MAX3243ECUI+ 3V 5.5V 250kbps RS-232 Transceiver | ADI
部品番号: MAX3243ECUI+ ✓ 生産中MAX3243ECUI+ 概要
An RS-232 transceiver is a line-driver and line-receiver interface IC that converts low-voltage digital logic signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. In the interface hierarchy, the MAX3243ECUI+ belongs to the communication-interface IC family, combining RS-232 drivers and receivers with low-voltage digital support and protected external connections.
Key electrical features include operation from 3.0 V to 5.5 V, a maximum data rate of 250 kbps, and ±15 kV ESD protection on the serial interfaces. Automatic shutdown reduces supply consumption when the associated RS-232 links are inactive, while the complementary always-active receiver supports continuous monitoring. The 28-pin TSSOP package provides a compact surface-mount footprint for industrial control, communications, instrumentation, and embedded equipment.
The three drivers accommodate outbound serial connections, while five receivers provide additional inbound monitoring channels. This asymmetric 3/5 arrangement is useful in systems where several remote devices report status to one controller while the controller drives a smaller number of commands. The 250 kbps maximum data rate supports moderate-speed point-to-point serial links and legacy peripheral communication.
Typical uses include industrial controllers, data-acquisition equipment, POS terminals, test systems, and service interfaces. In an industrial controller, the device can connect a local processor to multiple RS-232 sensors or service ports while its ESD-protected lines improve resilience to electrostatic discharge encountered during installation and maintenance.
PCB design should place the device close to its RS-232 connector and route driver and receiver traces away from clocks, switching regulators, and high-speed digital signals. Confirm that connector-side protection and grounding provide the intended surge and ESD path, and follow the manufacturer datasheet for recommended charge-pump capacitors and layout.
This page combines the manufacturer specifications, package details, engineering applications, drop-in alternatives, comparison parameters, and practical design guidance to help engineers evaluate the MAX3243ECUI+ for new and existing RS-232 designs.
ドロップイン代替品: MAX3243ECUI+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX3243ECUI+ (同一形状・フットプリント) — 相違点: Maximum Data Rate, Supply Voltage Range, ESD Protection, Interface Standard, Product Type.
MAX3243EEUI+T
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3243ECAI+T
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3243CUI+
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MAX3243ECPWR
✅ ドロップイン価格はお問い合わせください
データシートを見る →ICL3243ECVZA
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MAX3243ECUI+ 仕様
| Product Type | Multichannel RS-232 transceiver |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Transmitter Channels | 3 channels |
| Receiver Channels | 5 channels |
| Complementary Always-Active Receiver | 1 receiver |
| Transmitter Output Current | Up to 1 A |
| ESD Protection | ±15 kV |
| Shutdown Supply Current | 1 µA |
| Automatic Shutdown | Yes |
| Automatic Wake-Up | Yes |
| Communication Standard | EIA/TIA-232 |
| Interface Standard | V.28 and V.24 |
| パッケージ | 28-pin TSSOP |
| 実装タイプ | Surface mount |
| RoHS ステータス | Compliant |
MAX3243ECUI+ 28-pin tssop ピン配置ガイド
MAX3243ECUI+ (28-pin tssop パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX3243ECUI+.
詳細は データシート をご参照ください。
主な用途
MAX3243ECUI+ の用途: 6 件s: Industrial Controller Communication, Data-Acquisition Equipment, Point-of-Sale Terminal, Test and Measurement Instrument, Maintenance and Service Console, Portable Diagnostic Equipment.
Industrial Controller Communication
The MAX3243ECUI+ fits industrial controllers that need several RS-232 service or command links while accepting status reports from more peripherals than they drive. Its three transmitters and five receivers provide asymmetric connectivity, while the 250 kbps rate suits moderate-speed protocols. The 3.0-to-5.5 V supply range allows use beside either 3 V or 5 V logic. Automatic shutdown lowers consumption during idle periods, while ±15 kV ESD protection strengthens the external interface against electrostatic discharge. Place the transceiver near the connector and maintain clean return paths to reduce noise pickup.
おすすめ
Data-Acquisition Equipment
Data-acquisition systems often combine command outputs with a greater number of sensor or instrument response inputs, matching the MAX3243ECUI+ configuration of three drivers and five receivers. Its 250 kbps maximum rate is suitable for many legacy RS-232 instruments and low-to-moderate-speed acquisition modules. Operation from 3.0 V to 5.5 V simplifies interface design across portable and bench-top equipment. The automatic shutdown function reduces standby demand, and the protected external pins improve reliability around user-accessible connectors where electrostatic discharge is likely.
おすすめ
Point-of-Sale Terminal
A point-of-sale terminal can use the MAX3243ECUI+ to consolidate printer, customer-display, payment-accessory, and service connections that use RS-232. Three driver outputs support outbound commands or control signals, while five receiver inputs support incoming peripheral status. The 250 kbps rate is appropriate for many POS transactions that do not require continuous high-bandwidth transfer. A 3.0-to-5.5 V operating range accommodates compact embedded systems, and automatic shutdown helps control power use when peripherals are idle. Connector-side grounding and external surge protection should complement the IC's ±15 kV ESD rating.
おすすめ
Test and Measurement Instrument
The MAX3243ECUI+ is useful in test and measurement equipment that needs several RS-232 control and monitoring ports in a compact board area. The five receiver channels can monitor multiple instrument or fixture status lines, while three transmitters provide command outputs. Its 250 kbps data rate supports typical legacy serial-control protocols, and the 3.0-to-5.5 V supply range simplifies interface selection across portable and laboratory products. Automatic shutdown is beneficial in battery-powered instruments. For laboratory environments, keep external cabling away from sensitive traces and follow the manufacturer layout guidance for charge-pump components.
おすすめ
Maintenance and Service Console
The MAX3243ECUI+ can support service-oriented equipment with one controller connection and several monitored remote modules. Its three transmitters handle commands from the main controller, while five receivers accept module reports, fault flags, or acknowledgments. The ±15 kV ESD rating is especially relevant for service ports that may be connected and disconnected by operators. Automatic shutdown reduces consumption when no remote link is active, and the 250 kbps rate is adequate for many configuration and diagnostic protocols. The interface still requires an appropriate connector shield, ground reference, and external protection strategy for the installation environment.
おすすめ
Portable Diagnostic Equipment
Portable diagnostic equipment benefits from the MAX3243ECUI+ because it supports 3.0-to-5.5 V operation and automatically reduces consumption when communication is inactive. The three transmitters can address attached systems, while the five receivers can collect status from several probes or adapters. At a maximum 250 kbps, the device suits status, configuration, and moderate-volume data transfers rather than continuous high-speed file transfer. The compact 28-pin TSSOP package conserves board area, and the protected RS-232 pins add resilience when the product is used with external equipment. Power budgeting should include the active and shutdown consumption of the final system configuration.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX3243ECUI+ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX3243EEUI+T | MAX3243ECAI+T | MAX3243CUI+ | MAX3243ECPWR | ICL3243ECVZA |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Renesas Electronics |
| Package | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP |
主な差別化要因
- More receiver channels than typical dual-driver dual-receiver transceivers (vs MAX232EIDR)
- Three transmitters support multi-command equipment (vs MAX3232ECDR)
- 250 kbps rate supports moderate-speed RS-232 links (vs MAX3243ECPWR)
設計ノート
Place the MAX3243ECUI+ close to the RS-232 connector so protected transceiver pins connect to the connector through short, direct routes. Keep the charge-pump capacitors and the IC close together, and route charge-pump nets away from receiver inputs and sensitive analog traces. Follow the Analog Devices MAX3243 datasheet for the exact capacitor values, pin placement, and ground reference. The 28-pin TSSOP land pattern must follow the manufacturer package drawing.
Do not treat the ±15 kV ESD rating as a complete external surge-protection solution. The rating describes the IC's internal electrostatic-discharge tolerance and does not specify the entire connector-to-ground path. Add suitable external protection when cables can extend beyond the enclosure or connect to unknown equipment, and verify that the selected protection does not distort RS-232 thresholds or transition behavior at 250 kbps.
Separate the MAX3243ECUI+ RS-232 routing from clocks, switching-regulator nodes, relay contacts, and high-speed digital signals. Preserve a continuous signal-ground reference between the transceiver and connector, avoid long stubs, and keep protected interface traces away from noisy power-conversion components. These practices reduce common-mode noise, ground bounce, and unintended data errors in systems with several external cables.
コンプライアンス情報
RoHS compliance is identified for the MAX3243 family. No specific AEC-Q100 qualification, REACH declaration, halogen-free designation, or conflict-minerals statement is established for the exact ordering code.