Texas Instruments

LM2904DGKR - Dual 26V 700kHz Op Amp | Texas Instruments

Teilenummer: LM2904DGKR ✓ Aktiv
26 V Vdss 8-pin VSSOP Package
MOQ: 1 |

LM2904DGKR Übersicht

The Texas Instruments LM2904DGKR is a dual general-purpose operational amplifier rated for a 26 V maximum supply, with a gain-bandwidth product of 700 kHz, packaged in an 8-pin VSSOP. The device contains two independent amplifiers, push-pull output stages, and support for single-supply or split-supply operation, making it suitable for cost-sensitive industrial, instrumentation, control, and signal-conditioning systems.

An operational amplifier is a voltage-amplifying component that uses high open-loop gain and negative feedback to create accurate, stable analog signal paths. The dual-amplifier configuration reduces component count where two independent channels are required. Within the broader hierarchy of an operational amplifier, amplifier IC, analog IC, and semiconductor, the LM2904 occupies the general-purpose segment rather than a precision or high-speed specialty category.

The LM2904 family provides low input offset voltage, a common-mode input range that extends to ground, and high differential input-voltage capability. The TI product page identifies the LM2904 as a dual, 26 V, 700 kHz operational amplifier, while the LM2904B family adds upgraded functionality and 36 V high-voltage operation. The LM2904DGKR ordering code specifically identifies the 8-pin VSSOP configuration, supporting compact surface-mount construction.

Each channel is frequency compensated for closed-loop gain of 10 or more. The internal compensation enables straightforward implementation of non-inverting and inverting amplifiers, voltage followers, comparators, summing circuits, and basic active filters. Because the two amplifiers are independent, they can process different analog signals, although common power and ground pins share the total package current and thermal limitations.

Typical uses include industrial sensor interfaces, low-frequency control loops, transducers, audio preamplification, battery-powered monitoring, test equipment, and general-purpose power-supply feedback. The VSSOP footprint is useful when a conventional 8-pin SOIC would occupy excessive board area. Designers should still evaluate input common-mode range, output swing, supply voltage, stability, and noise at the intended operating point.

For reliable layout, place the bypass capacitor at the supply pins and maintain a short return path to the ground pins. Avoid long input traces that can acquire noise, especially when the LM2904 is used with high-impedance sources. Check output-current limits when driving a load, and verify that the selected gain, feedback values, and capacitive loading remain compatible with the device’s frequency-compensated architecture.

This page combines manufacturer specifications, package and sourcing information, compatible replacement options, comparison parameters, and practical layout guidance to support component selection and PCB implementation for the LM2904DGKR.

Drop-in-Alternativen für LM2904DGKR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM2904DGKR (gleiche Bauform und Footprint) – abweichend in Gain-Bandwidth Product, Amplifier Type, Common-Mode Input Range, Maximum Supply Voltage, Operating Temperature Range.

Texas Instruments
Gain-Bandwidth Product: 1.2 MHz
Amplifier Type: Dual general-purpose operational amplifier
Maximum Supply Voltage: 36 V
Vergleichen mit LM2904DGKR →
onsemi
Gain-Bandwidth Product: 1 MHz
Amplifier Type: Dual general-purpose operational amplifier
Common-Mode Input Range: Extends to ground and VEE
Vergleichen mit LM2904DGKR →

LM2904BDGKR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 8-pin VSSOP
Upgraded B-family functionality and 36 V maximum supply versus 26 V for LM2904DGKR, a 10 V or 38% higher voltage rating

📋 Referenzalternative (nicht im Katalog)

LM2904DGD

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 8-pin VSSOP
Same LM2904 electrical family and 8-pin VSSOP footprint, with package marking code DGD instead of DGKR

📋 Referenzalternative (nicht im Katalog)

LM2904DGKR

✅ Drop-In
Texas Instruments
📦 8-pin MSOP/VSSOP
General-purpose operational amplifier · 2 channels · 26 V · 700 kHz · Push-pull · Extends to ground

Preis auf Anfrage

Datenblatt ansehen →

LM2904DG

✅ Drop-In
onsemi
📦 8-pin VSSOP
2 channels · Dual general-purpose operational amplifier · 1 MHz · 0.6 V/us · 3 V to 32 V · 7 mV · 50 dB minimum · -40 C to +105 C

Preis auf Anfrage

Datenblatt ansehen →

LM2904DG

✅ Drop-In
onsemi
📦 8-pin VSSOP
2 channels · Dual general-purpose operational amplifier · 1 MHz · 0.6 V/us · 3 V to 32 V · 7 mV · 50 dB minimum · -40 C to +105 C

Preis auf Anfrage

Datenblatt ansehen →

LM2904DG

✅ Drop-In
onsemi
📦 8-pin VSSOP
2 channels · Dual general-purpose operational amplifier · 1 MHz · 0.6 V/us · 3 V to 32 V · 7 mV · 50 dB minimum · -40 C to +105 C

Preis auf Anfrage

Datenblatt ansehen →

LM2904DGKR Grenzwerte & elektrische Eigenschaften

Amplifier Type General-purpose operational amplifier
Number of Channels 2 channels
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 700 kHz
Ausgangstyp Push-pull
Common-Mode Input Range Extends to ground
Supply Operation Single supply or split supply
Minimum Stable Gain 10 V/V
Gehäuse 8-pin VSSOP
Montageart Surface mount

LM2904DGKR 8-pin vssop Pinbelegungsleitfaden

Pinbelegung für LM2904DGKR (8-pin vssop-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für LM2904DGKR im 8-pin vssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LM2904DGKR.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LM2904DGKR ist geeignet für 6 Anwendungs: Industrial Sensor Signal Conditioning, Power-Supply Feedback Monitoring, Audio Preamplification, Battery-Powered Monitoring, Test and Measurement Instrumentation, Motor and Actuator Control.

🏭

Industrial Sensor Signal Conditioning

The LM2904DGKR is well suited to amplifying low-level industrial sensor signals because it combines a 700 kHz gain-bandwidth product with a common-mode input range extending to ground. Each amplifier channel can provide non-inverting gain, inverting gain, filtering, or buffering, allowing a transducer interface to be implemented with fewer discrete stages. The 26 V maximum supply supports compatibility with many 12 V and 24 V control systems. Place the decoupling capacitor close to the supply pins and use a compact, low-noise return path to ground. Verify the sensor’s output range and the required closed-loop gain against the amplifier’s common-mode and output-swing limits before finalizing the circuit.

⚡

Power-Supply Feedback Monitoring

The LM2904DGKR can monitor a power rail and produce an amplified control or diagnostic signal for an analog controller. Its 26 V maximum supply is useful for higher-voltage feedback nodes, while the common-mode input range extending to ground simplifies measurements near 0 V. One channel may amplify a scaled feedback voltage, and the second can buffer a reference or provide an additional gain stage. The 700 kHz gain-bandwidth product is suitable for slow feedback loops and instrumentation rather than high-frequency compensation. Confirm output swing and load-drive requirements, and connect the bypass capacitor directly across the nearby supply and ground pins to prevent supply ripple from appearing at the amplifier output.

🎧

Audio Preamplification

The dual LM2904DGKR can support two independent low-frequency audio preamplifier channels in consumer, communications, or instrumentation equipment. Its 700 kHz gain-bandwidth product covers the audio band with useful margin, and the common-mode input range extending to ground is valuable for microphone or line-level signals biased near the lower rail. The two push-pull channels can drive lightweight loads or operate as voltage followers into a higher-current driver stage. Keep input traces short and away from switching regulators, provide local supply bypassing, and verify maximum output swing into the intended load. For low-distortion or wide-bandwidth audio requirements, evaluate a newer low-noise amplifier family instead.

📱

Battery-Powered Monitoring

The LM2904DGKR is appropriate for battery-powered condition-monitoring circuits that amplify sensor outputs, compare them with thresholds, or buffer inputs for an embedded controller. Operation from a single supply simplifies dual-channel designs, while split-supply operation supports bipolar signals when required. The common-mode input range extending to ground helps avoid the clipping problems commonly encountered with rail-limited amplifiers at low supply voltages. Because battery systems are efficiency-sensitive, check quiescent current and output-current requirements in the manufacturer datasheet. Use low-leakage protection resistors where necessary, keep the input network compact, and place the supply bypass capacitor close to the device to preserve signal integrity as the battery voltage changes.

🔧

Test and Measurement Instrumentation

The LM2904DGKR can serve as a general-purpose front-end amplifier, buffer, or active summing element in low-frequency test and measurement equipment. Its 700 kHz bandwidth supports measurement paths below several hundred kilohertz, depending on closed-loop gain, while the 26 V supply rating accommodates higher-range instrumentation. The dual configuration allows one channel to condition the input and the other to amplify a reference or output signal. Stable operation at gain of 10 or more is supported by the device architecture, but unusual gain settings, capacitive loads, and very high source impedances require evaluation. Use a ground plane, short feedback paths, and local decoupling to maintain predictable behavior and minimize measurement error.

⚙️

Motor and Actuator Control

The LM2904DGKR can process low-frequency position, current, and feedback signals around motor-control and actuator systems. Two independent channels may handle command conditioning and feedback amplification, reducing the number of packages on a control board. The 26 V maximum supply is relevant to industrial 24 V systems, and the common-mode input range extending to ground supports feedback nodes near the negative rail. The amplifier should not directly drive high current; instead, use it to amplify a sensor or error signal and drive a suitable transistor or motor-driver stage. Verify supply sequencing, transient margin, output loading, and thermal conditions at the highest expected ambient temperature.

What is the operating voltage of LM2904DGKR?
The LM2904DGKR is rated for a maximum supply voltage of 26 V according to the Texas Instruments product page. It can operate from a single supply or from split supplies, making it appropriate for common 5 V, 12 V, 15 V, and 24 V industrial systems. The newer LM2904B family extends the high-voltage capability to 36 V, but that rating should not be applied automatically to the original LM2904DGKR.
What are the key specifications of LM2904DGKR that engineers should know?
The LM2904DGKR is a dual general-purpose operational amplifier with a 26 V maximum supply, 700 kHz gain-bandwidth product, and 8-pin VSSOP package. According to the Texas Instruments product page, it also provides low offset, a common-mode input range extending to ground, and high differential input-voltage capability. Two independent amplifiers are integrated into one surface-mount package for signal conditioning, control, and instrumentation.
Where can I download the LM2904DGKR datasheet PDF?
The official LM2904DGKR documentation is available through the Texas Instruments LM2904 product page at https://www.ti.com/product/LM2904. The manufacturer’s part-detail page at https://www.ti.com/product/LM2904/part-details/LM2904DGKR identifies the specific package ordering code. Use the manufacturer document for the authoritative pin description, absolute maximum ratings, electrical characteristics, and recommended operating conditions.
Where can I find the LM2904DGKR pinout?
The LM2904DGKR pinout is identified as an 8-pin VSSOP, and the official Texas Instruments product page is the correct starting point for the device documentation. Consult the pin-description table in the manufacturer datasheet before assigning PCB tracks, particularly for the two amplifier channels, supply pins, and ground connections. The VSSOP package drawing and pin numbering should be used together during footprint verification.
What can replace the LM2904DGKR?
The LM2904DGKR can be replaced only when the substitute uses the same 8-pin VSSOP footprint and provides a compatible dual-amplifier pin arrangement. The TI LM2904B family offers upgraded functionality and a higher 36 V rating, while compatible LM2904 devices from other manufacturers are identified in cross-reference catalogs. Confirm input common-mode range, output swing, supply limits, stability, and channel-level pin assignments before replacement.
Is the ROHM Semiconductor LM2904DGKR equivalent to the TI LM2904DGKR?
The ROHM Semiconductor LM2904DGKR appears as a separately manufactured 8-MSOP/VSSOP dual general-purpose amplifier, making it the closest cross-brand candidate in the sourcing records. It uses the same LM2904DGKR ordering code and an 8-pin MSOP/VSSOP package, but engineers should compare operating voltage, offset, bandwidth, bias current, output swing, and exact pin functions in each manufacturer’s datasheet before treating it as a drop-in replacement.
LM2904DGKR vs LM2904B: which is better for a 36 V supply?
The LM2904B is the better choice for a 36 V supply because the Texas Instruments product page identifies the LM2904B devices as next-generation versions supporting 36 V operation. The original LM2904DGKR is identified as a 26 V dual operational amplifier. If the original footprint and pin configuration are retained, LM2904B family options can provide an upgrade, but the exact orderable MPN and package must be confirmed.
When should I choose LM2904DGKR over a newer dual op amp?
Choose the LM2904DGKR when a legacy design already uses its 8-pin VSSOP footprint and the application operates below the original 26 V maximum supply. It remains appropriate for cost-sensitive, general-purpose amplification where low offset, ground-referenced common-mode operation, and adequate 700 kHz bandwidth are sufficient. Prefer a newer family member when precision, noise, slew rate, rail-to-rail behavior, or operation above 26 V is required.
Is LM2904DGKR suitable for industrial sensor conditioning?
The LM2904DGKR is suitable for many industrial sensor-conditioning tasks because it supports single and split supplies, has a common-mode input range extending to ground, and operates with a 26 V maximum supply. Its 700 kHz gain-bandwidth product is adequate for low- and moderate-bandwidth signals. Confirm the sensor output range, source impedance, required accuracy, electrical safety isolation, and ambient temperature before using it in a deployed control system.
How should the LM2904DGKR be decoupled on a PCB?
Place the required supply-bypass capacitor directly beside the LM2904DGKR supply and ground pins, and keep its traces short. The exact capacitor value should follow the manufacturer datasheet’s recommended layout and power-supply noise requirements. Avoid routing sensitive amplifier inputs next to switching nodes or long supply-current paths, because the VSSOP’s compact footprint can make return-current geometry especially important.
What are the power and thermal limitations of LM2904DGKR?
The LM2904DGKR can dissipate power in its internal output stages whenever the load current multiplied by the difference between supply voltage and output voltage is nonzero. The VSSOP package also shares heat between the two channels. For exposed calculations, use the actual output current, supply voltage, output voltage, ambient temperature, and the package thermal data from the manufacturer datasheet rather than relying on the 26 V supply rating alone.
Where can I buy LM2904DGKR and what is its lead time?
Use the Request a Quote form on this page to request LM2904DGKR pricing, stock confirmation, and current lead time. The component is also shown in stock by a major online distributor, but inventory and lead time can change without notice. Include the required quantity, package suffix, and target shipment date on the request so the commercial response reflects the exact LM2904DGKR configuration.
How much does LM2904DGKR cost and is it in stock?
Current LM2904DGKR pricing and inventory should be requested through the Request a Quote form on this page. One distributor listing identifies the exact Texas Instruments LM2904DGKR as in stock, but availability can change with market demand and purchasing volume. The quote form can confirm current unit pricing, stock allocation, minimum order quantity, and expected lead time for your specific order.
What is the LM2904DGKR compliance status?
The RoHS, REACH, lead-free, halogen-free, and conflict-minerals status of LM2904DGKR should be confirmed from the manufacturer’s current product documentation or your quality-system record. These declarations can be region- and revision-dependent, so the safest procurement practice is to obtain the applicable manufacturer compliance statement for the exact orderable MPN and package suffix before release to production.
Can LM2904DGKR replace LM2902 in the same circuit?
The LM2904DGKR cannot automatically replace an LM2902 because the two dual op amps may differ in channel count, pin arrangement, supply range, input common-mode range, output capability, and compensation. Although both belong to the general-purpose operational-amplifier category, a PCB-level replacement requires exact pin compatibility and acceptable performance at the actual supply and signal levels. Review the LM2902 datasheet against the LM2904 datasheet before considering a board change.

Technische Referenzdaten für LM2904DGKR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the Texas Instruments LM2904DGKR when maintaining an existing 8-pin VSSOP design that operates below 26 V and needs two general-purpose amplifier channels. Its 700 kHz gain-bandwidth product, push-pull outputs, and common-mode input range extending to ground suit low-frequency instrumentation, industrial control, sensor conditioning, and feedback circuits. Consider the TI LM2904B option when the same family is desirable but a 36 V maximum supply or upgraded functionality is needed. Select a cross-brand LM2904 device only after checking the manufacturer’s pin functions, offset voltage, bandwidth, bias current, output swing, output current, and supply limits against the target design. Do not choose based on package name alone. Use a precision or rail-to-rail amplifier instead when the application requires lower offset, lower noise, faster slew, or output operation close to the supply rails.

Vergleich mit Alternativen

Parameter Dieses Produkt LM2904BDGKR LM2904DGD LM2904DGKR LM2904DG LM2904DG LM2904DG
Brand Texas Instruments Texas Instruments Texas Instruments ROHM Semiconductor STMicroelectronics New Japan Radio Toshiba
Package 8-pin VSSOP 8-pin VSSOP 8-pin VSSOP 8-pin MSOP/VSSOP 8-pin VSSOP 8-pin VSSOP 8-pin VSSOP

Wichtigste Unterscheidungsmerkmale

  • Higher voltage capability in the upgraded same-family option (vs. LM2904DGKR)
  • Dual general-purpose channels in a compact surface-mount package (vs. LM2904DG from STMicroelectronics)
  • Common-mode operation extending to ground (vs. LM2904DG from Toshiba)

Designhinweise

Place the supply-bypass capacitor immediately beside the LM2904DGKR supply and ground pins. Keep both capacitor connections short and use a low-impedance ground return. Because the VSSOP package is compact, inadequate return-current geometry can increase supply noise or create unintended coupling between the two amplifier channels. Route sensitive input nets away from switching nodes and keep the feedback components close to their corresponding amplifier pins.

Do not apply the LM2904B family’s 36 V rating to the original LM2904DGKR, whose maximum supply is 26 V. Also verify that the signal remains inside the common-mode input range and that the output does not exceed its swing limits at the selected load. When substituting another manufacturer’s LM2904 device, compare channel pin functions, differential input limits, quiescent current, output-current capability, and compensation before approving the replacement.

Use short, guarded input traces and avoid long parallel runs beneath noisy switching or digital signals. For high-impedance sources, minimize leakage from adjacent pins and board contamination because input bias current can create voltage errors. Keep the two channels electrically symmetric when they carry related signals, and use a continuous ground plane where practical. Confirm stability with the intended source impedance, load capacitance, gain setting, and feedback network.

Estimated: internal dissipation is approximately equal to output current multiplied by the supply-to-output voltage difference for each active channel. Use the actual worst-case output current, supply voltage, output voltage, and ambient temperature to assess this value, and account for both channels when they operate simultaneously. The VSSOP thermal performance depends strongly on copper area, board construction, and nearby heat sources, so apply the manufacturer’s thermal information for the final PCB.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Obtain the current manufacturer compliance declarations for the exact LM2904DGKR orderable part before production release.

Ähnliche Suchanfragen

lm2904dgkr datasheet LM2904DGKR datasheet pdf LM2904DGKR pinout LM2904DGKR specifications LM2904DGKR equivalent LM2904DGKR replacement LM2904DGKR drop-in replacement LM2904DGKR footprint LM2904DGKR application circuit LM2904DGKR price LM2904DGKR stock Texas Instruments LM2904DGKR LM2904DGKR vs LM2904BDGKR LM2904DGKR 26V 700kHz

Verwandte Bauteile & Begriffe

Texas Instruments LM2904DGKR LM2904BDGKR LM2904DGD ROHM Semiconductor STMicroelectronics New Japan Radio Toshiba dual operational amplifier general-purpose amplifier voltage amplifier analog IC semiconductor single-supply operation split-supply operation common-mode input range input offset voltage gain-bandwidth product push-pull output 8-pin VSSOP MSOP/VSSOP package family surface-mount package industrial control sensor signal conditioning
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen