Analog Devices

MAX3243ECUI+ 3V 5.5V 250kbps RS-232 Transceiver | ADI

Teilenummer: MAX3243ECUI+ ✓ Aktiv
3.0 V to 5.5 V Vdss Up to 1 A Id 28-pin TSSOP Package
MOQ: 1 |

MAX3243ECUI+ Übersicht

Analog Devices MAX3243ECUI+ is a 3-to-5.5 V RS-232 transceiver with three transmitter channels, five receiver channels, 250 kbps data rate, ±15 kV ESD protection, and automatic shutdown in a 28-pin TSSOP package. The part is designed for equipment that requires multiple RS-232 ports while operating from either 3 V or 5.5 V supplies.

An RS-232 transceiver is a line-driver and line-receiver interface IC that converts low-voltage digital logic signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. In the interface hierarchy, the MAX3243ECUI+ belongs to the communication-interface IC family, combining RS-232 drivers and receivers with low-voltage digital support and protected external connections.

Key electrical features include operation from 3.0 V to 5.5 V, a maximum data rate of 250 kbps, and ±15 kV ESD protection on the serial interfaces. Automatic shutdown reduces supply consumption when the associated RS-232 links are inactive, while the complementary always-active receiver supports continuous monitoring. The 28-pin TSSOP package provides a compact surface-mount footprint for industrial control, communications, instrumentation, and embedded equipment.

The three drivers accommodate outbound serial connections, while five receivers provide additional inbound monitoring channels. This asymmetric 3/5 arrangement is useful in systems where several remote devices report status to one controller while the controller drives a smaller number of commands. The 250 kbps maximum data rate supports moderate-speed point-to-point serial links and legacy peripheral communication.

Typical uses include industrial controllers, data-acquisition equipment, POS terminals, test systems, and service interfaces. In an industrial controller, the device can connect a local processor to multiple RS-232 sensors or service ports while its ESD-protected lines improve resilience to electrostatic discharge encountered during installation and maintenance.

PCB design should place the device close to its RS-232 connector and route driver and receiver traces away from clocks, switching regulators, and high-speed digital signals. Confirm that connector-side protection and grounding provide the intended surge and ESD path, and follow the manufacturer datasheet for recommended charge-pump capacitors and layout.

This page combines the manufacturer specifications, package details, engineering applications, drop-in alternatives, comparison parameters, and practical design guidance to help engineers evaluate the MAX3243ECUI+ for new and existing RS-232 designs.

Drop-in-Alternativen für MAX3243ECUI+ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX3243ECUI+ (gleiche Bauform und Footprint) – abweichend in Maximum Data Rate, Supply Voltage Range, ESD Protection, Interface Standard, Product Type.

Analog Devices
Interface Standard: RS-232
Vergleichen mit MAX3243ECUI+ →
Analog Devices
Maximum Data Rate: 250kbps
Supply Voltage Range: 3.0V to 5.5V
ESD Protection: ±15kV HBM
Vergleichen mit MAX3243ECUI+ →
Texas Instruments
Maximum Data Rate: 500 kbps
Supply Voltage Range: 3 V to 5.5 V
Vergleichen mit MAX3243ECUI+ →
Analog Devices
Maximum Data Rate: 250kbps
Supply Voltage Range: 3.0V to 5.5V
ESD Protection: ±15kV
Vergleichen mit MAX3243ECUI+ →

MAX3243EEUI+T

✅ Drop-In
Analog Devices
📦 28-pin TSSOP
RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 drivers · 5 receivers · Full duplex · ±15kV · 1µA

Preis auf Anfrage

Datenblatt ansehen →

MAX3243ECAI+T

✅ Drop-In
Analog Devices
📦 28-pin TSSOP
RS-232 line driver and receiver transceiver · 3 drivers · 5 receivers · 3.0V to 5.5V · 250kbps · ±15kV HBM · 1µA · Dual charge pump

Preis auf Anfrage

Datenblatt ansehen →

MAX3243CUI+

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Analog Devices
📦 28-pin TSSOP
3.0 V to 5.5 V · 250 kbps · ±15 kV · 3 drivers · 5 receivers · 1 µA · 28-pin TSSOP · 3/5 full-duplex configuration

Preis auf Anfrage

Datenblatt ansehen →

MAX3243ECPWR

✅ Drop-In
Texas Instruments
📦 28-pin TSSOP
3/5 multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 500 kbps · 3 · 5 · 2 · ±15 kV · ±8 kV

Preis auf Anfrage

Datenblatt ansehen →

ICL3243ECVZA

✅ Drop-In
📦 28-pin TSSOP
RS-232 channel count and 250 kbps data rate remain unchanged at 3/5 channels and 0% rated-rate difference; cross-brand supply, shutdown, and logic-level details require verification.

📋 Referenzalternative (nicht im Katalog)

MAX3243ECUI+ Technische Daten

Product Type Multichannel RS-232 transceiver
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 250 kbps
Transmitter Channels 3 channels
Receiver Channels 5 channels
Complementary Always-Active Receiver 1 receiver
Transmitter Output Current Up to 1 A
ESD Protection ±15 kV
Shutdown Supply Current 1 µA
Automatic Shutdown Yes
Automatic Wake-Up Yes
Communication Standard EIA/TIA-232
Interface Standard V.28 and V.24
Gehäuse 28-pin TSSOP
Montageart Surface mount
RoHS-Status Compliant

MAX3243ECUI+ 28-pin tssop Pinbelegungsleitfaden

Pinbelegung für MAX3243ECUI+ (28-pin tssop-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX3243ECUI+ im 28-pin tssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX3243ECUI+.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX3243ECUI+ ist geeignet für 6 Anwendungs: Industrial Controller Communication, Data-Acquisition Equipment, Point-of-Sale Terminal, Test and Measurement Instrument, Maintenance and Service Console, Portable Diagnostic Equipment.

🏭

Industrial Controller Communication

The MAX3243ECUI+ fits industrial controllers that need several RS-232 service or command links while accepting status reports from more peripherals than they drive. Its three transmitters and five receivers provide asymmetric connectivity, while the 250 kbps rate suits moderate-speed protocols. The 3.0-to-5.5 V supply range allows use beside either 3 V or 5 V logic. Automatic shutdown lowers consumption during idle periods, while ±15 kV ESD protection strengthens the external interface against electrostatic discharge. Place the transceiver near the connector and maintain clean return paths to reduce noise pickup.

📊

Data-Acquisition Equipment

Data-acquisition systems often combine command outputs with a greater number of sensor or instrument response inputs, matching the MAX3243ECUI+ configuration of three drivers and five receivers. Its 250 kbps maximum rate is suitable for many legacy RS-232 instruments and low-to-moderate-speed acquisition modules. Operation from 3.0 V to 5.5 V simplifies interface design across portable and bench-top equipment. The automatic shutdown function reduces standby demand, and the protected external pins improve reliability around user-accessible connectors where electrostatic discharge is likely.

🖥️

Point-of-Sale Terminal

A point-of-sale terminal can use the MAX3243ECUI+ to consolidate printer, customer-display, payment-accessory, and service connections that use RS-232. Three driver outputs support outbound commands or control signals, while five receiver inputs support incoming peripheral status. The 250 kbps rate is appropriate for many POS transactions that do not require continuous high-bandwidth transfer. A 3.0-to-5.5 V operating range accommodates compact embedded systems, and automatic shutdown helps control power use when peripherals are idle. Connector-side grounding and external surge protection should complement the IC's ±15 kV ESD rating.

🔧

Test and Measurement Instrument

The MAX3243ECUI+ is useful in test and measurement equipment that needs several RS-232 control and monitoring ports in a compact board area. The five receiver channels can monitor multiple instrument or fixture status lines, while three transmitters provide command outputs. Its 250 kbps data rate supports typical legacy serial-control protocols, and the 3.0-to-5.5 V supply range simplifies interface selection across portable and laboratory products. Automatic shutdown is beneficial in battery-powered instruments. For laboratory environments, keep external cabling away from sensitive traces and follow the manufacturer layout guidance for charge-pump components.

🔌

Maintenance and Service Console

The MAX3243ECUI+ can support service-oriented equipment with one controller connection and several monitored remote modules. Its three transmitters handle commands from the main controller, while five receivers accept module reports, fault flags, or acknowledgments. The ±15 kV ESD rating is especially relevant for service ports that may be connected and disconnected by operators. Automatic shutdown reduces consumption when no remote link is active, and the 250 kbps rate is adequate for many configuration and diagnostic protocols. The interface still requires an appropriate connector shield, ground reference, and external protection strategy for the installation environment.

📱

Portable Diagnostic Equipment

Portable diagnostic equipment benefits from the MAX3243ECUI+ because it supports 3.0-to-5.5 V operation and automatically reduces consumption when communication is inactive. The three transmitters can address attached systems, while the five receivers can collect status from several probes or adapters. At a maximum 250 kbps, the device suits status, configuration, and moderate-volume data transfers rather than continuous high-speed file transfer. The compact 28-pin TSSOP package conserves board area, and the protected RS-232 pins add resilience when the product is used with external equipment. Power budgeting should include the active and shutdown consumption of the final system configuration.

What is the MAX3243ECUI+?
The MAX3243ECUI+ is a 3-to-5.5 V, multichannel RS-232 transceiver containing three transmitters and five receivers in a 28-pin TSSOP package. According to the Analog Devices MAX3243 datasheet, it supports data rates up to 250 kbps, automatic shutdown and wake-up, and ±15 kV ESD protection. The five receiver channels are useful when a system must monitor more incoming signals than it transmits.
What are the key specifications of MAX3243ECUI+ that engineers should know?
The MAX3243ECUI+ combines three RS-232 drivers, five receivers, a complementary always-active receiver, 3.0-to-5.5 V operation, and a maximum 250 kbps data rate. According to the Analog Devices MAX3243 datasheet, its transmitter and receiver inputs provide ±15 kV ESD protection. The device also uses automatic shutdown to lower consumption when the communication links are inactive and is housed in a 28-pin TSSOP package.
What is the operating voltage of MAX3243ECUI+?
The MAX3243ECUI+ operates from 3.0 V to 5.5 V, allowing it to interface with both 3 V and 5 V system logic. According to the Analog Devices MAX3243 datasheet, this supply range supports the MAX3221E, MAX3223E, and MAX3243E family of low-voltage RS-232 communications interfaces. The supply and ground connections should be decoupled following the capacitor recommendations in the manufacturer datasheet.
How many RS-232 drivers and receivers does MAX3243ECUI+ have?
The MAX3243ECUI+ has three RS-232 transmitters and five receivers, plus one complementary always-active receiver for external monitoring. According to the Analog Devices MAX3243 product page, this 3/5 arrangement is intended for systems with more incoming channels than outgoing channels. The always-active receiver remains available while the automatic shutdown circuitry reduces power consumption.
Where can I download the MAX3243ECUI+ datasheet PDF?
The official MAX3243 documentation is available through the Analog Devices product page linked on this page. The manufacturer datasheet contains the complete electrical characteristics, pin descriptions, charge-pump capacitor requirements, interface standards, and recommended layout. Search for the MAX3243ECUI+ ordering information on the official MAX3243 page to identify the exact 28-pin TSSOP configuration before releasing a PCB design.
Where can I find the MAX3243ECUI+ pinout?
The MAX3243ECUI+ pinout is defined by the pin-description table in the Analog Devices MAX3243 manufacturer datasheet. Use that table when assigning the three driver outputs, five receiver inputs, complementary receiver, charge-pump nodes, enable control, and supply pins in the 28-pin TSSOP footprint. The package drawing and land pattern should be taken directly from the same document so numbering and exposed pad requirements remain consistent.
What is the maximum data rate of MAX3243ECUI+?
The MAX3243ECUI+ supports RS-232 data rates up to 250 kbps. According to the Analog Devices MAX3243 datasheet, this rate makes the device suitable for moderate-speed serial equipment, industrial controllers, service ports, and data-acquisition links. The actual channel rate must remain compatible with the RS-232 receiver bandwidth, cable characteristics, grounding arrangement, and the protocol implemented by the connected system.
What ESD protection does MAX3243ECUI+ provide?
The MAX3243ECUI+ provides ±15 kV ESD protection on the transmitter outputs and receiver inputs. According to the Analog Devices MAX3243 documentation, the enhanced protection is intended for exposed communications connectors and improves tolerance during installation and maintenance. The IC protection rating does not replace correctly selected external surge protection, proper connector grounding, or a compliant enclosure design.
What can replace the MAX3243ECUI+?
The MAX3243EEUI+T is a same-family option for designs that need the same MAX3243 3/5-channel RS-232 architecture in a 28-pin TSSOP footprint, while the MAX3243ECAI+T provides another temperature-grade configuration. Before replacing the MAX3243ECUI+, verify supply voltage, data rate, ESD rating, temperature range, shutdown behavior, and pin names against the manufacturer datasheet. Board changes are not expected when the electrical ratings and pin assignments match.
Is MAX3243ECUI+ the same as ICL3243ECVZA?
The ICL3243ECVZA is a cross-brand candidate that should not be treated as automatically interchangeable with the MAX3243ECUI+. It is associated with the same 28-pin RS-232 transceiver class, but supply thresholds, shutdown timing, receiver behavior, logic levels, and absolute maximum ratings must be compared before use. Only approve it as a drop-in replacement after checking its manufacturer datasheet against every MAX3243ECUI+ requirement and confirming the footprint.
When should I choose MAX3243ECUI+ over a single-channel RS-232 transceiver?
Choose the MAX3243ECUI+ when the design needs three outbound RS-232 drivers and five inbound receivers rather than isolated point-to-point channels. Its 250 kbps limit, 3.0-to-5.5 V supply range, and ±15 kV ESD protection suit compact multiport equipment. A single-channel device may be preferable when connector count is low, board area is severely constrained, or each port requires independent supply and isolation.
When should I choose MAX3243ECUI+ over MAX3243ECAI+T?
Choose MAX3243ECUI+ when its specified operating-temperature range and environmental requirements satisfy the target equipment. MAX3243ECAI+T is another 28-pin SSOP/TSSOP-family choice identified for the MAX3243 3/5 RS-232 architecture, but its temperature grade and ordering details must govern the decision. Compare minimum and maximum operating temperatures, package dimensions, pin compatibility, and qualification needs before substituting it.
Where can I buy MAX3243ECUI+ online?
Use the Request a Quote form on this page to ask for MAX3243ECUI+ availability, current lead time, minimum order quantity, and delivery options. The requested configuration is the 3-to-5.5 V, 3/5-channel RS-232 transceiver in a 28-pin TSSOP package. Include the target quantity and any reel, tube, or tray requirement in the quote request so the order can be matched to the required manufacturing format.
What is the lead time for MAX3243ECUI+?
The current lead time for MAX3243ECUI+ should be confirmed through the Request a Quote form on this page. Lead time can change with order quantity, production schedule, and the required delivery method, so no fixed interval should be assumed. Provide the annual and build quantities, assembly schedule, and acceptable packing format when requesting the quotation.
Is MAX3243ECUI+ in stock?
Request current MAX3243ECUI+ stock status through the Request a Quote form on this page. Availability can vary by order quantity and fulfillment schedule, so the purchasing team should confirm the allocation before committing the production schedule. State the required package quantity and estimated consumption in the request for the most useful response.
MAX3243ECUI+ vs MAX3243EEUI+T — which is better for an industrial controller?
MAX3243ECUI+ and MAX3243EEUI+T belong to the same 3/5-channel, 28-pin MAX3243-family architecture and support operation from 3.0 V to 5.5 V with 250 kbps data rates. For an industrial controller, select the version whose documented operating-temperature range, ESD rating, shutdown timing, and qualification requirements match the enclosure environment. The ordering suffix and temperature grade, rather than channel count, are the decisive selection factors.

Technische Referenzdaten für MAX3243ECUI+ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MAX3243ECUI+ for compact systems needing three RS-232 transmitters, five receivers, one always-active monitoring receiver, 250 kbps operation, and 3.0-to-5.5 V supply. MAX3243EEUI+T and MAX3243ECAI+T are appropriate when their documented temperature grades better match the deployment environment. MAX3243CUI+ may suit another temperature configuration after full electrical comparison. MAX3243ECPWR can serve designs requiring a different ordering or packing format within the same MAX3243 family. ICL3243ECVZA is a cross-brand option only after verifying supply thresholds, logic levels, shutdown timing, receiver thresholds, ESD ratings, and absolute maximum ratings. For designs with only one driver and one receiver, MAX232EIDR is simpler; for two drivers and two receivers, MAX3232ECDR may reduce size. Regardless of replacement, verify the 28-pin footprint, pin assignments, external capacitor requirements, and operating temperature.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX3243EEUI+T MAX3243ECAI+T MAX3243CUI+ MAX3243ECPWR ICL3243ECVZA
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Renesas Electronics
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP

Wichtigste Unterscheidungsmerkmale

  • More receiver channels than typical dual-driver dual-receiver transceivers (vs. MAX232EIDR)
  • Three transmitters support multi-command equipment (vs. MAX3232ECDR)
  • 250 kbps rate supports moderate-speed RS-232 links (vs. MAX3243ECPWR)

Designhinweise

Place the MAX3243ECUI+ close to the RS-232 connector so protected transceiver pins connect to the connector through short, direct routes. Keep the charge-pump capacitors and the IC close together, and route charge-pump nets away from receiver inputs and sensitive analog traces. Follow the Analog Devices MAX3243 datasheet for the exact capacitor values, pin placement, and ground reference. The 28-pin TSSOP land pattern must follow the manufacturer package drawing.

Do not treat the ±15 kV ESD rating as a complete external surge-protection solution. The rating describes the IC's internal electrostatic-discharge tolerance and does not specify the entire connector-to-ground path. Add suitable external protection when cables can extend beyond the enclosure or connect to unknown equipment, and verify that the selected protection does not distort RS-232 thresholds or transition behavior at 250 kbps.

Separate the MAX3243ECUI+ RS-232 routing from clocks, switching-regulator nodes, relay contacts, and high-speed digital signals. Preserve a continuous signal-ground reference between the transceiver and connector, avoid long stubs, and keep protected interface traces away from noisy power-conversion components. These practices reduce common-mode noise, ground bounce, and unintended data errors in systems with several external cables.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

RoHS compliance is identified for the MAX3243 family. No specific AEC-Q100 qualification, REACH declaration, halogen-free designation, or conflict-minerals statement is established for the exact ordering code.

Ähnliche Suchanfragen

MAX3243ECUI+ datasheet MAX3243ECUI+ pinout MAX3243ECUI+ datasheet pdf MAX3243ECUI+ equivalent MAX3243ECUI+ replacement MAX3243ECUI+ price MAX3243ECUI+ stock Analog Devices MAX3243ECUI+ MAX3243ECUI+ 28-TSSOP pinout MAX3243ECUI+ application circuit MAX3243ECUI+ vs MAX3243ECPWR MAX3243ECUI+ 250kbps RS-232

Verwandte Bauteile & Begriffe

Analog Devices MAX3243ECUI+ MAX3243EEUI+T MAX3243ECAI+T MAX3243CUI+ MAX3243ECPWR ICL3243ECVZA RS-232 transceiver line driver line receiver communication interface IC EIA/TIA-232 V.28 V.24 automatic shutdown automatic wake-up 250 kbps ±15 kV ESD protection 3.0 V to 5.5 V supply 28-pin TSSOP TSSOP package family surface-mount package industrial control data-acquisition equipment point-of-sale terminal
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen