. The 4.5 V to 5.5 V operating range is compatible with conventional 5 V digital interfaces, while the low 1.5 ns receiver delay supports efficient data transfer. Confirm the transmitting device’s output levels, timing, and common-mode limits, and route each differential pair as a coupled pair over a continuous ground or reference plane.

📺

Video and Imaging Data Reception

The DS90C402M/NOPB may be used in imaging and video systems that transfer differential data between a transmitter, processor, or display-related controller. Its two receivers allow paired data paths to be handled in one package, and the ±100 mV threshold is useful for low-amplitude differential signaling. The receiver delay of 1.5 ns supports high-speed links, but the complete timing budget must include the transmitter, cable or PCB propagation, and downstream logic. Maintain controlled differential impedance, avoid discontinuities, and verify common-mode voltage and input protection against the actual source device.

🧩

Low-Power Industrial Sensor Interfaces

The DS90C402M/NOPB is suitable for receiving low-power differential sensor or control signals where board area and power consumption are important. The device is optimized for low-power applications and provides two receiver channels in a single 8-SOIC package. Its ±100 mV threshold can support low-amplitude links, while common-mode protection helps reject noise coupled into wiring. The system should use a regulated supply within 4.5 V to 5.5 V, place bypass capacitance near the device, and preserve a controlled return path so external cable noise does not degrade the differential signal.

Recommended Products Summary

DS90C401 Complementary LVDS transmitter family for dual point-to-point links Used in: Dual High-Speed Point-to-Point Links, Industrial Control and Data Acquisition, Test and Measurement Equipment, Embedded Communication Interfaces, Video and Imaging Data Reception, Low-Power Industrial Sensor Interfaces
What is the DS90C402M/NOPB?
The DS90C402M/NOPB is a Texas Instruments dual LVDS receiver IC with two independent receiver channels in an 8-lead SOIC package. According to the manufacturer product page and datasheet, it is optimized for high-data-rate and low-power point-to-point interfaces, operates from 4.5 V to 5.5 V, and provides a receiver threshold sensitivity of ±100 mV. It can pair with the DS90C401 transmitter to form a complete dual high-speed point-to-point interface solution.
What is the operating voltage of DS90C402M/NOPB?
The DS90C402M/NOPB operates from 4.5 V to 5.5 V. The manufacturer datasheet identifies the device as a 5 V LVDS receiver, and the distributor specification listing also records a 4.5 V minimum and 5.5 V maximum supply voltage. The receiver should therefore be powered from a regulated 5 V rail when used in a conventional LVDS interface. Confirm the actual rail tolerance, decoupling requirements, and signal-level compatibility in the system power architecture before layout release.
How many LVDS receivers are in DS90C402M/NOPB?
The DS90C402M/NOPB contains two LVDS receivers. The manufacturer describes it as a dual receiver device, and the distributor listing identifies the part as a 0-driver, 2-receiver LVDS device. This makes it suitable for systems that need to receive two differential channels in one package, such as a bidirectional control interface, a dual-channel data connection, or a receiver pair paired with the DS90C401 transmitter family.
What is the receiver sensitivity of DS90C402M/NOPB?
The DS90C402M/NOPB provides ±100 mV receiver threshold sensitivity. According to the TI product page and datasheet, this sensitivity allows detection of small differential signals while the receiver’s common-mode protection helps reject noise common to both sides of the differential pair. In a PCB design, maintain a controlled differential impedance and minimize discontinuities so the useful differential voltage reaches the receiver without excessive attenuation or reflection.
Is DS90C402M/NOPB compatible with DS90C401?
Yes. The DS90C402M/NOPB is designed to work with the DS90C401 as a pair-chip solution for dual high-speed point-to-point interfaces. The manufacturer product page specifically identifies the DS90C401 as the complementary transmitter family. The pairing is appropriate when the system requires two receiver channels and a matching transmitter arrangement, provided the board design follows the manufacturer’s recommended LVDS interface, termination, and supply-decoupling practices.
What package does DS90C402M/NOPB use?
The DS90C402M/NOPB uses an 8-lead small-outline integrated-circuit package, identified in the product information as 8-SOIC with a 0.154 inch, 3.90 mm body width. The distributor listing describes the package as 8-SOIC, and TI identifies the part as an SOIC (D) package with 8 pins. The surface-mount package allows the receiver to be placed close to the LVDS connector or transceiver circuitry while keeping the PCB footprint compact.
Where can I download the DS90C402M/NOPB datasheet PDF?
The official DS90C402M/NOPB datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ds90c402.pdf. The manufacturer product page is https://www.ti.com/product/DS90C402, and the exact orderable part is listed at https://www.ti.com/product/DS90C402/part-details/DS90C402M/NOPB. Use these documents for the authoritative electrical characteristics, pin descriptions, recommended application circuit, and package drawing.
Where can I find the DS90C402M/NOPB pinout?
The DS90C402M/NOPB pinout is documented in the manufacturer datasheet at https://www.ti.com/lit/ds/symlink/ds90c402.pdf. The exact part page identifies the component as an 8-pin SOIC (D), while the product page describes the device as an 8-lead small-outline package. Use the pin-description table and package drawing in the TI datasheet when assigning PCB nets and checking differential input polarity and supply connections.
What is the propagation delay of DS90C402M/NOPB?
The DS90C402M/NOPB has a 1.5 ns receiver propagation delay. The distributor specification identifies the part as a dual LVDS receiver with 1.5 ns propagation delay, and the manufacturer product page describes the receiver as optimized for high-data-rate applications. When budgeting interface timing, include the propagation delay together with transmitter delay, cable or PCB delay, connector delay, and receiver response time rather than relying on the receiver value alone.
What is the operating temperature range of DS90C402M/NOPB?
The DS90C402M/NOPB is specified for -40 °C to 85 °C. This range appears in the distributor specification for the exact DS90C402M/NOPB orderable part. For industrial equipment, verify that the complete link remains within this temperature range under worst-case ambient conditions, enclosure heating, and power-supply variation. The receiver’s temperature range should also be checked against the associated transmitter and connector ratings.
Where can I buy DS90C402M/NOPB and what is its lead time?
Use the Request a Quote form on this page to ask about DS90C402M/NOPB availability, order quantity, and current lead time. The exact MPN is identified by Texas Instruments as a lead-free 8-pin SOIC receiver, and distributor records identify the part number. Current stock, minimum order quantity, and production scheduling can change, so request a written quotation for the required quantity and delivery schedule.
What is the price of DS90C402M/NOPB?
Request current DS90C402M/NOPB pricing through the Request a Quote form on this page. Pricing depends on order quantity, packaging, delivery schedule, and current component availability. The part is listed in an 8-SOIC package and is supplied in a tube according to the product information. A quotation allows the required quantity, tube packaging, and target delivery terms to be evaluated together.
Is DS90C402M/NOPB in stock?
Submit a stock request through the Request a Quote form on this page for DS90C402M/NOPB. The product is identified by Texas Instruments and is distributed through electronics suppliers, but current inventory and lead time are time-sensitive and should not be inferred from a general product listing. Include your required quantity, packaging preference, and target assembly schedule in the request.
What can replace DS90C402M/NOPB?
The closest validated replacement is a DS90C402-family 8-SOIC variant with the same dual-receiver architecture, 4.5 V to 5.5 V supply range, and compatible differential-input pinout. DS90C402M and DS90C402MX/NOPB are identified as related orderable variants, but the manufacturer should confirm the exact suffix, electrical conditions, and production status before substitution. Do not use a DS90C401 transmitter as a receiver replacement because its function and signal roles are different.
Is DS90C402M/NOPB the same as DS90C402M?
DS90C402M and DS90C402M/NOPB are related Texas Instruments orderable variants of the DS90C402 dual LVDS receiver. The /NOPB designation identifies the lead-free ordering variant, while the base DS90C402M identifier represents the commercial family part. Engineers should compare the exact suffix and package information in the manufacturer part-details record before treating the two as interchangeable.
What is the best Texas Instruments equivalent for DS90C402M/NOPB?
The closest Texas Instruments equivalent is the DS90C402M variant because it uses the same DS90C402 dual-receiver device family and is associated with the same 8-SOIC package format. For a replacement decision, verify the exact pinout, supply limits, receiver threshold, propagation delay, operating temperature, and lifecycle status in TI’s part-details information. A cross-brand substitute should be selected only after a complete electrical and pin-compatibility review.
When should I choose DS90C402M/NOPB instead of a single-channel LVDS receiver?
Choose DS90C402M/NOPB when the design needs two differential receiver channels, a compact 8-pin footprint, and a 4.5 V to 5.5 V supply. Its dual-channel organization can simplify boards that terminate two LVDS links, while the 1.5 ns receiver delay supports high-speed point-to-point communication. Select a single-channel receiver instead when the system needs only one link, requires a different supply range, or uses a package and pinout not matching the DS90C402M family.

Engineering reference data for DS90C402M/NOPB — comparison, design guidance, and compliance information.

Selection Guide

Choose DS90C402M/NOPB when the board needs two LVDS receive channels, a 4.5 V to 5.5 V supply, and an 8-SOIC footprint. Its ±100 mV threshold, common-mode noise protection, and 1.5 ns receiver delay are appropriate for compact, high-speed point-to-point links, particularly when paired with the DS90C401 transmitter. Select DS90C402M when the exact commercial-family orderable identifier matches the BOM and approved sourcing plan. Use DS90C402MX/NOPB only after confirming the exact suffix conditions and manufacturer documentation. Do not choose a DS90C401 or another transmitter as a substitute. For applications needing a different supply range, more than two channels, automotive qualification, or a different package, evaluate a receiver family with those requirements instead of forcing a DS90C402-family substitution.

Comparison with Alternatives

Parameter This Product DS90C402M DS90C402MX/NOPB
Package 8-SOIC 8-SOIC 8-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Product Function Dual LVDS receiver Dual LVDS receiver Dual LVDS receiver
Number of Receivers 2 2 2
Number of Drivers 0 0 0
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Receiver Threshold Sensitivity ±100 mV ±100 mV ±100 mV
Receiver Propagation Delay 1.5 ns 1.5 ns 1.5 ns
Operating Temperature Range -40 °C to 85 °C -40 °C to 85 °C -40 °C to 85 °C
Protocol LVDS LVDS LVDS
Common-Mode Noise Protection Supported Supported Supported

Key Differentiators

  • Two LVDS receiver channels in one package (vs DS90C402M)
  • Compact 8-SOIC footprint (vs DS90C402MX/NOPB)
  • High-speed receiver performance (vs DS90C402M)

Design Notes

Route each LVDS input as a tightly coupled differential pair over a continuous reference plane. Avoid stubs, test pads without appropriate termination, and large discontinuities that can degrade the ±100 mV receiver threshold. Keep the receiver close to the connector or transmitter interface when practical, and use manufacturer-recommended differential impedance and termination values. The complete channel, including transmitter, PCB, cable, and receiver, should be validated for eye opening and jitter.

Place the DS90C402M/NOPB close to the interface connector or companion transmitter and provide a low-impedance 5 V supply connection. Add local bypass capacitance at the device supply pins in accordance with the TI application guidance. Maintain a short return path beneath the differential pair and separate the LVDS routing from noisy switching nodes and high-current power paths to preserve common-mode noise rejection.

Do not substitute the DS90C401 transmitter for a DS90C402 receiver based only on package similarity; the devices have different signal roles. Likewise, verify the exact orderable suffix, pinout, supply limits, and production status before approving a replacement. Check differential input polarity against the manufacturer pin-description table and review system timing with the 1.5 ns receiver delay included alongside transmitter and interconnect delay.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Yes
Halogen Free
Unknown
Conflict Minerals
Unknown

The /NOPB ordering designation and lead-free status are identified in the product information. RoHS, REACH, halogen-free, and conflict-minerals status are not established by the cited product snippets and should be confirmed in the manufacturer compliance documentation.

Related Searches

ds90c402m nopb DS90C402M/NOPB datasheet DS90C402M/NOPB datasheet pdf DS90C402M/NOPB pinout DS90C402M/NOPB equivalent DS90C402M/NOPB replacement DS90C402M/NOPB cross reference DS90C402M/NOPB price DS90C402M/NOPB stock Texas Instruments DS90C402M/NOPB DS90C402 8-SOIC LVDS receiver DS90C402M/NOPB vs DS90C402MX/NOPB

Related Components & Terms

Texas Instruments DS90C402M/NOPB DS90C402M DS90C402MX/NOPB DS90C401 dual LVDS receiver LVDS receiver low-voltage differential signaling receiver interface IC semiconductor point-to-point interface differential signaling common-mode noise protection ±100 mV threshold sensitivity 1.5 ns propagation delay 4.5 V to 5.5 V supply 8-SOIC surface mount industrial control test and measurement embedded communication lead-free RoHS REACH
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details