EP1S40F780C7N - Stratix FPGA 41,250 LE 780-FBGA | Intel
Teilenummer: EP1S40F780C7N ⚠ Letzte Bestellmöglichkeit| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $185 | $185,00 |
| 10 | $165 | $1.650,00 |
| 100 | $140 | $14.000,00 |
| 500 | $118 | $59.000,00 |
| 1.000 | $99.5 | $99.500,00 |
EP1S40F780C7N Übersicht
An FPGA (Field-Programmable Gate Array) is a type of programmable logic device that allows engineers to implement custom digital logic after manufacturing. FPGAs occupy a unique position in the system hierarchy between fixed-function ASICs (Application-Specific Integrated Circuits) and general-purpose microcontrollers: they offer ASIC-level performance and parallelism for high-throughput datapaths while retaining the flexibility of software-driven reconfiguration. Stratix-family devices specifically target high-performance digital signal processing, communications infrastructure, and parallel processing workloads where logic density and on-chip memory bandwidth dominate the design trade-off. Compared to the older APEX family, Stratix introduced TriMatrix embedded memory and dedicated DSP blocks to accelerate multipliers and FIFOs.
Key features of the EP1S40F780C7N include up to 3,423,744 bits of embedded RAM (TriMatrix memory architecture with three block sizes), 14 DSP blocks for high-speed multiply-accumulate operations, clock management via up to 12 PLLs, support for multiple I/O standards including LVDS, LVPECL, PCI-X, HSTL, and SSTL, and True-LVDS circuitry supporting up to 840 Mbps per channel. The integrated 420 MHz maximum performance rating and lockable phase-shift on each PLL simplify high-speed interface design.
Typical applications include high-speed communications line cards, parallel DSP pipelines such as digital up/down-converters and channelisers, ASIC prototyping, high-end image processing, and parallel data-path coprocessing. The 780-FBGA 29x29 mm, 1.0 mm pitch package offers substantial routing density while remaining compatible with conventional multilayer PCB BGA assembly processes, requiring controlled via-in-pad or microvia construction.
When designing with this Stratix device, plan power sequencing for the 1.5 V core, separate PLL analog supplies, and I/O banks at 1.5/1.8/2.5/3.3 V; use the Stratix PowerPlay early power estimator before layout. For configuration, route JTAG to a header for in-system reprogrammability. Note that the original Altera Cyclone-style vertical migration paths do not exist across Stratix packages - pin-compatible footprint upgrades must stay within the EP1S40F780 family.
This page synthesizes distributor pricing and stock data, drop-in alternative cross-references, and practical design notes not consolidated on the manufacturer datasheet homepage, giving procurement and FPGA design engineers a single-source reference for the EP1S40F780C7N.
Drop-in-Alternativen für EP1S40F780C7N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EP1S40F780C7N (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Speed Grade, Series, DSP Blocks.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EP1S40F780C5N
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
EP1S40F780C6N
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
EP1S40F780C7
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$1150 / Stück
Datenblatt ansehen →EP1S40F780C
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$1450 / Stück
Datenblatt ansehen →EP1S40F780C6
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$125 / Stück
Datenblatt ansehen →EP1S40F780C7N Grenzwerte & elektrische Eigenschaften
| Family | Stratix |
| Logic Elements | 41,250 |
| Embedded Memory (bits) | 3,423,744 |
| Maximum User I/O | 615 |
| Operating Supply Voltage (Core) | 1.5 V |
| Process Technology | 130 nm CMOS |
| Speed Grade | 7 |
| Betriebstemperatur | 0 C to +85 C (Commercial) |
| Gehäuse | 780-BBGA, FC-FBGA, 29 x 29 mm, 1.0 mm pitch |
| Montageart | Surface Mount (BGA) |
| DSP Blocks | 14 |
| Maximum Performance | 420 MHz |
| PLLs | Up to 12 |
| LVDS Data Rate (max) | 840 Mbps per channel |
| Configuration Modes | PS, PPA, PPS, JTAG |
| I/O Standards | LVDS, LVPECL, PCI-X, HSTL, SSTL, LVTTL, LVCMOS |
| TriMatrix Memory | Yes (three block sizes) |
EP1S40F780C7N 780-bbga, fc-fbga, 29 x 29 mm, 1.0 mm pitch Pinbelegungsleitfaden
Pinbelegung für EP1S40F780C7N (780-bbga, fc-fbga, 29 x 29 mm, 1.0 mm pitch-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EP1S40F780C7N.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EP1S40F780C7N ist geeignet für 6 Anwendungs: High-Speed Communications Line Cards, Parallel DSP Pipelines, ASIC Prototyping Platform, High-End Image and Video Processing, Industrial Test and Measurement, Storage and Datacenter Coprocessors.
High-Speed Communications Line Cards
The EP1S40F780C7N's 41,250 logic elements, 3,423,744 bits of TriMatrix embedded memory, and 615 user I/Os make it well suited to telecommunications line cards running multiple SERDES-backed links and packet-processing pipelines. Its LVDS capability up to 840 Mbps per channel and 12 PLLs provide ample clocking flexibility for backplane and front-panel serializer/deserializer functions. The 1.5 V core on a 130 nm CMOS process delivers the timing margin needed for STS-12/STM-4 fabric and OC-48 class forwarding engines. BGA signal-integrity design with controlled-impedance traces and matched-length matching is required to sustain the full data rate.
Empfohlen
Parallel DSP Pipelines
With 14 dedicated DSP blocks rated for 420 MHz performance and TriMatrix memory providing fast block-RAM access, the EP1S40F780C7N is an excellent fit for parallel DSP workloads such as digital up- and down-converters, channelisers for software-defined radio, and beamformers for phased-array radar. Each DSP block can implement 8-bit by 8-bit or smaller multipliers and 9-bit accumulators, freeing logic elements for control-plane logic. The combination of distributed and block RAM at 3.4 Mbits supports deep coefficient tables for FIR filters and FFT twiddle factors. Designers can pair it with high-speed ADCs and DACs for direct-IF sampling architectures.
Empfohlen
ASIC Prototyping Platform
The EP1S40F780C7N provides 41,250 logic elements - sufficient for partitioning and validating mid-complexity ASIC RTL blocks before tapeout. Its deterministic timing model and Quartus II compilation flow let engineers slice a multi-million-gate ASIC across multiple Stratix FPGAs, with LVDS forming high-speed chip-to-chip bridges between partitions. TriMatrix memory blocks emulate ASIC SRAM macros and register files with matching byte-write enables. JTAG-based configuration enables rapid bring-up and incremental compilation. Use a Stratix-based prototyping platform to validate firmware weeks before silicon is back from the fab.
Empfohlen
High-End Image and Video Processing
Video pipelines at SDI, Camera Link, or DVI/HDMI resolutions benefit from the EP1S40F780C7N's 615 user I/Os for parallel video buses and its 3,423,744 bits of RAM for line buffers and frame-store FIFOs. The 14 DSP blocks accelerate 2-D convolution, motion estimation, and color-space conversion operations in real time. Color subsampling, scaling, and deinterlacing can be implemented entirely in fabric with deterministic latency suitable for broadcast environments. The 780-BGA package supports the high pin-count needed to capture 48-bit parallel video plus auxiliary metadata lanes simultaneously.
Empfohlen
Industrial Test and Measurement
Automated test equipment, protocol analyzers, and logic-analyzer front-end designs leverage the EP1S40F780C7N's parallel logic, generous user I/O count, and 12 PLLs to manage multiple synchronous sampling domains. TriMatrix memory captures deep waveform traces for offline analysis while DSP blocks perform real-time FFT, statistics, and pattern recognition. The commercial 0 C to +85 C operating range covers most lab and factory environments. Pairing it with high-speed comparators and ADCs yields a flexible multi-channel measurement front end.
Empfohlen
Storage and Datacenter Coprocessors
The EP1S40F780C7N can act as a hardware-accelerated RAID engine, encryption preprocessor, or compression co-processor in storage subsystems. Its TriMatrix memory provides low-latency buffer space for sector reassembly and AES S-boxes while the DSP blocks handle Reed-Solomon or LDPC coding. LVDS links up to 840 Mbps aggregate directly to SAS/SATA expander chips or inter-FPGA bridges in clustered storage arrays. With 615 I/Os the device can manage many disk channels in parallel while maintaining deterministic throughput under bursty IO patterns.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EP1S40F780C7N – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EP1S40F780C5N | EP1S40F780C6N | EP1S40F780C7 | EP1S40F780C | EP1S40F780C6 |
|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Package | 780-BBGA, FC-FBGA, 29x29 mm, 1.0 mm pitch | 780-BBGA, FC-FBGA, 29x29 mm - same | 780-BBGA, FC-FBGA, 29x29 mm - same | 780-BBGA, FC-FBGA, 29x29 mm - same | 780-BBGA, FC-FBGA, 29x29 mm - same | 780-BBGA, FC-FBGA, 29x29 mm - same |
| Logic Elements | 41,250 | 41,250 | 41,250 | 41,250 | 41,250 | 41,250 |
| Embedded Memory (bits) | 3,423,744 | 3,423,744 | 3,423,744 | 3,423,744 | 3,423,744 | 3,423,744 |
| Maximum User I/O | 615 | 615 | 615 | 615 | 615 | 615 |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Operating Temperature | 0 C to +85 C (Commercial) | 0 C to +85 C | 0 C to +85 C | 0 C to +85 C | 0 C to +85 C | 0 C to +85 C |
Wichtigste Unterscheidungsmerkmale
- Higher timing margin at the same density tier (vs. EP1S40F780C5N)
- Pb-free tray packaging (vs. EP1S40F780C7 (without N suffix))
- Faster speed grade than C6 family variants (vs. EP1S40F780C6N)
Designhinweise
The Stratix EP1S40F780C7N requires four supply rails: VCCINT (1.5 V core), VCCIO (per-bank, 1.5/1.8/2.5/3.3 V), VCC_PLL (1.5 V analog PLL), and VCCPD (pre-driver, 3.3 V). Use low-ESR decoupling with at least 10 x 0.1 uF + 4 x 10 uF ceramic per rail plus a bulk tantalum or polymer cap of 220 uF minimum. Power-on reset requires VCCINT to ramp monotonically before VCCPD; Altera recommends power sequencing to avoid JTAG instability. Run the Stratix PowerPlay early power estimator before layout to size regulators and PCB copper.
The 780-BGA 29 x 29 mm 1.0 mm pitch package requires microvia or via-in-pad PCB construction for reliable breakout. Use a 6-layer stack-up with dedicated ground and power planes adjacent to the BGA. Maintain 50 ohm single-ended and 100 ohm differential trace impedance for LVDS pairs; match LVDS trace lengths within 50 mil for the 840 Mbps data rate. Place decoupling capacitors on the bottom side of the PCB directly under the BGA footprint, using short fan-out stubs.
Common pitfalls when designing with EP1S40F780C7N: (1) confusing the EP1S40F780 (780-BGA) and EP1S40F1020 (1020-BGA) packages - they are not pin-compatible, vertical migration is not supported; (2) using Quartus II 6.x or later without ensuring the legacy EP1S40 device support is installed; (3) leaving unused LVDS pairs floating instead of tying them to a defined logic level; (4) ignoring the I/O bank VCCIO constraints when mixing 3.3 V LVTTL with 1.5 V HSTL on the same device; (5) omitting the configuration EPROM or relying solely on JTAG for production programming.
Compliance-Informationen
Pb-free / RoHS-compliant per the 'N' suffix designation. AEC-Q100 not applicable for this FPGA. Halogen-free and conflict-mineral status not explicitly stated in the verified data - flagged as unknown.
