Texas Instruments

LM393BIPWR - Dual 38V Comparator | Texas Instruments

Teilenummer: LM393BIPWR ✓ Aktiv
2 V to 36 V Vdss 3.5 nA Id 8-pin TSSOP (PW) Package
MOQ: 1 |

LM393BIPWR Übersicht

The Texas Instruments LM393BIPWR is a dual differential comparator with open-collector outputs, a 2 V to 36 V supply range, and an 8-pin TSSOP package. Key specifications include a maximum rated voltage of 38 V, input offset voltage of 0.37 mV, input bias current of 3.5 nA, supply current of 200 µA per comparator, and a response time of 1 µs.

A differential comparator is an analog integrated circuit that compares two input voltages and produces a logic-level result indicating which input is higher. The LM393B family contains two independent comparators in one package. Within the power-management IC hierarchy, comparators occupy the interface between continuously varying sensor or analog signals and digital control systems. Their open-collector outputs can pull a logic rail low while permitting an external pull-up resistor to establish the high state.

The LM393B improves several characteristics of the original LM393 family. Its input offset voltage is specified at 0.37 mV, supporting more accurate decisions near the switching threshold. Input bias current of 3.5 nA limits the loading imposed on high-impedance sensors. A 200 µA supply current per comparator suits battery-operated and low-power systems, while the 1 µs response time supports practical control-loop and threshold-monitoring tasks. The common-mode range includes ground, which is important for single-supply sensing near 0 V.

Each comparator can operate from a single supply or split supplies. The differential input range is equal to the maximum-rated supply voltage of ±38 V according to the manufacturer product page. Because the outputs are open collector, two outputs can be tied together to create a wired-AND function. The output structure also provides flexibility for driving TTL, MOS, and CMOS loads when the pull-up supply and resistor are selected correctly.

Typical uses include overvoltage and undervoltage detection, window comparators, temperature sensing, industrial control thresholds, power-supply supervision, and sensor signal conditioning. In a power-supply application, the device can compare a feedback voltage with a reference and control an enable or protection signal. In a sensor interface, low bias current helps preserve the amplitude and accuracy of high-impedance signals. The commercial 0 °C to 85 °C temperature range and TSSOP-8 package suit compact industrial and consumer equipment.

Designers should use a pull-up resistor on each open-collector output, account for output sink-current limits, and ensure that input and output voltages remain within their respective absolute maximum ratings. Decoupling capacitance should be placed close to the supply pin, while sensitive analog inputs require short traces and minimal parasitic coupling. The B version is identified by Texas Instruments as a drop-in replacement for the LM293, LM393, and LM2903 families.

This product page combines manufacturer specifications, package and pin information, sourcing guidance, and application-focused engineering notes to support component selection and PCB implementation. It also distinguishes the commercial LM393BIPWR from temperature-range, family-version, and low-voltage alternatives that may appear in cross-reference searches.

Drop-in-Alternativen für LM393BIPWR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM393BIPWR (gleiche Bauform und Footprint) – abweichend in Comparator Type, Package, Output Type, Supply Current, Differential Input Voltage Range.

Texas Instruments
Comparator Type: Dual general-purpose voltage comparator
Vergleichen mit LM393BIPWR →
Texas Instruments
Output Type: Open collector
Differential Input Voltage Range: ±38 V maximum supply-rated range
Vergleichen mit LM393BIPWR →
Texas Instruments
Comparator Type: Dual differential general-purpose comparator
Package: 8-TSSOP
Vergleichen mit LM393BIPWR →
Texas Instruments
Comparator Type: General-purpose differential comparator
Package: 8-pin TSSOP
Supply Current: 2.5 mA
Vergleichen mit LM393BIPWR →

LM393PWRG3

✅ Drop-In
Texas Instruments
📦 TSSOP-8 (PW)
General-purpose differential comparator · 2 · 2 V to 36 V · ±1 V to ±18 V · Open-collector · Differential · Rail-to-rail · 2.5 mA

Preis auf Anfrage

Datenblatt ansehen →

LM393APWR

✅ Drop-In
Texas Instruments
📦 TSSOP-8 (PW)
Dual differential comparator · Open collector · 2 channels · 38 V · Includes ground; rail-to-rail input · 0.37 mV · 3.5 nA · 200 µA per comparator

Preis auf Anfrage

Datenblatt ansehen →

LM2903BIPWR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 TSSOP-8 (PW)
Dual general-purpose voltage comparator · 2 channels · 2 V to 36 V · 38 V · 0.37 mV · 3.5 nA · 200 µA per comparator · 1 µs

Preis auf Anfrage

Datenblatt ansehen →

LM393BIPWR-Q1

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 TSSOP-8 (PW)
Automotive-qualified ordering option in the same 8-pin TSSOP footprint; operating-temperature qualification differs from the commercial LM393BIPWR

📋 Referenzalternative (nicht im Katalog)

LMV393PWR

✅ Drop-In
📦 TSSOP-8 (PW)
Lower-voltage CMOS alternative in the same 8-pin TSSOP footprint; maximum supply is approximately 5.5 V versus 36 V for LM393BIPWR, limiting use to lower-voltage rails

📋 Referenzalternative (nicht im Katalog)

LM393BIPWR Grenzwerte & elektrische Eigenschaften

Comparator Type Dual differential comparator
Ausgangstyp Open-collector
Number of Comparators 2
Supply Voltage Range 2 V to 36 V
Maximum Rated Voltage 38 V
Differential Input Voltage Range ±38 V
Input Offset Voltage 0.37 mV
Input Bias Current 3.5 nA
Versorgungsstrom 200 µA per comparator
Response Time 1 µs
Common-Mode Input Voltage Range Includes ground
Output Compatibility TTL, MOS, and CMOS
ESD Rating 2 kV HBM
Betriebstemperaturbereich -40 °C to +85 °C
Gehäuse 8-pin TSSOP (PW)
Montageart Surface mount
RoHS Compliance Compliant
MSL-Level MSL 1, 260 °C unlimited

LM393BIPWR Pin-Konfiguration

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Pin 1 OUT1 — Comparator 1 open-collector output
Pin 2 IN1- — Comparator 1 inverting input
Pin 3 IN1+ — Comparator 1 non-inverting input
Pin 4 GND — Ground reference
Pin 5 IN2+ — Comparator 2 non-inverting input
Pin 6 IN2- — Comparator 2 inverting input
Pin 7 OUT2 — Comparator 2 open-collector output
Pin 8 VCC — Positive supply voltage

Typische Anwendungen

LM393BIPWR ist geeignet für 6 Anwendungs: Industrial Overvoltage Detection, Power-Supply Window Monitor, Temperature Sensor Thresholding, Battery-Powered Sensor Interface, Motor and Solenoid Threshold Control, General-Purpose Logic Interface.

🏭

Industrial Overvoltage Detection

The LM393BIPWR suits industrial supply-limit monitoring because one channel can compare a divided feedback voltage with a reference and assert an open-collector fault signal. Its 0.37 mV input offset improves threshold precision, while 3.5 nA input bias current limits loading on the divider. The 1 µs response time detects rail excursions quickly, and the ±38 V differential input range provides additional margin. Add a pull-up resistor on the open-collector output and verify the divider ratio, input common-mode range, and system fault-routing requirements.

⚡

Power-Supply Window Monitor

The two independent comparators in the LM393BIPWR can monitor upper and lower supply thresholds for a window-monitor circuit. Each output uses open-collector wired logic, allowing fault conditions to be combined without adding another logic gate. The 2 V to 36 V supply range covers many 5 V, 12 V, and 24 V industrial rails, while low 200 µA supply current per comparator limits overhead. The design should account for output sink current, pull-up voltage, reference accuracy, and the comparator’s input common-mode limits.

🌡️

Temperature Sensor Thresholding

A temperature-sensor signal can be divided and compared with a voltage reference using one channel of the LM393BIPWR to generate a thermal alarm. The 3.5 nA input bias current is useful when the sensing divider has high impedance, and the 0.37 mV offset helps preserve threshold accuracy. The commercial -40 °C to +85 °C rating covers many industrial ambient conditions. Designers should evaluate sensor slope, hysteresis, resistor tolerances, and whether a pull-up is needed to translate the open-collector result into the alarm logic level.

🔋

Battery-Powered Sensor Interface

The LM393BIPWR can perform low-side threshold detection beside a battery-powered sensor because its supply current is 200 µA per comparator. Ground-referenced sensing is supported because the common-mode input range includes ground, and the 3.5 nA input bias current minimizes disturbance to high-impedance sensor networks. At a 5 V supply, the device can detect charging, discharge, or signal-presence events without continuous conversion. Keep the pull-up and leakage currents low enough that standby demand remains compatible with the battery budget.

🏭

Motor and Solenoid Threshold Control

The LM393BIPWR can compare a scaled motor or solenoid feedback voltage with a command threshold, providing a hardware interlock independent of a software controller. Its 1 µs response time supports rapid transition detection, and the wide differential input rating accommodates signal excursions associated with industrial environments when the individual pin ratings are respected. Use the open-collector output to drive an interlock or protection input through a pull-up. Verify noise immunity, switching transients, grounding, and the load’s current requirements before deployment.

🔧

General-Purpose Logic Interface

The LM393BIPWR can translate a slowly changing analog signal into a CMOS- or TTL-compatible threshold event using an open-collector output and external pull-up. Its 3.5 nA input bias current is beneficial when the driving source has high output impedance, while the 1 µs response time provides clear edge timing for control and monitoring. Select the pull-up rail and resistor to satisfy downstream rise-time and sink-current requirements. The open-collector structure also permits wired-AND connection, simplifying multi-fault aggregation without a dedicated logic package.

What are the key specifications of LM393BIPWR that engineers should know?
The LM393BIPWR is a dual open-collector differential comparator with a 2 V to 36 V supply range, 0.37 mV input offset, 3.5 nA input bias current, 200 µA supply current per comparator, and 1 µs response time. According to the Texas Instruments LM393B product page, the maximum rated voltage is 38 V and the device is offered in an 8-pin TSSOP package for a -40 °C to +85 °C commercial temperature range.
Where can I download the LM393BIPWR datasheet PDF?
The official LM393BIPWR technical information is available through the Texas Instruments LM393 product page at https://www.ti.com/product/LM393. The manufacturer page provides the LM393B family datasheet, ordering information, pin configuration, and parameters for the LM393BIPWR orderable part. Use the package drawing and pin table for the PW 8-pin TSSOP implementation before assigning PCB nets.
Where can I find the LM393BIPWR pinout?
The LM393BIPWR pinout uses the standard dual-comparator LM393 arrangement in an 8-pin TSSOP package: OUT1 is pin 1, IN− is pin 2, IN+ is pin 3, GND is pin 4, IN+ is pin 5, IN− is pin 6, OUT2 is pin 7, and VCC is pin 8. Confirm signal names and package details in the Texas Instruments manufacturer datasheet before finalizing PCB artwork.
Where can I buy LM393BIPWR online?
Use the Request a Quote form on this page to request LM393BIPWR availability, current commercial terms, and an order quotation. The form is the appropriate route for an exact-order sourcing request because the LM393BIPWR is an 8-pin TSSOP, tape-and-reel ordering code. Confirm the complete MPN, package suffix, quantity, and delivery requirements when submitting the request.
What is the price of LM393BIPWR?
Current commercial pricing for LM393BIPWR is obtained through the Request a Quote form on this page. The request should identify the exact 8-pin TSSOP MPN and required quantity so the quotation can reflect the correct suffix, packing format, and delivery terms. Do not substitute a comparator in a different package, because package compatibility affects PCB assembly and pin assignment.
What is the lead time for LM393BIPWR?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, package suffix, production status, and inventory conditions. When requesting a quotation, specify whether the part is required in tape-and-reel packaging and include the intended delivery schedule so the commercial response can be matched to the production plan.
Is LM393BIPWR in stock?
Use the Request a Quote form on this page to check current LM393BIPWR stock and order status. Include the exact MPN, target quantity, and packing requirement in the request. The manufacturer lists the LM393B product family as active, but real-time allocation should be confirmed for the complete LM393BIPWR orderable code rather than inferred from family-level availability.
What is the difference between LM393BIPWR and LM393PWR?
The principal difference is the B-version specification level rather than the comparator function. The manufacturer describes the B version as improved, with up to a 38 V maximum rating, 0.37 mV low input offset, 3.5 nA low input bias current, 200 µA supply current per comparator, and 1 µs response time. Both orderable parts use an 8-pin TSSOP footprint, but final qualification should confirm the exact suffix and temperature requirements.
What is the difference between LM393BIPWR and LM2903BIPWR?
LM393BIPWR and LM2903BIPWR use the same dual open-collector comparator architecture and 8-pin TSSOP footprint, but they target different commercial temperature ranges. The LM393BIPWR is specified for -40 °C to +85 °C. The LM2903 family is intended for a different temperature qualification, so choose according to the full operating-temperature requirements of the equipment rather than package appearance alone.
When should I choose LM393BIPWR over LM393PWR?
Choose LM393BIPWR when the design benefits from the improved B-version offset, bias-current, supply-current, and response-time characteristics or when standardization on the LM393B family is required. Choose the original LM393PWR when an existing qualified bill of materials specifies it and its electrical limits satisfy the application. Confirm the exact manufacturer suffix because lifecycle and ordering conditions can differ between revisions.
Is LM393BIPWR suitable for low-voltage sensor interfaces?
The LM393BIPWR is suitable for many low-voltage sensor-threshold interfaces because its input bias current is 3.5 nA and its common-mode input range includes ground. Its 2 V minimum supply supports 3 V and 5 V systems. For designs operating below 2 V, or requiring substantially lower power, evaluate a modern low-voltage comparator instead of assuming that the classic bipolar LM393 architecture is electrically interchangeable.
What can replace LM393BIPWR without changing the PCB?
A PCB-compatible replacement must use the same 8-pin TSSOP footprint, preserve the standard LM393 pin assignments, provide dual open-collector outputs, and remain within the required supply, timing, offset, and temperature limits. Potential options include LM393PWR, LM393APWR, LM2903BIPWR, and selected LMV393-family devices, but each candidate requires verification against the specific input common-mode range, output pull-up arrangement, and qualification requirements.
What is the best LMV393 equivalent for LM393BIPWR?
The LMV393 can be considered for some 5 V applications because it offers lower supply current and a low-voltage design, but it is not automatically interchangeable across every LM393BIPWR operating condition. Its lower voltage range and different input/output characteristics must fit the actual supply rail, common-mode signals, pull-up logic, and timing requirements. Use the LM393BIPWR when preserving the full 2 V to 36 V operating envelope is essential.
Can LM393BIPWR replace LM293 or LM2903 in an existing design?
Texas Instruments identifies the B version as a drop-in replacement for the LM293, LM393, and LM2903 families, including the LM393BIPWR commercial-grade orderable part. Drop-in qualification still requires the same package, pin assignment, output topology, and acceptable electrical limits. Verify the package suffix, temperature range, supply conditions, and output pull-up network before approving a production substitution.
Does the LM393BIPWR open-collector output need a pull-up resistor?
Yes, each LM393BIPWR open-collector output requires an external pull-up resistor to establish its high logic state. The resistor connects the output to the appropriate logic supply, and its value must satisfy the output sink-current limit, rise-time requirement, and downstream input leakage. Two open-collector outputs may also be connected together for a wired-AND function when the resulting sink-current and pull-up design remain valid.
How should LM393BIPWR be used in a power-supply overvoltage detector?
Place one LM393BIPWR channel across a divided output-voltage signal and a stable threshold reference so the comparator changes state when the monitored rail exceeds its limit. Add an appropriate output pull-up because the output is open collector. Account for the 0.37 mV input offset, 3.5 nA bias current, 1 µs response time, and any divider impedance; these values determine threshold accuracy, loading, and detection delay.

Technische Referenzdaten für LM393BIPWR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LM393BIPWR for commercial 8-pin TSSOP designs that require two open-collector comparators, a wide 2 V to 36 V supply range, 0.37 mV input offset, 3.5 nA input bias current, and a 1 µs response time. LM393PWR is appropriate when an existing original-version LM393 design is already qualified, while LM393APWR provides another original-family option with a documented drop-in relationship. Select LM2903BIPWR when its temperature qualification better matches the product, and use LM393BIPWR-Q1 when automotive qualification is required. LMV393PWR is attractive for restricted low-voltage, low-power systems, but its much lower maximum supply voltage makes it unsuitable as a universal replacement. For every option, verify the exact TSSOP pinout, open-collector pull-up circuit, common-mode range, timing, and temperature grade before releasing production artwork.

Vergleich mit Alternativen

Parameter Dieses Produkt LM393PWR LM393APWR LM2903BIPWR LM393BIPWR-Q1 LMV393PWR
Package TSSOP-8 (PW) TSSOP-8 (PW) TSSOP-8 (PW) TSSOP-8 (PW) TSSOP-8 (PW) TSSOP-8 (PW)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Comparator Count 2 2 2 2 2 2
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector

Wichtigste Unterscheidungsmerkmale

  • Improved B-version threshold accuracy (vs. LM393PWR)
  • Low loading for high-impedance sensing (vs. LM393APWR)
  • Higher supply-voltage headroom than LMV393 (vs. LMV393PWR)

Designhinweise

Every open-collector output requires an external pull-up resistor. Omitting the pull-up leaves the output unable to establish a valid high state. Select the pull-up supply to remain within the downstream device’s logic limits, and size the resistor for both the comparator sink-current rating and the required rise time. Two outputs may be tied together for wired-AND operation, but their combined sink current must not exceed the device rating.

Place the supply bypass capacitor close to pin 8 and route it to the ground reference with a short, low-impedance path. Keep the two inverting and two non-inverting input nets away from switching nodes and high-current return paths. Because the inputs are sensitive to small differential signals, use a quiet ground reference and avoid routing copper beneath the analog inputs where coupling could cause false threshold transitions.

Estimated: comparator supply dissipation is approximately 200 µA per comparator multiplied by the supply voltage, before input-output conduction loss and output sinking. At a 5 V supply, the two-channel supply-current contribution is about 1 mA, or 5 mW. Actual device dissipation also depends on output current because the open collector dissipates energy while sinking the pull-up current, so include that term when evaluating long-duration high-duty-cycle operation.

Do not treat the 38 V maximum rating as a recommended operating supply. The specified operating supply range is 2 V to 36 V, and the differential input range is ±38 V. Input common-mode and output voltages have separate constraints. Verify absolute-maximum conditions during fault analysis, including supply transients and input shorts, while maintaining normal operation within the recommended electrical limits.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Yes
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer and product information identify the LM393BIPWR as RoHS compliant and RoHS3 compliant, with MSL 1 at 260 °C unlimited. Automotive qualification is not stated for the commercial LM393BIPWR.

Daten verifiziert am: 2026-11-17 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

LM393BIPWR datasheet LM393BIPWR pinout LM393BIPWR datasheet pdf LM393BIPWR specifications LM393BIPWR price LM393BIPWR stock Texas Instruments LM393BIPWR LM393BIPWR TSSOP-8 pinout LM393BIPWR drop-in replacement LM393BIPWR vs LM393PWR LM393BIPWR equivalent LM393BIPWR application circuit

Verwandte Bauteile & Begriffe

Texas Instruments LM393BIPWR LM393B LM393PWR LM393APWR LM2903BIPWR LM393BIPWR-Q1 LMV393PWR dual differential comparator comparator analog comparator open-collector output power management IC semiconductor TSSOP-8 PW package surface mount SMD input offset voltage input bias current supply current response time common-mode input voltage TTL CMOS MOS RoHS MSL 1 industrial control power-supply supervision
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen