Texas Instruments

LM293DRE4 Dual Differential Comparator 36V | Texas Instruments

Teilenummer: LM293DRE4 ✓ Aktiv
Single supply or dual supplies Vdss 0.4 mA typical per comparator Id 8-SOIC, 0.154 inch (3.90 mm) width Package
MOQ: 1 |

LM293DRE4 Übersicht

The Texas Instruments LM293DRE4 is a dual differential comparator IC designed for single-supply or split-supply operation, with a maximum tested supply voltage of 36 V and an 8-SOIC package. The device contains two independent comparators with open-collector, open-drain outputs, allowing the output state to be pulled up externally. Its wide supply-voltage range, low supply-current drain of approximately 0.4 mA per comparator, and input common-mode range that includes ground make it suitable for industrial voltage-threshold, sensing, and control applications.

A comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The LM293 belongs to the comparator category within analog signal-chain and power-management ICs, rather than acting as an amplifier or regulator. Two comparators in one package provide independent channels for monitoring two thresholds, controlling two loads, or implementing a window-detection function. The open-collector outputs are useful for wired logic, relay-driver interfaces, and systems requiring a pull-up resistor.

The main electrical characteristics include operation from a single supply or dual supplies, a 2 V to 36 V difference between supply rails, a common-mode input voltage range that includes ground, and low output saturation voltage. The LM293 is specified as compatible with TTL, MOS, and CMOS logic levels. The output structure can sink current from an external pull-up while providing a predictable low-level output, allowing designers to select the pull-up voltage independently of the comparator supply.

The LM293 architecture is based on two independent comparator channels rather than a shared output. This arrangement allows each channel to use separate non-inverting and inverting inputs while sharing the device supply pins. The inputs are intended for low-power threshold sensing, and the operating range supports both traditional positive-supply circuits and circuits using ground as the lower input reference. Open-collector outputs require an external pull-up when a valid high output is required.

Typical applications include industrial process-limit detection, battery and power-supply monitoring, sensor signal conditioning, overvoltage and undervoltage protection, relay or solenoid control interfaces, and window comparators. The comparator can also be used as a simple line-driver or discrete-amplifier element in low-frequency control circuits. Because the output is open collector, the pull-up resistor and load current must be selected to match the desired logic voltage and switching speed.

For PCB design, place the decoupling capacitor close to the supply and ground pins, and route comparator inputs away from switching nodes and high-current paths. The 8-SOIC footprint allows straightforward through-hole assembly and rework. The pull-up resistor should connect from each output to the logic rail used by the receiving device. Confirm the input voltages, supply current, output sink current, and common-mode limits against the application before releasing the design.

This product page combines the manufacturer’s LM293 family information, exact-MPN sourcing details, pin-level integration guidance, and drop-in replacement analysis. It is intended to help engineers move from component identification to schematic review, footprint verification, and robust analog threshold-circuit design.

Drop-in-Alternativen für LM293DRE4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM293DRE4 (gleiche Bauform und Footprint) – abweichend in Package, Common-Mode Input Range, Comparator Type, Supply Configuration, Output Type.

Texas Instruments
Package: 8-SOIC
Supply Configuration: Single supply or split supply
Vergleichen mit LM293DRE4 →
onsemi
Package: 8-pin SOIC
Common-Mode Input Range: Includes ground with single-supply operation
Comparator Type: Dual precision voltage comparator
Vergleichen mit LM293DRE4 →
STMicroelectronics
Package: 8-pin SOIC
Comparator Type: Dual voltage comparator
Vergleichen mit LM293DRE4 →
Texas Instruments
Package: SOIC-8 (D), 3.90 mm body width
Common-Mode Input Range: 0 V to VCC − 1.5 V
Output Type: Open-Collector
Vergleichen mit LM293DRE4 →

LM293DR

✅ Drop-In
Texas Instruments
📦 8-SOIC
Dual differential comparator · Two independent comparators · Open-collector, open-drain · Rail-to-rail · Single supply or split supply

Preis auf Anfrage

Datenblatt ansehen →

LM293DR2G

✅ Drop-In
onsemi
📦 8-SOIC
Dual precision voltage comparator · 2 channels · 2 V to 36 V · 1.3 µs · Open-collector, open-drain · Includes ground with single-supply operation · As low as 2.0 mV for the LM293 series · -25 °C to +85 °C

Preis auf Anfrage

Datenblatt ansehen →

LM293DT

✅ Drop-In
STMicroelectronics
📦 8-SOIC
Dual voltage comparator · 2 channels · 2 V to 36 V · 2 V to 36 V · Rail-to-rail · Open-collector, open-drain · 0.4 mA typical · 1 mW at 5 V

Preis auf Anfrage

Datenblatt ansehen →

LM393DR

✅ Drop-In
Texas Instruments
📦 8-SOIC
Texas Instruments · LM393DR · Dual Differential Comparator · 2 · Open-Collector · 2 V to 36 V · ±1 V to ±18 V · 1 mV

✓ Auf Lager

$0.11 / Stück

Datenblatt ansehen →

LM293DRE4 Grenzwerte & elektrische Eigenschaften

Comparator Type Dual differential comparator
Number of Comparators 2
Ausgangstyp Open-collector, open-drain
Supply Configuration Single supply or dual supplies
Maximum Tested Supply Voltage 36 V
Supply Voltage Difference 2 V to 36 V
Common-Mode Input Range Includes ground
Supply Current Drain 0.4 mA typical per comparator
Output Compatibility TTL, MOS, and CMOS
Output Saturation Low output saturation voltage
Industrial Temperature Grade Industrial grade
Gehäuse 8-SOIC, 0.154 inch (3.90 mm) width
Montageart Surface mount
Anzahl der Pins 8

LM293DRE4 Pin-Konfiguration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUT1 — Comparator 1 open-collector output
Pin 2 IN1- — Comparator 1 inverting input
Pin 3 IN1+ — Comparator 1 non-inverting input
Pin 4 GND — Ground connection
Pin 5 IN2+ — Comparator 2 non-inverting input
Pin 6 IN2- — Comparator 2 inverting input
Pin 7 OUT2 — Comparator 2 open-collector output
Pin 8 VCC — Positive supply connection

Typische Anwendungen

LM293DRE4 ist geeignet für 6 Anwendungs: Industrial Overvoltage Protection, Battery Voltage Monitoring, Sensor Signal Conditioning, Power-Supply Window Detection, Relay and Solenoid Control, Process Line Threshold Control.

🏭

Industrial Overvoltage Protection

The LM293DRE4 is suitable for detecting when a monitored supply exceeds a configured threshold and generating a control signal for protection circuitry. Its 36 V maximum tested supply voltage and common-mode input range that includes ground make it useful for low-voltage industrial rails where the reference and sensed node remain near the lower supply boundary. The open-collector output can directly pull down a fault-enable or shutdown line when the comparator transistor is active. Connect a pull-up resistor to the logic rail, place the threshold divider close to the input pins, and keep the sensed trace away from switching nodes. This arrangement provides a simple, low-power protection stage without requiring an ADC or microcontroller for every voltage decision.

⚡

Battery Voltage Monitoring

In a battery-backed system, the LM293DRE4 can compare a divided cell or pack voltage against a fixed threshold and indicate an undervoltage condition. The common-mode range includes ground, which is valuable for single-supply battery systems, while the 0.4 mA typical drain per comparator keeps the continuous monitoring load modest. The open-collector output can trigger a load-disconnect signal or alert the system controller. Select the resistor divider for the intended cell count, include a suitable pull-up on the output, and account for comparator input offset and resistor tolerance so the switching point does not drift outside the intended battery range.

🧩

Sensor Signal Conditioning

The LM293DRE4 can convert a slowly changing sensor signal into a clean threshold event, such as a high-temperature or low-level indication. A resistor network establishes the switching reference, while the comparator’s input common-mode range including ground supports sensors whose useful signal begins near 0 V. The open-drain output is particularly useful when the next stage needs a wired-AND fault bus or a pull-up to a different logic rail. For noisy sensors, filter the input sufficiently to prevent repeated switching, and keep the comparator input route compact. The result is a simple, low-power digital edge without the complexity of an amplifier chain.

🔋

Power-Supply Window Detection

Two LM293DRE4 comparator channels can implement an upper and lower supply-window monitor. One channel checks the rail against a lower reference and the other checks it against an upper reference, allowing the system to identify undervoltage, overvoltage, or an in-range condition. The wide supply capability and ground-inclusive input range support single-rail designs, while the independent channels provide simple threshold decisions without an additional analog device. Use accurately tolerated divider resistors, define the logic state for each output, and connect suitable pull-ups to the system logic rail. This architecture is useful in power modules where a supervisor signal must remain active outside the acceptable operating range.

🏭

Relay and Solenoid Control

The LM293DRE4 can serve as the decision element in a relay-driver or solenoid-control circuit by sinking current from a transistor or driver stage when a threshold condition is met. Its open-collector output is useful with flyback-protected inductive loads because the pull-up rail can be selected independently, although the output itself should not directly exceed the device’s stated current limits. Add the required flyback diode or suppression network across the coil, ensure the driver transistor has adequate current and voltage margin, and place the comparator supply decoupling near the IC. This approach separates low-current sensing from higher-current load switching and keeps the analog decision path compact.

⚙️

Process Line Threshold Control

In an industrial process-control circuit, the LM293DRE4 can compare a scaled sensor or process voltage with an adjustable reference to generate a binary limit signal. Its two independent channels allow separate high and low limits, and the common-mode range including ground simplifies circuits using 0 V as the lower boundary. The open-collector output can feed a PLC input, alarm line, or transistor-driver stage through a pull-up resistor. Maintain a defined return path for both the comparator and sensed signal, use shielding or filtering when the process node is noisy, and avoid placing long unprotected input traces beside high-current actuator wiring. This provides a rugged threshold stage with low supply consumption.

What is the LM293DRE4?
The LM293DRE4 is a Texas Instruments dual differential comparator in an 8-SOIC package. It contains two independent comparator channels with open-collector, open-drain outputs and operates from a single supply or dual supplies. According to TI’s LM293 product page, the device is intended for industrial-grade applications and supports supply differences from 2 V to 36 V.
What is the maximum supply voltage of LM293DRE4?
The LM293DRE4 supports a maximum tested supply voltage of 36 V. TI’s LM293 family information specifies a 2 V to 36 V difference between the supply rails for dual-supply operation. The exact operating conditions still depend on the comparator configuration, so the manufacturer datasheet should be reviewed before applying a 36 V rail to the device.
Does LM293DRE4 work with single-supply circuits?
Yes, the LM293DRE4 is designed to operate from a single power supply or from dual power supplies. Its input common-mode voltage range includes ground, which allows the non-inverting input to operate near 0 V in single-supply applications. TI’s LM293 datasheet also identifies operation over a 2 V to 36 V supply-rail difference for split-supply arrangements.
Why does the LM293DRE4 need an output pull-up resistor?
The LM293DRE4 uses open-collector, open-drain outputs, so the output cannot independently drive a high voltage. An external pull-up resistor connects each output to the logic rail and creates the high state when the comparator transistor turns off. TI identifies the outputs as compatible with TTL, MOS, and CMOS logic, allowing the pull-up voltage to match the receiving circuit.
What are the LM293DRE4 pin functions?
The 8-SOIC LM293DRE4 uses pins 1 and 7 for the two comparator outputs, pins 2 and 6 for inverting inputs, pins 3 and 5 for non-inverting inputs, pin 4 for ground, and pin 8 for the supply connection. Use the manufacturer’s pin-description table when assigning PCB tracks, especially because the two channels are independent apart from the shared supply connections.
Where can I find the LM293DRE4 datasheet PDF?
The official LM293 family information is available on TI’s product page at https://www.ti.com/product/LM293, and the search results also identify the LM293DRE4 datasheet as a dual-differential-comparator document. Use the manufacturer product page for the current datasheet and ordering information, then confirm the exact LM293DRE4 orderable package and suffix before releasing the BOM.
How much current does each LM293 comparator consume?
Each LM293 comparator typically draws 0.4 mA from the supply, as stated in the LM293 family documentation. The exact current depends on supply voltage, output state, input conditions, and device version. TI’s LM293 datasheet should be used for worst-case supply-current limits when sizing a regulator or calculating battery life.
What can replace the LM293DRE4?
The closest documented replacements are the Texas Instruments LM293DR, LM293DR2G, LM293DT, and LM393DR variants that use a compatible 8-SOIC footprint and retain the dual differential-comparator function. Confirm the exact pin arrangement, supply range, output type, temperature grade, and qualification requirements in the manufacturer datasheet before approving any replacement.
Is LM293DRE4 pin-compatible with LM293DR?
The LM293DR is the nearest exact-family drop-in candidate for the LM293DRE4 because both are LM293 devices in an 8-SOIC package. The comparison should still verify the orderable suffix, temperature grade, and whether the exact electrical revision or marking requirements differ. Use the manufacturer datasheets for both MPNs as the release authority.
LM293DRE4 vs LM393DR: which comparator should I choose?
The LM293DRE4 is the better choice when the design specifically calls for the LM293 family and its established industrial comparator behavior. The LM393DR is a closely related dual comparator that can suit many threshold-detection designs, but it is not automatically equivalent without checking input range, supply limits, output behavior, and device revision. Both families use open-collector outputs and 8-SOIC packaging.
When should I choose LM293DRE4 over LM293DT?
Choose LM293DRE4 when its specific orderable suffix, qualification, marking, or assembly requirements match the intended design. LM293DT is another LM293-family 8-SOIC candidate and may be suitable where the exact electrical and ordering requirements are equivalent. The decision should be based on the manufacturer’s complete part data rather than suffix appearance alone.
Where to buy LM293DRE4 online?
Use the Request a Quote form on this XAIPART page to request LM293DRE4 availability, MOQ, and delivery terms. The form is the appropriate channel for current sourcing information and lets you specify the required reel, tray, or production quantity. Stock status and lead time should be confirmed at quotation time rather than assumed from an outdated catalog listing.
What is the price of LM293DRE4?
Current LM293DRE4 commercial terms are obtained through the Request a Quote form on this page. The structured pricing information on the product page is designed to reflect the exact MPN, quantity breaks, and sourcing channel. Submit the required quantity and packaging details with the quote request for a current response.
What is the lead time for LM293DRE4?
The current lead time for LM293DRE4 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package shipment format, manufacturing status, and destination. Provide the forecast quantities and required delivery dates so the supplier can quote a realistic schedule.
What are the key specifications of LM293DRE4 that engineers should know?
The key LM293DRE4 specifications are two independent differential-comparator channels, open-collector outputs, single- or dual-supply operation, a 36 V maximum tested supply voltage, a 2 V to 36 V supply-rail difference, a common-mode range including ground, and approximately 0.4 mA typical supply-current drain per comparator. The device is packaged in 8-SOIC.

Technische Referenzdaten für LM293DRE4 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LM293DRE4 for a new industrial or control design that specifically calls for the LM293 family, an 8-SOIC footprint, two independent comparator channels, and open-collector outputs. LM293DR, LM293DR2G, and LM293DT are the closest same-family drop-in candidates when the required orderable suffix, marking, qualification, or assembly conditions differ. LM393DR can be considered for a related dual-comparator design, but its device-specific voltage ratings, temperature grade, and qualification details must be checked before substitution. The LM2901N/PB is useful when only one comparator channel is needed, but it is not an 8-SOIC dual-channel substitute. For any candidate, verify pinout, common-mode range, maximum supply voltage, output sink current, input offset, hysteresis behavior, and qualification requirements before production release.

Vergleich mit Alternativen

Parameter Dieses Produkt LM293DR LM293DR2G LM293DT LM393DR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Comparator Configuration Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator
Output Type Open-collector, open-drain Open-collector, open-drain Open-collector, open-drain Open-collector, open-drain Open-collector, open-drain
Supply Configuration Single supply or dual supplies Single supply or dual supplies Single supply or dual supplies Single supply or dual supplies Single supply or dual supplies

Wichtigste Unterscheidungsmerkmale

  • Exact LM293 family positioning (vs. LM393DR)
  • Two independent threshold channels (vs. LM2901N/PB)
  • Ground-inclusive common-mode operation (vs. LM293DT)

Designhinweise

Place the supply bypass capacitor immediately between pin 8 and pin 4, with a short ground return. Route the two comparator input networks away from relay, power-converter, and motor-switching nodes. Input traces are high impedance and can pick up switching noise even when the comparator itself has a wide supply range.

Do not treat the open-collector output as a push-pull logic output. Add a pull-up resistor to each output and ensure its voltage does not exceed the output-pin rating. Also avoid driving the comparator input beyond its common-mode range, particularly when the input divider exceeds the supply rail during fault conditions.

For slowly changing sensor signals, add hysteresis with positive feedback so noise near the threshold does not cause repeated output transitions. Keep the feedback resistor connection short and separate it from high-current output pull-ups. Recalculate the switching point with both the divider resistors and the feedback effect included.

Use a common ground reference for the comparator supply, divider network, and pull-up load. If the open-collector output switches a remote or inductive load, route the higher-current transient path away from the input pins and use appropriate suppression on the load. The logic pull-up should be close enough to the output to minimize loop area.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

TI identifies LM293 as an industrial-grade dual differential comparator. Specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification declarations were not identified for the exact MPN.

Ähnliche Suchanfragen

LM293DRE4 datasheet LM293DRE4 pinout LM293DRE4 datasheet pdf LM293DRE4 equivalent LM293DRE4 replacement LM293DRE4 cross reference LM293DRE4 footprint LM293DRE4 price LM293DRE4 stock Texas Instruments LM293DRE4 LM293DRE4 vs LM293DR LM293DRE4 vs LM393DR LM293DRE4 8-SOIC pinout LM293DRE4 application circuit LM293DRE4 36V comparator

Verwandte Bauteile & Begriffe

Texas Instruments LM293DRE4 LM293 LM293DR LM293DR2G LM293DT LM393DR LM2901N/PB Dual differential comparator Comparator Analog integrated circuit Open-collector output Open-drain output Single-supply operation Dual-supply operation Common-mode input voltage Supply current drain 8-SOIC SOIC package family Surface-mount package Industrial-grade electronics Threshold detection Window comparator TTL compatibility CMOS compatibility
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen