Microchip Technology

MCP3422A3-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC

Teilenummer: MCP3422A3-E/SN ✓ Aktiv
2.048 V Vdss 8-pin SOIC Package
MOQ: 1 |

MCP3422A3-E/SN Übersicht

The Microchip Technology MCP3422A3-E/SN is an 18-bit, dual-channel, sigma-delta analog-to-digital converter with differential inputs, a 3.75-sample-per-second conversion rate, and an 8-pin SOIC package. Its integrated 2.048 V precision reference supports a differential input range of ±2.048 V, while the I²C-compatible interface simplifies connection to embedded controllers.

A sigma-delta ADC is a voltage regulator that is designed for high-resolution measurement. In this architecture, the analog input is continuously sampled and converted through noise shaping and digital filtering before being transferred over a serial interface. Within the signal-chain hierarchy, the MCP3422A3-E/SN is an ADC, a data-acquisition IC, and ultimately a signal-conditioning and measurement component.

The converter combines two differential measurement channels with up to 18 bits of resolution. Low-noise delta-sigma conversion is particularly useful when the target signal changes slowly and the required performance emphasizes resolution, linearity, and noise performance rather than high sampling bandwidth. The integrated precision reference removes the need for an external reference supply, helping simplify instrument design and preserve measurement consistency.

The MCP3422A3-E/SN uses a two-wire I²C-compatible serial interface and operates from a single supply in the 2.7 V to 5 V range. These characteristics make it practical for industrial monitoring, portable instrumentation, and embedded sensor systems where low power, small PCB area, and deterministic digital communication are more important than rapid transient sampling.

Typical uses include bridge or ratiometric sensor measurement, current-shunt monitoring, battery-cell voltage acquisition, laboratory data logging, and low-frequency process-control instrumentation. Differential inputs help reject common-mode disturbance when the transducer is referenced near the converter ground, although the input source impedance and settling behavior must be considered in the analog front end.

PCB implementation should keep the analog input traces compact, provide a low-impedance return path, and decouple the supply close to the device. Allow adequate settling time after changing the I²C configuration or channel selection, and confirm that the selected conversion mode satisfies the required measurement bandwidth. This page combines device specifications, same-package alternatives, application guidance, and practical design notes to support component selection and PCB implementation.

Drop-in-Alternativen für MCP3422A3-E/SN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MCP3422A3-E/SN (gleiche Bauform und Footprint) – abweichend in Package, Differential Input Range, Operating Temperature Range, Digital Interface, Supply Voltage Range.

Microchip Technology
Operating Temperature Range: -40°C to +125°C
Digital Interface: I2C
Microchip Technology
Package: 8-pin DFN (2 mm x 3 mm)
Differential Input Range: -2.048 V to +2.048 V
Operating Temperature Range: -40 °C to +125 °C
Microchip Technology
Operating Temperature Range: -40 °C to +125 °C
Supply Voltage Range: 2.7 V to 5.5 V
Microchip Technology
Package: 8-pin SOIC, 3.90 mm width
Operating Temperature Range: -40 °C to +125 °C
Digital Interface: I2C

MCP3422A0-E/SN

✅ Drop-In
Microchip Technology
📦 8-pin SOIC
Delta-sigma (ΔΣ) · Up to 18 bits · 2 channels · Differential · 2.048 V · ±2.048 V · 2.7 V to 5.5 V · Two-wire I2C-compatible serial interface

Preis auf Anfrage

Datenblatt ansehen →

MCP3422A1-E/SN

✅ Drop-In
Microchip Technology
📦 8-pin SOIC
Delta-sigma ADC · Up to 18 bits · 2 channels · Differential · 2.048 V · -2.048 V to +2.048 V · 3.75 samples/s · 3.3 V or 5 V

Preis auf Anfrage

Datenblatt ansehen →

MCP3422A6-E/SN

✅ Drop-In
Microchip Technology
📦 8-pin SOIC
18 bit · 2 channels · 1 sigma-delta ADC · 3.75 samples/s · Differential · 2.048 V · ±2.048 V · 4.096 V/PGA

Preis auf Anfrage

Datenblatt ansehen →

MCP3422A2-E/SN

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Microchip Technology
📦 8-pin SOIC
18 bit · 2 · Differential · Delta-sigma ADC · 4 samples per second · 2.048 V · -2.048 V to +2.048 V · 3.3 V or 5 V

Preis auf Anfrage

Datenblatt ansehen →

MCP3422A3T-E/SN

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 8-pin SOIC
Same A3 electrical configuration and 8-pin SOIC footprint, with an order-code variation for temperature or tape-and-reel handling

📋 Referenzalternative (nicht im Katalog)

MCP3422A3-E/SN Grenzwerte & elektrische Eigenschaften

ADC Resolution 18 bit
Number of Input Channels 2 channels
Input Architecture Differential input
Conversion Topology 1 sigma-delta converter
Conversion Rate 3.75 samples/s
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Supply Voltage Range 2.7 V to 5 V
Digital Interface 2-wire I²C-compatible serial interface
Gehäuse 8-pin SOIC
Montageart Surface mount
Automotive Classification Automotive

MCP3422A3-E/SN 8-pin soic Pinbelegungsleitfaden

Pinbelegung für MCP3422A3-E/SN (8-pin soic-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für MCP3422A3-E/SN im 8-pin soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MCP3422A3-E/SN.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MCP3422A3-E/SN ist geeignet für 6 Anwendungs: Industrial Pressure Sensor Acquisition, Battery Cell Voltage Monitoring, Current Shunt Measurement, Portable Environmental Monitoring, Precision Temperature Instrumentation, Laboratory Data Logging.

🏭

Industrial Pressure Sensor Acquisition

The MCP3422A3-E/SN fits slow industrial pressure measurements where 18-bit resolution is more useful than high conversion bandwidth. Its two differential input channels can support a sensor front end that rejects common-mode voltage, while the onboard 2.048 V reference provides a defined differential range of ±2.048 V. With a 3.75-sample-per-second rate, the converter is appropriate for pressure, vacuum, and hydraulic monitoring where values change on a seconds-scale basis. The designer should use low-noise sensor excitation, maintain a low-impedance analog return, and verify that the complete signal remains within the converter's input limits.

⚡

Battery Cell Voltage Monitoring

The MCP3422A3-E/SN is suitable for low-rate battery monitoring when the system needs high-resolution voltage measurements without rapid sampling. Its 18-bit converter can resolve small changes in cell voltage, while the 2.7 V to 5 V operating range supports embedded battery-monitoring electronics. The onboard 2.048 V reference and differential inputs help establish repeatable measurements. However, series resistance, cell-connection error, and the ADC input network can dominate accuracy, so the PCB and calibration process should account for those effects rather than treating converter resolution as total system accuracy.

⚡

Current Shunt Measurement

The MCP3422A3-E/SN can measure low-frequency current through a shunt when the differential voltage across the shunt remains inside the ±2.048 V range. Differential input handling helps suppress supply and ground disturbances that would otherwise appear in the measurement. The device's 18-bit resolution supports high sensitivity, and its 3.75-sample-per-second rate is appropriate for energy accounting, motor-current trends, and thermal supervision rather than waveform protection. A Kelvin connection, careful shunt placement, and an RC input network are important for achieving useful accuracy and avoiding pickup from adjacent switching nodes.

🧩

Portable Environmental Monitoring

The MCP3422A3-E/SN suits portable temperature, humidity, and gas-sensor systems that report slowly changing environmental values. Its low conversion rate of 3.75 samples per second reduces the demand on battery capacity compared with continuous high-rate acquisition, while the 18-bit result can preserve fine sensor changes. The 2.7 V to 5 V supply flexibility supports both 3.3 V and 5 V embedded designs. A practical implementation should keep the analog sensor path away from display and wireless circuitry, use local reference and supply decoupling, and avoid adding capacitive loading that would upset the converter's acquisition behavior.

🌐

Precision Temperature Instrumentation

The MCP3422A3-E/SN is appropriate for resistance-based temperature probes and low-level thermocouple front ends when very slow measurements are acceptable. Its 18-bit sigma-delta conversion and differential inputs support accurate bridge or ratiometric measurements, while the onboard 2.048 V reference helps define excitation and conversion behavior. The device's 3.75-sample-per-second rate is suitable for thermal monitoring and calibration stations, not fast thermal-transient analysis. Designers should use matched input filtering, verify cold-junction or reference-junction compensation, and include calibration coefficients appropriate to the probe and analog network.

🖥️

Laboratory Data Logging

The MCP3422A3-E/SN can form the measurement core of a compact laboratory logger for slowly varying voltages. Two differential channels, 18-bit resolution, an integrated 2.048 V reference, and an I²C-compatible interface make it useful for recording control outputs, sensor conditions, and test-fixture voltages. Its 3.75-sample-per-second rate is adequate for many environmental and process measurements. For dependable logs, the host should timestamp each conversion, handle I²C bus errors, implement input-overrange detection, and preserve calibration information with the recorded data.

What is the MCP3422A3-E/SN?
The MCP3422A3-E/SN is an 18-bit, dual-channel sigma-delta ADC with differential inputs, a 3.75-sample-per-second conversion rate, and an 8-pin SOIC package. According to the Microchip MCP3422 product page, it includes a precision 2.048 V reference and a two-wire I²C-compatible interface. It is intended for low-noise measurement of slowly changing analog signals.
What is the operating voltage of MCP3422A3-E/SN?
The MCP3422A3-E/SN operates from a single 2.7 V to 5 V supply. The manufacturer identifies the device as a two-channel, low-noise, high-accuracy delta-sigma converter with differential inputs and up to 18 bits of resolution. Operating from the same supply range as common 3.3 V and 5 V embedded systems simplifies rail selection, although each board still requires suitable supply decoupling.
What is the input voltage range of MCP3422A3-E/SN?
The MCP3422A3-E/SN supports a differential input range of ±2.048 V when its onboard 2.048 V precision reference is used. According to the Microchip MCP3422 product page, this reference establishes the converter's differential measurement range. The selected input mode, gain configuration, and analog front end must be designed so that neither input exceeds the device's permitted absolute limits.
How fast does the MCP3422A3-E/SN convert analog signals?
The MCP3422A3-E/SN performs conversions at 3.75 samples per second. This rate suits temperature, pressure, strain, and other low-frequency sensors rather than high-bandwidth waveform capture. The conversion speed also affects how quickly the serial interface can present a new result, so the host should schedule reads and configuration changes in accordance with the device's timing requirements.
Where can I download the MCP3422A3-E/SN datasheet PDF?
The MCP3422A3-E/SN datasheet and product documentation can be reached through the official Microchip MCP3422 product page at https://www.microchip.com/en-us/product/MCP3422. Use the manufacturer datasheet for the authoritative pin description, electrical characteristics, timing information, and recommended application circuit. The -E/SN ordering code identifies the 8-pin SOIC package variant.
Where can I find the MCP3422A3-E/SN pinout?
The MCP3422A3-E/SN pinout is documented in the pin-description table of the Microchip manufacturer datasheet. The device is offered in an 8-pin SOIC package, so PCB designers should compare all eight numbered pins before assigning signals. Use that table when routing I²C, supply, reference, ground, and differential analog-input connections rather than inferring pin functions from other SOIC ADC variants.
MCP3422A3-E/SN vs MCP3422A1-E/SN: which is better for a slow sensor?
The MCP3422A3-E/SN is generally the better choice when very low conversion frequency and high-resolution slow-signal acquisition are priorities. The MCP3422A1-E/SN offers a much faster conversion rate but does not provide the same operating mode for applications requiring the A3's low-rate behavior. Both are 18-bit SOIC-8 family parts, but the final selection should match the required bandwidth, gain, and acquisition timing.
What is the difference between MCP3422A3-E/SN and MCP3422A6-E/SN?
The MCP3422A3-E/SN converts at 3.75 samples per second, while the MCP3422A6-E/SN belongs to a faster-conversion member of the same SOIC-8 family. Because the A3 emphasizes low-rate, high-resolution acquisition and the A6 emphasizes speed, the A3 is preferable for slow-changing sensor signals while the A6 is preferable when shorter update intervals are required. Confirm operating-mode and gain details in the manufacturer datasheet.
Can MCP3422A0-E/SN replace MCP3422A3-E/SN?
The MCP3422A0-E/SN is a same-package SOIC-8 option from the same converter family and can serve as a replacement when its supported gain and conversion settings satisfy the application. The main engineering work is checking the required differential input range and acquisition timing because A0 and A3 are different gain or conversion-rate variants. A PCB footprint match alone does not remove the need to verify operating parameters.
What is the best drop-in replacement for MCP3422A3-E/SN?
The MCP3422A0-E/SN and MCP3422A1-E/SN are the closest same-package candidates identified for the MCP3422A3-E/SN because all use an 8-pin SOIC footprint. Selection should favor whichever alternative provides the required conversion mode, gain range, and update interval. No cross-brand drop-in replacement was established, so an existing board should not be changed to an unrelated manufacturer without a complete pin, timing, and accuracy review.
Is there a Microchip equivalent for MCP3422A3-E/SN in an 8-pin SOIC?
Microchip's MCP3422 family includes several 8-pin SOIC options, including MCP3422A0-E/SN, MCP3422A1-E/SN, MCP3422A2-E/SN, and MCP3422A6-E/SN. These are same-family alternatives rather than unrestricted substitutes because their gain options and conversion rates differ. Select the exact variant that preserves the required 18-bit measurement mode, differential range, and sampling schedule.
When should I choose MCP3422A3-E/SN over a faster ADC?
Choose MCP3422A3-E/SN when the measured signal changes slowly, high resolution is more valuable than rapid acquisition, and a 3.75-sample-per-second update rate is sufficient. Its delta-sigma architecture, onboard 2.048 V reference, and differential inputs suit precision sensor measurement. Use a faster ADC instead when transient waveforms, alarms, or control loops require sampling frequencies substantially above 3.75 samples per second.
Is MCP3422A3-E/SN suitable for industrial sensor measurement?
The MCP3422A3-E/SN is suitable for many industrial sensor-measurement systems that operate at low frequency and require differential input handling. Its 2.7 V to 5 V supply range, 18-bit resolution, integrated 2.048 V reference, and I²C interface align with embedded acquisition designs. Industrial suitability must also be evaluated against the application's temperature range, EMC requirements, calibration needs, and isolation requirements.
How should I design the analog input for MCP3422A3-E/SN?
Design the analog front end around the converter's differential inputs and ±2.048 V range when using the onboard reference. Keep sensor and input traces short, connect the converter ground to a low-impedance return path, and place supply decoupling close to the device. Because the conversion rate is only 3.75 samples per second, allow the circuit to settle before sampling and avoid relying on the ADC to reject large out-of-range transients.
Where can I buy MCP3422A3-E/SN online?
Use the Request a Quote form on this page to request availability, lead time, and commercial terms for the exact MCP3422A3-E/SN ordering code. The -E/SN suffix identifies the 8-pin SOIC variant, so the quote should specify that complete MPN. Buyers should also confirm production quantities, packaging requirements, and the authorized supply channel before placing the order.
What are the key specifications of MCP3422A3-E/SN that engineers should know?
The MCP3422A3-E/SN combines 18-bit resolution, two differential input channels, a 3.75-sample-per-second conversion rate, an onboard 2.048 V reference, and a 2.7 V to 5 V operating supply. According to the Microchip MCP3422 product page, the differential input range is ±2.048 V with the internal reference. The device communicates through a two-wire I²C-compatible interface and is packaged in 8-pin SOIC.

Technische Referenzdaten für MCP3422A3-E/SN – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MCP3422A3-E/SN for low-frequency, high-resolution measurements where 18-bit conversion, differential inputs, an onboard 2.048 V reference, and a 3.75-sample-per-second update rate align with the system. Choose MCP3422A1-E/SN when the same family and SOIC-8 footprint are useful but substantially faster acquisition is required. Choose MCP3422A0-E/SN when its gain and conversion-mode configuration provides a better match to the input range while retaining the same package. Choose MCP3422A6-E/SN when higher conversion performance is needed more than the A3's low-rate operating behavior. In every case, verify the complete ordering code, pin arrangement, gain configuration, differential range, timing, temperature requirements, and acquisition timing before redesigning or substituting the device.

Vergleich mit Alternativen

Parameter Dieses Produkt MCP3422A0-E/SN MCP3422A1-E/SN MCP3422A6-E/SN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
ADC Resolution 18 bit 18 bit 18 bit 18 bit
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels

Wichtigste Unterscheidungsmerkmale

  • Low-rate high-resolution conversion mode (vs. MCP3422A1-E/SN)
  • Integrated precision measurement reference (vs. MCP3422A0-E/SN)
  • Direct SOIC-8 family interchangeability (vs. MCP3422A6-E/SN)

Designhinweise

Route the two differential analog-input paths as short, symmetrical traces and provide a continuous ground reference close to the converter. Place supply-decoupling capacitors at the device's supply and ground pins, and keep the I²C routing separate from sensitive input traces where practical. Differential symmetry helps reduce conversion of PCB-induced disturbance into the measured result.

Do not select the converter solely from its 18-bit nominal resolution. Input noise, source impedance, reference error, PCB leakage, and calibration error can dominate the final measurement accuracy. Also account for the 3.75-sample-per-second conversion rate when configuring acquisition timing. A design that requires faster updates must use a faster converter or a different acquisition strategy.

Apply matched input filtering to both sides of a differential channel and verify the settling behavior at the selected gain and conversion mode. The differential pair should share comparable source impedances and geometry. If the sensor is remote, bring the signals close to the converter before amplification and use guarding or shielding as required to prevent common-mode pickup from becoming a measurement error.

Operate the MCP3422A3-E/SN from a clean 2.7 V to 5 V source and place local decoupling at the IC rather than relying on a distant bulk capacitor. Because the device includes an onboard 2.048 V reference, avoid noisy or high-impedance supply arrangements that could degrade reference stability. Validate the complete rail under the analog load and ensure power-up sequencing does not expose any input beyond its permitted limits.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The component is identified as automotive in a product listing, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was found. Confirm compliance for the exact ordering code with the manufacturer before release.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MCP3422A3-E/SN datasheet MCP3422A3-E/SN pinout MCP3422A3-E/SN specifications MCP3422A3-E/SN equivalent MCP3422A3-E/SN replacement MCP3422A3-E/SN cross reference MCP3422A3-E/SN vs MCP3422A1-E/SN MCP3422A3-E/SN SOIC-8 ADC MCP3422A3-E/SN price MCP3422A3-E/SN stock Microchip MCP3422A3-E/SN MCP3422A3-E/SN application circuit

Verwandte Bauteile & Begriffe

Microchip Technology MCP3422A3-E/SN MCP3422A0-E/SN MCP3422A1-E/SN MCP3422A2-E/SN MCP3422A6-E/SN MCP3422A3T-E/SN analog-to-digital converter ADC sigma-delta ADC delta-sigma converter data-acquisition IC differential input I²C 2-wire serial interface 18-bit resolution 2.048 V precision reference 3.75 samples per second 2.7 V to 5 V power supply SOIC-8 surface mount industrial sensor measurement battery monitoring current-shunt measurement
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen