EP1C4F324I7N - Cyclone I FPGA 4K LE FBGA-324 | Intel / Altera
Teilenummer: EP1C4F324I7N ⚠ Letzte Bestellmöglichkeit| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $36.47 | $36,47 |
| 10 | $32.82 | $328,20 |
| 100 | $29.18 | $2.918,00 |
| 500 | $26.45 | $13.225,00 |
| 1.000 | $23.1 | $23.100,00 |
EP1C4F324I7N Übersicht
A field-programmable gate array (FPGA) is a type of programmable logic device (PLD) that allows designers to configure digital logic circuits after manufacturing, sitting within the broader semiconductor hierarchy as follows: FPGA -> programmable logic device (PLD) -> logic IC -> integrated circuit (IC) -> semiconductor. Unlike application-specific integrated circuits (ASICs), FPGAs use configurable logic blocks (CLBs), programmable interconnects, and I/O cells that can be rewired via SRAM, flash, or antifuse technology to implement arbitrary digital functions. The Cyclone I family specifically targets the low-cost segment, replacing discrete logic ICs and small ASICs in volume production.
Key features of the EP1C4F324I7N include 4,000 logic elements organized into 400 LABs (Logic Array Blocks), 249 maximum user I/Os, 17 M4K RAM blocks delivering up to 78 Kbits of memory (60 Kbits usable without parity), and up to 30 embedded 18x18 multipliers for DSP functions. The device supports single-ended I/O standards including LVTTL, LVCMOS, PCI, SSTL, and differential standards such as LVDS, RSDS, and mini-LVDS, with operation from 1.5 V core and 3.3 V / 2.5 V / 1.8 V I/O banks. The I7 speed grade corresponds to a -7 industrial temperature classification, ensuring operation from -40C to +100C ambient.
Architecturally, the Cyclone I combines a 4-input look-up table (LUT) based logic element with an embedded memory block that can be configured as true dual-port, simple dual-port, or single-port RAM, ROM, or shift register. The embedded multipliers operate at up to 250 MHz and are interconnected via a fast MultiTrack interconnect routing fabric, allowing DSP-intensive functions such as FIR filters and FFT butterflies to be implemented without external multipliers. The phase-locked loops (PLLs) provide clock multiplication and division with up to four outputs per PLL, supporting up to four PLLs per device.
Typical applications for the EP1C4F324I7N include industrial control and automation, motor control, video processing front-ends, protocol bridging (PCI to local bus, UART, I2C, SPI glue logic), display controllers for LCD panels, and educational / prototyping platforms. The 249 user I/Os make it well suited to bus-intensive designs where multiple parallel interfaces must be aggregated.
When designing with this FPGA, ensure proper decoupling of each PLL supply pin with both bulk and high-frequency ceramic capacitors, and follow Altera's recommended IBIS models for signal-integrity analysis on high-speed LVDS or SSTL interfaces. Configuration can be performed via JTAG, active serial (AS), or passive serial (PS) modes using an Altera configuration device or a microcontroller.
This page synthesizes distributor pricing, drop-in alternatives within the Cyclone family, and practical design notes not consolidated in any single manufacturer datasheet.
Drop-in-Alternativen für EP1C4F324I7N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EP1C4F324I7N (gleiche Bauform und Footprint) – abweichend in Process Technology, Operating Temperature, RoHS Status, Package, Total RAM Bits.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EP1C4F324I7
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$27.8 / Stück
Datenblatt ansehen →EP1C4F324C7N
✅ Drop-In✓ Auf Lager
$25.75 / Stück
Datenblatt ansehen →EP1C4F324C8N
✅ Drop-In✓ Auf Lager
$14.2 / Stück
Datenblatt ansehen →EP1C4F324C6N
✅ Drop-In✓ Auf Lager
$24.95 / Stück
Datenblatt ansehen →EP1C4F324C6
✅ Drop-In✓ Auf Lager
$16.75 / Stück
Datenblatt ansehen →EP1C4F324I7N Grenzwerte & elektrische Eigenschaften
| Family | Cyclone I |
| Logic Elements | 4000 |
| Logic Array Blocks (LABs) | 400 |
| Maximum User I/Os | 249 |
| Embedded Memory | 78 Kbits (60 Kbits without parity) |
| M4K RAM Blocks | 17 |
| Embedded 18x18 Multipliers | 30 |
| Maximum Internal Frequency | 405 MHz |
| PLLs | 4 |
| Core Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| Gehäuse | FBGA-324 (19 x 19 mm, 1.0 mm pitch) |
| Montageart | Surface Mount |
| Speed Grade | -7 |
| Operating Temperature (Industrial) | -40C to +100C |
| Configuration Modes | JTAG, Active Serial (AS), Passive Serial (PS) |
| Lead-Free / RoHS | Yes (per datasheet) |
| Device Type | FPGA - Field Programmable Gate Array |
EP1C4F324I7N fbga-324 (19 x 19 mm, 1.0 mm pitch) Pinbelegungsleitfaden
Pinbelegung für EP1C4F324I7N (fbga-324 (19 x 19 mm, 1.0 mm pitch)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EP1C4F324I7N.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EP1C4F324I7N ist geeignet für 6 Anwendungs: Industrial Motor Control, Video Processing Front-End, Communication Protocol Bridging, Embedded Control and HMI, Test and Measurement Equipment, Aerospace and Defense Avionics (Legacy).
Industrial Motor Control
The EP1C4F324I7N fits industrial motor-control designs because its 4,000 logic elements and 30 embedded 18x18 multipliers can implement field-oriented control (FOC) algorithms, PWM modulators, and encoder interfaces in a single chip. The -7 industrial speed grade supports operation from -40C to +100C, matching factory-floor and outdoor cabinet environments. With 249 user I/Os the device can directly connect to multi-axis inverter boards, Hall sensors, and resolver excitation circuits. The four PLLs generate precisely phased clocks for ADC sampling and PWM switching, critical for current-loop stability. Compared with a microcontroller-only approach, the Cyclone I offers parallel DSP throughput and deterministic latency that simplify three-phase sine generation and space-vector modulation at switching rates above 20 kHz.
Empfohlen
Video Processing Front-End
In video bridge and display-controller applications, the EP1C4F324I7N provides enough logic to implement ITU-R BT.656 / BT.1120 capture, de-interlacing, color-space conversion, and overlay composition. The 17 M4K RAM blocks (78 Kbits total) serve as line buffers for temporal video processing at SD resolutions, and the LVDS receivers support direct connection to CMOS image sensors and HDMI bridges. The 405 MHz internal clock enables pixel-clock multiplication and frame-rate conversion. The 1.5 V core supply and 130 nm process deliver low-power operation suited to fanless embedded displays. Compared with a stand-alone video processor ASIC, the FPGA path allows in-field protocol upgrades and customer-specific menu or OSD customization without silicon re-spin.
Empfohlen
Communication Protocol Bridging
The EP1C4F324I7N is well suited to glue-logic and protocol-bridging applications, including PCI-to-local-bus bridges, UART/SPI/I2C aggregation, Ethernet MAC front-ends, and CAN-to-UART converters. The 249 user I/Os accept numerous parallel buses, while the embedded multipliers support CRC, checksum, and whitening operations required by serial protocols. The 4 K LE fabric comfortably absorbs state machines for arbitration, FIFO control, and timing-sensitive bit-banging. Industrial temperature grade and high I/O count make it a reliable host in telecom and industrial gateway equipment. Compared with discrete logic ICs, a single Cyclone I reduces board area, BOM count, and qualification effort when adding new peripherals to a legacy CPU board.
Empfohlen
Embedded Control and HMI
Human-machine interface (HMI) panels and embedded controllers use the EP1C4F324I7N to drive LCD / TFT panels, scan keypads, run real-time control loops, and interface with host processors. The 4K LE fabric is large enough to implement custom fonts, touch-panel decoding, and graphic primitives while leaving headroom for application logic. The SRAM-backed configuration enables instant-on and field-upgradable firmware via JTAG or active serial flash. The -7 industrial temperature grade allows deployment in factory and outdoor enclosures. Compared with microcontroller + LCD controller chip solutions, the FPGA consolidates timing generation, backlight PWM, and parallel-to-serial conversion in one device, simplifying the BOM.
Empfohlen
Test and Measurement Equipment
Test-and-measurement instruments such as protocol analyzers, logic analyzers front-ends, and programmable signal generators use the EP1C4F324I7N for high-speed pattern generation, capture, and real-time triggering. The 405 MHz internal clock and 30 multipliers support DDS (direct digital synthesis), I/Q generation, and FIR filter implementations. The 4 K LE fabric hosts custom stimulus patterns while the 78 Kbits of RAM captures acquisition buffers. The industrial temperature range and high I/O count allow interfacing with many channels of front-end ADCs and DACs. Compared with fixed-function ASICs, the FPGA path permits post-deployment protocol additions and bug-fix updates that extend product lifecycles.
Empfohlen
Aerospace and Defense Avionics (Legacy)
Long-lifecycle aerospace and defense programs often standardize on the Cyclone I family for non-flight-critical subsystems, mission computers, and ground support equipment, where the EP1C4F324I7N's industrial temperature grade and stable supply chain met qualification requirements when the family was active. The 4 K LE fabric hosts MIL-STD-1553 / ARINC 429 interfaces, custom backplane bridges, and discrete I/O aggregation. Because the Cyclone I family is in last-time-buy, such programs must qualify Cyclone IV or Cyclone 10 LP migration parts under their existing qualification processes. Compared with newer FPGAs, the Cyclone I's mature tool flow and predictable timing closure simplify DO-254 documentation for legacy refresh programs.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EP1C4F324I7N – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EP1C4F324I7 | EP1C4F324C7N | EP1C4F324C8N | EP1C4F324C6N | EP1C4F324C6 |
|---|---|---|---|---|---|---|
| Package | FBGA-324 (19x19 mm) | FBGA-324 (19x19 mm) - same | FBGA-324 (19x19 mm) - same | FBGA-324 (19x19 mm) - same | FBGA-324 (19x19 mm) - same | FBGA-324 (19x19 mm) - same |
| Brand | Intel (formerly Altera) | Intel - same | Intel - same | Intel - same | Intel - same | Intel - same |
| Logic Elements | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 |
| Speed Grade | -7 (industrial) | -7 (industrial) | -7 (commercial) | -8 (commercial, slower) | -6 (commercial, fastest) | -6 (commercial, fastest) |
| Operating Temperature | -40C to +100C (industrial) | -40C to +100C | 0C to +85C | 0C to +85C | 0C to +85C | 0C to +85C |
| Maximum User I/Os | 249 | 249 | 249 | 249 | 249 | 249 |
| Embedded RAM | 78 Kbits (60 Kbits w/o parity) | 78 Kbits | 78 Kbits | 78 Kbits | 78 Kbits | 78 Kbits |
| Embedded Multipliers (18x18) | 30 | 30 | 30 | 30 | 30 | 30 |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Lifecycle Status | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy |
Wichtigste Unterscheidungsmerkmale
- Industrial temperature grade availability in same FBGA-324 footprint (vs. EP1C4F324C7N)
- Higher performance per LE versus Cyclone I -8 variant (vs. EP1C4F324C8N)
- Same logic element count as -6 grade with industrial temp (vs. EP1C4F324C6N)
Designhinweise
The EP1C4F324I7N requires a tightly regulated 1.5 V core supply (VCCINT) plus per-bank VCCIO supplies. Per the Cyclone I Device Handbook, each VCCINT pin should be decoupled with a 0.1 uF ceramic capacitor placed within 100 mil of the ball, plus a 10 uF bulk capacitor per bank of supply pins. VCCA_PLL (PLL analog supply) must be filtered with a ferrite bead and decoupled with 10 uF + 0.1 uF to prevent jitter. Failure to follow the decoupling guidelines can manifest as logic errors or PLL unlock at high toggle rates.
The 324-ball FBGA at 1.0 mm pitch requires microvia (laser-drilled) PCB technology or escape routing on inner layers. Fan-out from the BGA must follow Altera's reference layout, keeping all signal traces on the escape layer impedance-controlled (50 ohm single-ended, 100 ohm differential) when carrying high-speed LVDS or SSTL. Thermal vias under the center balls tied to an internal ground plane help spread the ~1-2 W typical dissipation of the EP1C4 device. Source: AN 114: Altera PCB Design Guidelines for BGA Packages.
Do not configure unused I/O banks without a valid VCCIO supply - leave them connected to a valid rail even if all pins in that bank are unused, or Quartus will flag the configuration as invalid. Also, when migrating between Cyclone I speed grades, the Quartus fitter report may show timing differences that require recompiling with the new device selected; bitstreams are not interchangeable across speed grades. Finally, JTAG chain ordering with EPCS configuration flash on the same chain can cause configuration failure if the order is incorrect.
For LVDS and RSDS outputs on the EP1C4F324I7N, use the Altera IBIS models to perform pre-layout signal-integrity simulation; the device's true and complement pins are tightly matched but board-level skew must be controlled to under 50 ps for >500 Mbps operation. Series-source termination (typically 30-50 ohms) on long LVDS traces reduces overshoot. When using SSTL Class II memories, place the VTT termination voltage and reference divider resistors close to the FPGA bank.
Compliance-Informationen
RoHS-compliant per Altera / Intel product page (lead-free FBGA-324). AEC-Q100 not applicable (industrial temp grade is not the same as automotive qualification). Halogen-free status not stated in retrieved data; flagged unknown.
