EP3SE110F1152C3 - 107500 Logic Elements Stratix III FPGA | Intel
Teilenummer: EP3SE110F1152C3 ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4017.68 | $4.017,68 |
| 10 | $3900 | $39.000,00 |
| 100 | $3650 | $365.000,00 |
| 500 | $3420 | $1.710.000,00 |
| 1.000 | $3200 | $3.200.000,00 |
EP3SE110F1152C3 Übersicht
An FPGA (Field Programmable Gate Array) is a reprogrammable digital integrated circuit containing an array of configurable logic blocks (CLBs/LABs), programmable interconnect, and hardened IP such as block RAM, DSP slices, and high-speed transceivers. Stratix III sits in Intel's high-performance FPGA hierarchy below Stratix IV/V/10 and above Cyclone families, optimized for ASIC prototyping, signal processing, and high-throughput data-path designs.
Key features include 4,300 Logic Array Blocks (LABs), an 800 MHz internal operating frequency, a 0.9 V core supply rail, and per-device transceivers suitable for multi-gigabit serial links. The 1152-BBGA FCBGA package supports high pin counts while maintaining the signal integrity required by parallel DDR interfaces and stacked die integration. Hardened memory controllers and embedded transceivers offload common functions from soft logic.
Architecturally, the device uses Altera's adaptive logic module (ALM) with 8-input fracturable look-up tables, multi-track interconnect with continuous routing, and TriMatrix memory blocks (MLAB, M9K, M144K). The combination enables both register-rich datapath designs and memory-heavy packet-processing implementations.
Typical applications include ASIC prototyping and emulation, high-speed digital signal processing, radar and beamforming front-ends, software-defined radio baseband, and high-end test and measurement instruments. The high user-I/O count also suits parallel video processing and high-channel-count data-acquisition backplanes.
When designing, plan power-rail sequencing carefully because Stratix III requires well-ordered ramp-up of the 0.9 V core and auxiliary supplies; many designs also use SmartVID to minimize quiescent power. Use the Quartus II toolchain with the Stratix III device library for synthesis, place-and-route, and timing closure.
This page synthesizes distributor pricing, package-level drop-in notes, and engineering guidance not found in the manufacturer datasheet, helping procurement and design engineers evaluate the EP3SE110F1152C3 against same-family and cross-family alternatives.
Drop-in-Alternativen für EP3SE110F1152C3 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EP3SE110F1152C3 (gleiche Bauform und Footprint) – abweichend in Package, Family, Operating Temperature, Speed Grade, Process Technology.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EP3SE110F1152C3N
✅ Drop-In✓ Auf Lager
$1560 / Stück
Datenblatt ansehen →EP3SE110F1152C4
✅ Drop-In✓ Auf Lager
$2200 / Stück
Datenblatt ansehen →EP3SE110F1152C2
✅ Drop-In✓ Auf Lager
$4100 / Stück
Datenblatt ansehen →EP3SL110F1152C3
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
EP3SE110F1152I3
✅ Drop-In✓ Auf Lager
$4150 / Stück
Datenblatt ansehen →EP3SE110F1152C3 Grenzwerte & elektrische Eigenschaften
| Family | Stratix III E |
| Logic Elements | 107,500 |
| Logic Array Blocks (LABs) | 4,300 |
| Adaptive Logic Modules (ALMs) | 43,040 |
| Total Block Memory Bits | 8,936,448 |
| User I/Os | 744 |
| Internal Operating Frequency (max) | 800 MHz |
| Core Supply Voltage | 0.9 V |
| Betriebstemperatur | 0 C to 85 C |
| Gehäuse | 1152-BBGA, FCBGA |
| Montageart | Surface Mount (Flip-Chip BGA) |
| RoHS-Status | Compliant |
| Process Node | 40 nm |
| Speed Grade | C3 (commercial, slower speed grade) |
EP3SE110F1152C3 1152-bbga, fcbga Pinbelegungsleitfaden
Pinbelegung für EP3SE110F1152C3 (1152-bbga, fcbga-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EP3SE110F1152C3.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EP3SE110F1152C3 ist geeignet für 6 Anwendungs: ASIC Prototyping and Emulation, High-Speed Digital Signal Processing, Software-Defined Radio Baseband, Radar and Beamforming Front-End Processing, High-End Test and Measurement Instrumentation, High-Channel-Count Data Acquisition Backplanes.
ASIC Prototyping and Emulation
The EP3SE110F1152C3's 107,500 logic elements and 8.9 Mbits of block memory make it well suited for ASIC prototyping of mid-complexity SoCs and IP blocks. According to the Stratix III device handbook, the ALM-based fabric with embedded TriMatrix memory supports register-rich datapath and memory-heavy transaction models. Designers map RTL via Quartus II place-and-route and use multi-FPGA TDM partitioning for designs exceeding one device.
Empfohlen
High-Speed Digital Signal Processing
With embedded DSP blocks and 800 MHz fabric performance, the EP3SE110F1152C3 handles FFT, FIR, and matrix-multiply kernels common in radar, beamforming, and software-defined radio baseband. The 744 user I/Os support parallel DDR2/DDR3 interfaces to external memory, while the embedded transceivers sustain multi-gigabit serial links to ADC/DAC front-ends. Quartus II DSP Builder accelerates model-based DSP design entry.
Empfohlen
Software-Defined Radio Baseband
The EP3SE110F1152C3 supports wideband baseband processing for LTE, WiMAX, and proprietary wireless standards. The combination of high logic density for PHY-layer processing, abundant block RAM for sample buffering, and integrated transceivers eliminates many external components. The 1152-BGA FCBGA package provides controlled impedance for high-speed serial lanes to RF front-end ICs.
Empfohlen
Radar and Beamforming Front-End Processing
Beamforming requires phase-coherent multi-channel processing at sample rates up to hundreds of MSPS. The EP3SE110F1152C3's ALM fabric and DSP slices deliver parallel multiply-accumulate throughput per channel, while its 8.9 Mbits of block memory holds coefficient tables and windowing functions. The 744 I/Os accommodate LVDS-based ADC/DAC interfaces common in phased-array designs.
Empfohlen
High-End Test and Measurement Instrumentation
Oscilloscope, logic analyzer, and protocol tester backplanes demand the combination of high logic density, abundant memory, and parallel I/O that the EP3SE110F1152C3 provides. Its ALM fabric implements protocol decoders and triggering logic, while TriMatrix memory buffers captured waveforms. The 1152-BGA FCBGA supports controlled-impedance routing required for multi-GSPS ADC interfaces.
Empfohlen
High-Channel-Count Data Acquisition Backplanes
Industrial inspection, medical imaging, and scientific instrumentation backplanes aggregate dozens of ADC/DAC channels. The EP3SE110F1152C3's 744 user I/Os accept multi-lane LVDS or parallel CMOS data from front-end ADCs, while its 107,500 logic elements perform channel calibration, decimation, and packetization. The 8.9 Mbits of block memory buffer sample bursts before DMA transfer to host processors.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EP3SE110F1152C3 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EP3SE110F1152C3N | EP3SE110F1152C4 | EP3SE110F1152C2 | EP3SL110F1152C3 | EP3SE110F1152I3 |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | 1152-BBGA, FCBGA | 1152-BBGA, FCBGA (same) | 1152-BBGA, FCBGA (same) | 1152-BBGA, FCBGA (same) | 1152-BBGA, FCBGA (same) | 1152-BBGA, FCBGA (same) |
| Logic Elements | 107,500 | 107,500 | 107,500 | 107,500 | 107,500 | 107,500 |
| Speed Grade | C3 (commercial) | C3 | C4 (faster) | C2 (slower) | C3 (L sub-family) | I3 (industrial) |
| Sub-Family | Stratix III E | Stratix III E | Stratix III E | Stratix III E | Stratix III L (low power) | Stratix III E |
| Operating Temperature | 0 C to 85 C | 0 C to 85 C | 0 C to 85 C | 0 C to 85 C | 0 C to 85 C | -40 C to 100 C (industrial) |
| User I/Os | 744 | 744 | 744 | 744 | 744 | 744 |
| Total Block Memory | 8,936,448 bits | 8,936,448 bits | 8,936,448 bits | 8,936,448 bits | 8,936,448 bits | 8,936,448 bits |
| Core Voltage | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V |
Wichtigste Unterscheidungsmerkmale
- Mid-range Stratix III E density with 107,500 logic elements (vs. EP3SL110F1152C3)
- Lead-free finish variant available for RoHS builds (vs. EP3SE110F1152C3N)
- Industrial temperature grade option in same package (vs. EP3SE110F1152I3)
- Highest-speed commercial variant in same density (vs. EP3SE110F1152C4)
Designhinweise
Stratix III E devices require sequenced ramp-up of the 0.9 V core and auxiliary rails (VCCAUX, VCCPD, VCCIO) to avoid latch-up. Use the Stratix III PowerPlay Early Power Estimator (EPE) and apply a SmartVID controller to minimize quiescent core current. Decoupling must follow the Stratix III PDN design guidelines with bulk, mid-frequency, and high-frequency capacitors placed as close as possible to each power pin on both top and bottom layers.
The 1152-BGA FCBGA package uses a 1.0 mm ball pitch requiring microvia HDI PCB stack-ups. Maintain controlled impedance for high-speed serial links (100 ohm differential for transceivers, 50 ohm SE for clocks) and route matched-length pairs within 5 mil tolerance for DDR2/DDR3 interfaces. Use the Stratix III package BGA breakout and de-population guidelines for BGA fan-out under the device.
Estimated: with full logic utilization at 800 MHz and the device mounted on a JEDEC 2s2p test board, the EP3SE110F1152C3 dissipates 10-15 W typical. The 1152-BGA FCBGA relies primarily on the PCB thermal ball grid for heat removal; provide at least 16 thermal vias in a 4x4 array directly under the die shadow, connected to inner copper planes. For sealed enclosures, use a heatsink with thermal interface material to keep junction below 100 C.
Do not confuse Stratix III E (enhanced performance) with Stratix III L (low static power) when migrating designs - transceiver and PLL ball assignments differ between sub-families even within the same 1152-BGA package. Verify the Quartus II pin-out file before PCB layout. Also confirm configuration scheme (AS, PS, JTAG, or FPP) and configuration flash density during early design - Cyclone-style FPP modes are supported but require additional pins.
Compliance-Informationen
RoHS compliance per distributor listings; the C3 suffix denotes the original SnPb finish, while the C3N variant is lead-free. AEC-Q100 is not applicable - this is a commercial/industrial-grade FPGA not qualified to automotive standards. REACH, halogen-free, and conflict-mineral data were not present in the verified sources.