EP3SE110F1152I3N - Stratix III E FPGA, 107K LE, 1152-FCBGA | Altera
Teilenummer: EP3SE110F1152I3N ⚠ Letzte Bestellmöglichkeit| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $5015.64 | $5.015,64 |
| 5 | $4780 | $23.900,00 |
| 10 | $4520 | $45.200,00 |
| 25 | $4250 | $106.250,00 |
| 100 | $3980 | $398.000,00 |
EP3SE110F1152I3N Übersicht
A Field Programmable Gate Array (FPGA) is a reprogrammable semiconductor device whose logic fabric, interconnect and I/O can be configured by the end user to implement custom digital circuits, soft processors, DSP pipelines and high-speed serial interfaces. FPGAs sit at the highest level of the programmable-logic taxonomy: programmable logic device (PLD) -> complex programmable logic device (CPLD) -> FPGA -> SoC FPGA. They are preferred over ASICs for low-volume, high-complexity designs and over microcontrollers for parallel, deterministic, low-latency DSP and signal-processing workloads. The Stratix III E family specifically belongs to the high-performance, memory- and multiplier-rich branch of that hierarchy.
Key features include 107,500 logic elements, 8,936,448 RAM bits, 744 user I/Os, 4300 Logic Array Blocks (LABs) per the Mouser listing, a core voltage of 1.1 V, and an industrial operating temperature range (-40C to +100C for the I3 speed grade). The I3N suffix denotes industrial temperature, fast -3 speed grade, lead-free packaging. The device is built on a TSMC 65 nm process and supports up to 12.5 Gbps transceivers in some Stratix III variants, modular I/O banks for vertical migration, output delay and current strength control.
Architecturally, Stratix III E uses Altera's adaptive logic module (ALM), which doubles the effective logic capacity per area versus prior generations, and integrates dedicated DSP blocks (multipliers + adders), M9K/M144K memory blocks, PLLs and a configuration controller. Package and die enhancements include dynamic on-chip termination, programmable output delay and current strength control - features that deliver best-in-class signal integrity at high toggle rates.
Typical applications include high-end ASIC prototyping, wireless baseband DSP, military radar processing, high-performance computing (HPC) acceleration, software-defined radio (SDR), video broadcast infrastructure, and medical imaging front-ends. The high logic and memory density also suit ASIC emulation and design-for-test (DFT) platforms.
When designing with this device, ensure the PCB has a 35 x 35 mm FCBGA footprint with controlled-impedance escape routing, adequate power-rail decoupling for the 1.1 V core and 2.5 V/3.3 V auxiliary supplies, and a JTAG header for Quartus II programming. Heed the Stratix III Device Handbook pinout guidelines for proper bank-by-bank VCCIO grouping.
This page synthesizes real distributor pricing from DigiKey and Mouser, same-brand Altera Stratix III E drop-in variants, and practical design notes not found in the manufacturer datasheet alone.
Drop-in-Alternativen für EP3SE110F1152I3N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EP3SE110F1152I3N (gleiche Bauform und Footprint) – abweichend in Operating Temperature, Speed Grade, Process Technology, Family, Package.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EP3SE110F1152I3
✅ Drop-In✓ Auf Lager
$4150 / Stück
Datenblatt ansehen →EP3SE110F1152I2N
✅ Drop-In✓ Auf Lager
$1480 / Stück
Datenblatt ansehen →EP3SE110F1152C4N
✅ Drop-In✓ Auf Lager
$1395 / Stück
Datenblatt ansehen →EP3SE110F1152C4LN
✅ Drop-In✓ Auf Lager
$3510 / Stück
Datenblatt ansehen →EP3SE110F1152C4L
✅ Drop-In✓ Auf Lager
$3372.13 / Stück
Datenblatt ansehen →EP3SE110F1152C4
✅ Drop-In✓ Auf Lager
$2200 / Stück
Datenblatt ansehen →EP3SE110F1152C3N
✅ Drop-In✓ Auf Lager
$1560 / Stück
Datenblatt ansehen →EP3SE110F1152C3
✅ Drop-In✓ Auf Lager
$3200 / Stück
Datenblatt ansehen →EP3SE110F1152I3N Grenzwerte & elektrische Eigenschaften
| Series | Stratix III E |
| Family | Stratix III E FPGA |
| Manufacturer | Altera (now Intel PSG) |
| Logic Elements (LE) | 107,500 |
| Total RAM Bits | 8,936,448 |
| Maximum User I/Os | 744 |
| Logic Array Blocks (LABs) | 4300 |
| Number of I/O Banks | Modular I/O banks (see Stratix III Device Handbook) |
| Core Voltage | 1.1 V |
| Process Technology | 65 nm CMOS |
| Betriebstemperaturbereich | -40C to +100C (industrial, I3 grade) |
| Speed Grade | -3 (I3 fast grade, industrial) |
| Gehäuse | 1152-ball FC-FBGA (Flip-Chip Fine-pitch BGA) |
| Montageart | Surface Mount |
| Lead-Free / RoHS | Lead-free (N suffix); RoHS compliance status: see Stratix III Device Handbook |
| Configuration | JTAG via Quartus II; supports AS, PS, JTAG, FPP modes |
| Internal Supply Voltage (Max) | 0.94 V (per Partstack listing) |
EP3SE110F1152I3N 1152-ball fc-fbga (flip-chip fine-pitch bga) Pinbelegungsleitfaden
Pinbelegung für EP3SE110F1152I3N (1152-ball fc-fbga (flip-chip fine-pitch bga)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EP3SE110F1152I3N.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EP3SE110F1152I3N ist geeignet für 6 Anwendungs: High-Performance ASIC Prototyping, Wireless Baseband DSP, Military Radar Signal Processing, Software-Defined Radio (SDR) Platforms, Medical Imaging Front-Ends (Ultrasound / CT), Video Broadcast Infrastructure.
High-Performance ASIC Prototyping
The EP3SE110F1152I3N's 107,500 logic elements and 8,936,448 bits of embedded memory let it absorb full ASIC RTL partitions for functional verification before tape-out. Its 744 user I/Os support high-pin-count ASIC emulations across PCIe, DDR2/3 and SerDes channels. Placed on a prototyping PCB with the Quartus II TimeQuest fitter, it typically reaches 200-300 MHz on pipelined designs - close to silicon speed - and the I3 industrial temperature grade allows lab-to-handoff testing without thermal derating.
Empfohlen
Wireless Baseband DSP
With up to 896 18x18 multipliers and dedicated DSP blocks, the EP3SE110F1152I3N is well-suited for 3G/4G baseband channel cards and LTE PHY-layer processing. The high multiplier count and 8.9 Mbit block RAM allow implementation of 256-point FFTs, channel equalizers and turbo-decoder paths in a single device. The 12.5 Gbps-capable transceivers (in Stratix III variants) interface to RF front-ends via CPRI or OBSAI, while the I3 industrial grade supports outdoor base-station environments.
Empfohlen
Military Radar Signal Processing
Radar systems require high-throughput pulse compression, moving-target-indication (MTI) and synthetic-aperture radar (SAR) processing - tasks that map cleanly onto the EP3SE110F1152I3N's DSP blocks and M144K memory. The device's industrial -40C to +100C temperature range is acceptable in many ground- and shipboard-radar enclosures, while its 744 I/Os sustain multi-channel ADC/DAC hookups. The 65 nm process offers better radiation tolerance than smaller nodes at modest clock rates, making it suitable for non-space military platforms.
Empfohlen
Software-Defined Radio (SDR) Platforms
SDR platforms benefit from the EP3SE110F1152I3N's combination of high logic density, large block RAM for sample buffering, and flexible I/O banks supporting LVDS, LVPECL and HSTL for direct ADC interface. A typical wideband-receiver design places a 16-bit ADC at 250-500 MSPS directly into the FPGA's LVDS pairs, then performs channelization, DDC and demodulation in DSP blocks. The I3 industrial temperature grade permits deployment in outdoor SDR enclosures for tactical comms.
Empfohlen
Medical Imaging Front-Ends (Ultrasound / CT)
The EP3SE110F1152I3N's high memory bandwidth and 744 I/Os support ultrasound beamformers with 64-128 channels, each running at 40 MSPS, with on-chip buffering for raw RF data. CT image reconstruction uses the block RAM for sinogram storage and DSP blocks for back-projection kernels. The 1.1 V core keeps per-channel power dissipation low - critical for cart-based and portable medical imaging - while the I3 industrial temperature range suits clinical environments.
Empfohlen
Video Broadcast Infrastructure
Broadcast routers and production switchers use the EP3SE110F1152I3N to handle uncompressed SDI/HD-SDI/3G-SDI streams at 270 Mbps to 3 Gbps, plus JPEG2000 and H.264 encoding pipelines. The device's 744 I/Os aggregate 32-64 SDI streams with on-chip cross-point switching, while its DSP blocks handle real-time video scaling and color-space conversion. Industrial temperature support is essential for outdoor broadcast transmitters and weatherproof head-end equipment.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EP3SE110F1152I3N – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EP3SE110F1152I3 | EP3SE110F1152I2N | EP3SE110F1152C4N | EP3SE110F1152C4LN | EP3SE110F1152C3N |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) |
| Package | 1152-ball FC-FBGA | 1152-ball FC-FBGA - same | 1152-ball FC-FBGA - same | 1152-ball FC-FBGA - same | 1152-ball FC-FBGA - same | 1152-ball FC-FBGA - same |
| Logic Elements | 107,500 | 107,500 | 107,500 | 107,500 | 107,500 | 107,500 |
| Total RAM Bits | 8,936,448 | 8,936,448 | 8,936,448 | 8,936,448 | 8,936,448 | 8,936,448 |
| Maximum User I/Os | 744 | 744 | 744 | 744 | 744 | 744 |
| Speed Grade | I3 (fast, industrial) | I3 (fast, industrial) | I2 (slower, industrial) | C4 (slower, commercial) | C4L (low-power, commercial) | C3 (fast, commercial) |
| Operating Temperature | -40C to +100C (industrial) | -40C to +100C (industrial) | -40C to +100C (industrial) | 0C to +85C (commercial) | 0C to +85C (commercial) | 0C to +85C (commercial) |
| Lead-Free / RoHS | Yes (N suffix) | No (no N suffix) | Yes | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Same 1152-FCBGA footprint across all temperature/speed variants (vs. EP3SE110F780I3N (780-pin FC-FBGA))
- Highest LE and RAM density in the Stratix III E family (vs. EP3SE50F780C4N)
- Industrial temperature range supports field deployment (vs. EP3SE110F1152C4N (commercial 0C-85C))
Designhinweise
The EP3SE110F1152I3N uses a 35 x 35 mm FC-FBGA with 1.0 mm ball pitch (verify exact pitch against the Stratix III Device Handbook pin table). Use a 12-15 mil via-in-pad microvia stack-up (e.g., 4-2-4 or similar HDI process) to escape the inner balls. Maintain 100-ohm differential impedance for LVDS pairs and 50-ohm single-ended for general-purpose CMOS I/O. Apply ground-balls-guard pattern around each differential pair for crosstalk isolation.
Stratix III E devices require separate VCCINT (1.1 V core), VCCAUX (2.5 V), VCCPD (2.5 V or 3.0 V for 3.3 V LVCMOS), per-bank VCCIO (1.2 V-3.0 V), and VCCPGM (1.8 V-3.3 V) rails. Decoupling must include 0.1 uF X7R capacitors at every power-ball cluster plus bulk polymer or tantalum capacitors on each rail. Estimated core current at full utilization (107,500 LE, 50% toggle, 200 MHz) is in the 3-5 A range - size the 1.1 V regulator for at least 8 A with adequate thermal margin.
The 1152-ball FC-FBGA package has a JEDEC JESD51 theta-JA of approximately 10-12 C/W with a 4-layer PCB and proper thermal-via array under the die. Estimated worst-case junction-to-ambient thermal rise at 8 W is 80-100 C, demanding either forced-air cooling or a heat-spreader for industrial temperature compliance. Use the Quartus II PowerPlay early-power-estimator before PCB layout to size the cooling solution.
Do not mix LVDS and 3.3 V LVCMOS within the same I/O bank without confirming VCCIO compatibility. The Stratix III E is sensitive to VCCIO ramp ordering during configuration; ensure all rails reach regulation before MSEL pins are sampled. Failing to enable the CRC error-detection block on critical configuration bitstreams can mask bit-flip-induced system failures in long-lifecycle deployments.
Compliance-Informationen
Lead-free and RoHS-compliant per Stratix III Device Handbook ordering information (N suffix). AEC-Q100 qualification is not applicable for FPGAs; refer to specific application notes for automotive-grade variant EP4CGX series if needed. Halogen-free and conflict-minerals status not explicitly stated in verified data.
